• Geomechanics and Engineering
• /
• v.33 no.1
• /
• pp.19-27
• /
• 2023

A series of experiments were performed to evaluate the effects of activated carbon on the compressive strength and air content of Portland Cement Concrete (PCC). Activated carbon/PCC composites were prepared by mixing concrete components with commercial activated carbon granules with weight fractions of 0, 0.5%, 1%, and 2% to cement. All PCC specimens were then tested for compressive strength on 7, 14, 21, and 28 days. The experimental results showed that adding 0.5% of activated carbon increased the compressive strength significantly over the curing periods compared to the normal PCC without activated carbon. For the specimens has 0.5% activated carbon, the 7, 14, 21, and 28-day compressive strengths increased by 28.7%, 22.2%, 26.8%, and 22.9%, respectively. However, adding excessive amounts of more than 1% activated carbon had a minimal effect on the compressive strength or even decreased it, which agrees with other studies. Regarding the air contents of the mixtures, adding activated carbon decreased the air content from 3.6% to around 1.5%. The surface morphologies of fine aggregates and activated carbon particles were compared using a novel image processing technique. The results indicated that the surface of activated carbon significantly differs from that of aggregates.

• The Korean Journal of Applied Statistics
• /
• v.9 no.2
• /
• pp.13-23
• /
• 1996

In this paper, we consider the Marshall and Olkin's bivariate exponential model under random censorship for the distribution of failure times of a system with two components. We propose a bootstrap testing procedure for independence and compare the powers of it with other tests via Monte Carlo simulation.

• Journal of the Korean Data and Information Science Society
• /
• v.7 no.1
• /
• pp.93-104
• /
• 1996

In this paper, Marshall and Olkin's bivariate exponential distribution is assumed for stress and strength model. We derive the asymptotic distributions and construct some approximate confidence intervals for P(X

• Journal of Korean Society for Quality Management
• /
• v.18 no.2
• /
• pp.101-116
• /
• 1990

The objectives of this thesis are : first, to estimate the parameters and Pr[X < Y] in the Marshall and Olkin's Bivariate Exponential Distribution ; and secondly, to compare the Bayes estimators of Pr[X < Y] with maximum likelihood estimator of Pr[X < Y] in the Marshall and Olkin's Bivariate Exponential Distribution. Through the Monte Carlo Simulation, we observed that the Bayes estimators of Pr[X < Y] perform better than the maximum likelihood estimator of Pr[X < Y] and the Bayes estimator of Pr[X < Y] with gamma prior distribution performs better than with vague prior distribution with respect to bias and mean squared error in the Marshall and Olkin's Bivariate Exponential Distribution.

• Journal of applied mathematics & informatics
• /
• v.41 no.6
• /
• pp.1275-1301
• /
• 2023

This paper introduced the Weibull Marshall-Olkin Power Lomax (WMOPL) distribution. The statistical aspects of the proposed model are presented, such as the quantiles function, moments, mean residual life and mean deviations, variance, skewness, kurtosis, and reliability measures like the residual life function, and stress-strength reliability. The parameters of the new model are estimated using six different methods, and simulation research is illustrated to compare the six estimation methods. In the end, two real data sets show that the Weibull Marshall-Olkin Power Lomax distribution is flexible and suitable for modeling data.

• The Bulletin of The Korean Astronomical Society
• /
• v.25 no.2
• /
• pp.98-98
• /
• 2000

• Geotechnical Engineering
• /
• v.12 no.3
• /
• pp.17-34
• /
• 1996

The objective of this paper is to evaluate the asphalt mixture performance with pyrolyzed carbon black(CBP) and air -cooled iron blast furnace slag. Marshall mix design was performed to determine the optimum binder content, The optimum binder content ranged from 6.3 percent to 7.75 percent. Dynamic creep testing was carried out using mixtures at the optimum binder content. Based on the test results, the use of pyrolyzed carbon black and slag in the asphalt pavement showed a positive result, such as the increase of Marshall stability, the decrease of the strain rate and the decrease in the mix stiffness rate at high temperature(5$0^{\circ}C$) and 137.9 kPa confinement. Within the limits of this research. it was concluded that pyrolyzed carbon black as an additive and slag as a coarse aggregate could be used to produce an asphalt paving mixture that has good stability, stiffness, and rutting resistance.

• International Area Studies Review
• /
• v.14 no.1
• /
• pp.185-202
• /
• 2010

While it is often assumed that a country's trade balance will improve in the long-run if its currency is allowed to depreciate, this is not necessarily the case for specific industry. This paper is to examine the long-run relationships between trade balance and real exchange rate using bilateral data of SITC 10 Industry Classification for Korea vis-${\grave{a}}$-vis her trading partners Indonesia, India, China, Japan on a quarterly basis over the period of 1999Q1 to 2008Q4. I applied the recent panel cointegration technique to reduce the small sample problems and improving power performance of the relevant estimation and inference procedures. The results reveal evidence of the Marshall-Lerner Condition in Indonesia 2 industries, India 5 industries, Japanese 4 industries, Chinese 6 industries. Whole group's cointegration statistic of India, China, Japan was supported Marshall-Lerner Condition but Indonesia was rejected.

• Journal of English Language & Literature
• /
• v.54 no.1
• /
• pp.77-105
• /
• 2008

Even though Paule Marshall and Ishmael Reed have differences of gender, generation, and literary techniques, they share common points in dealing with cultural conflicts and racial discrimination in the United States as Afro-American Writers. As black minority writers, Marshall and Reed write out of a perspective of forced immigrant/fragmentary native consciousness. The purpose of this paper is to investigate the protagonist's reaction to racial prejudice, different cultures and their attempts to reconcile and to coexist with other races and their culture in these writers' representative works. Marshall's uniqueness as a contemporary black female artist stems from her ability to write from the three levels, that is, African American and Caribbean black. So, Marshall's Brown Girl, Brownstones represents an attempt to identify, analyze, and resolve the conflict between cultural loss/displacement and cultural domination/hegemony. Reed's Japanes by Spring offers a blistering attack upon the various cultural and racial factions of the academy and the bankrupt value systems in America. Reed's depiction of Jack London College's existing racial problems-later compounded by the cultural dilemmas that accompany the Japanese occupation of the institution-reveals his interest in highlighting the ways in which any monoculturalist ideology ultimately results in racist and culturally exclusive policies. Marshall's and Reed's novels provide opportunities for reader to explore various manifestations of intercultual and interethnic dynamics. They present the possibility of reconciliation and coexistence between different race and ethnic cultures through asserting a cultural hybridity and multiculturalism.

• Geomechanics and Engineering
• /
• v.33 no.1
• /
• pp.11-18
• /
• 2023

This study explores a new energy partitioning approach to determine the fracture toughness of 3-D printed pristine/recycled high density polyethylene (HDPE) blends employing the essential work of fracture (EWF) concept. The traditional EWF approach conducts a uniaxial tensile test with double-edge notched tensile (DENT) specimens and measures the total energy defined by the area under a load-displacement curve until failure. The approach assumes that the entire total energy contributes to the fracture process only. This assumption is generally true for extruded polymers that fracture occurs in a material body. In contrast to the traditional extrusion manufacturing process, the current 3-D printing technique employs fused deposition modeling (FDM) that produces layer-by-layer structured specimens. This type of specimen tends to include separation energy even after the complete failure of specimens when the fracture test is conducted. The separation is not relevant to the fracture process, and the raw experimental data are likely to possess random variation or noise during fracture testing. Therefore, the current EWF approach may not be suitable for the fracture characterization of 3-D printed specimens. This paper proposed a new energy partitioning approach to exclude the irrelevant energy of the specimens caused by their intrinsic structural issues. The approach determined the energy partitioning location based on experimental data and observations. Results prove that the new approach provided more consistent results with a higher coefficient of correlation.