• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• 제16권5호
• /
• pp.109-124
• /
• 2021

This study tried to verify the causal relationship that SMEs' organizational culture and self-efficacy would affect job crafting and job satisfaction. Unlike previous domestic studies that have been studied for organizational culture at the organizational level and self-efficacy at the individual level, this study tried to verify the interaction between job crafting and job satisfaction using different mechanisms as antecedent factors. In order to verify the research model of this study, questionnaires of 144 small and medium-sized enterprises (SMEs) workers located in Seoul and metropolitan areas were analyzed. Factor analysis and correlation analysis were performed to verify the reliability and validity of the research model on the relationship between variables, and empirical analysis was performed using regression analysis and mediation effect analysis to verify the hypothesis. The results of the study were first, that organizational culture and self-efficacy had a positive (+) effect on job crafting. On the other hand, relationship-oriented culture and hierarchical-oriented culture, which are sub-factors of organizational culture, were found to be insignificant. Second, organizational culture and self-efficacy were found to have a positive (+) effect on job satisfaction. On the other hand, it was found that market-oriented culture and hierarchical-oriented culture, which are sub-factors of organizational culture, were not significant. Third, job crafting was found to have a positive (+) effect on job satisfaction. On the other hand, it was found that the sub-factors of job crafting, disruptive job demands and social job resources, were not significant. This means that organizational culture partially affects job crafting and job satisfaction of SMEs, and job crafting also partially affects job satisfaction. The implications of this study are first, suggesting the meaning of SME organizational culture for stable and efficient human resource management for SMEs suffering from low productivity and high turnover rate. Second, it was meaningful to understand the possibility of introducing job crafting as an effective job management plan for SMEs. Third, in the current situation where there are few cases of practical introduction of job crafting, research on understanding job crafting for SMEs and improving job satisfaction is thought to be helpful in improving the productivity of SMEs.

• (The) Research of the performance art and culture
• /
• 제37호
• /
• pp.249-293
• /
• 2018

The Musical Theatre was a popular art genre that originated from the western musical tradition represented by the European opera. In the twentieth century, it bloomed around Broadway in the United States. It is also one of the commercial arts which is popularly loved by the public in the field of performing arts all over the world at present. Due to the nature of this genre, the development of dramas and the expression of characters use music, not words or gestures, as the main medium. And the style of music reacts sensitively to the taste of the public, not to a particular class. When Japan colonized Korea, the empire strongly believed modernization equaled westernization and Japan was the one who could awaken Korean. The Japanese colonial music education was intended to bring cooperation and obedience to Japan by forcibly injecting Japanese ideology and culture into Joseon people. The music education of colonialism with the textbook of the "Songs for public education(보통교육 창가집)" compiled by the Japanese government was a sparkstone for the conversion of the Korean musical identity to Japanese and Western music. In addition to the capitalistic economical mechanism for establishing a South Korean government friendly with the United States during the Cold War after liberation, and the rush of American Pop culture represented by 'the show stage in 8th US Arm' and 'movies' which are to be the influence of invisible 'new cultural imperialism', our traditional music was confined to the meaning of 'Korean music', meaning 'past music'. In Korea, after the liberation, the musical was introduced by the influx of American popular culture. In accordance with the cultural policy of Park Jeong-hee regime, which aimed to spread the 'healthy culture' through the modernization of traditional arts, 'The Yegreen(예그린악단)' was founded. However, the plan to create a contemporary performing art based on Korean national arts showed the possibility of success in 1966 with the success of , but soon after, they have been destined to fall into an institution that has lost their ability to operate on their own due to the suspension of the sponsorship of the regime. Due to the cultural imperialist strategy of the influence of Japanese imperialism's colonial music education and influx of American popular culture after liberation, in the early days of Korean musicals, our traditional aesthetic style brought about the situation of the 1960 's, which did not become an independent ethnic art through the exchange and expansion with Western music. This is the background of the western licensed musicals led by the Korean musical market in the 21st century as well as the main cause of musical creation based on western music.

• Journal of vocational education research
• /
• 제36권2호
• /
• pp.95-121
• /
• 2017

The vocational competency development training teacher must complete the training course for the training of vocational competency development training instructor and get the qualification of the vocational competency development training teacher from the Ministry of Employment & Labor with the criteria set by the Presidential Decree. Therefore, it can be said that H_university 's educational performance, which is the only vocational competency development training teacher in Korea and that plays a role of mass production in the labor market, has a great influence on vocational competency development training. The purpose of this study is to identify the problems through the analysis of actual condition of vocational competency development training education based on CIPP model, Furthermore, it was aimed to suggest improvement plan of qualification training education. In order to accomplish the purpose of the research, the present situation of the training course for the vocational competency development training teacher training students was grasped. And We conducted a survey to draw out the improvement plan and utilized the results of 173 copies. We conducted interviews by selecting eight subjects for in-depth analysis and Understand the details of the results of the surveys conducted. As a result of the study, positive responses were obtained from the educational objectives and educational resources in the context factors. On the other hand, there were negative opinions about the curriculum reflecting the learner and social needs. In the input factors, positive opinions were derived from the educational objectives and training requirements. However, there were many negative opinions about the achievement of the learner's educational goals. In addition, there were many negative opinions of online contents education. In the process factors, positive evaluation was high in class related part, learner attendance management, and institutional support. However, negative opinions were drawn on the comprehensive evaluation of qualification training period, and the learner's burden due to lack of learning period appeared to be the main reason. In the factor of calculation, Positive opinions were derived from the applicability of the business curriculum for training courses for training teachers who are in charge of education and training in industry occupations. However, there were negative opinions such as learning time, concentration of learning, and communication of instructors. Based on the results of the study, suggestions for improving the operation of vocational competency training teacher qualification training are as follows. First, it is necessary to flexibly manage the training schedule for the weekly training course for vocational competency development training teachers. Second, it is necessary to seek to improve the online education curriculum centered on consumers. Third, it is necessary to seek access to qualification training for local residents. Fourth, pre - education support for qualified applicants is required. Finally, follow-up care of qualified trainees is necessary.

• Journal of Korean Theatre Studies Association
• /
• 제49호
• /
• pp.5-47
• /
• 2013

Among the styles of performing arts, perhaps the genre that has attracted the largest audience would be musical. Popularity of musical has brought diverse changes in our performing arts market, and, upon emerging another musical genre, called 'Korean Traditional Musical Comedy,' it has been well-received by the audiences. 'Korean Traditional Musical Comedy' is a word that are formed by merging two other terms such as 'Korean Traditional Music' and 'Musical (Comedy).' In the meantime, however, it has yet some problems in order to be defined as the genre that has concrete concepts. It is because the term such as Korean Traditional Musical Comedy was created being closely associated with a marketing purpose rather than a term that defines the characteristics of a genre of performing arts. Although this new musical genre has drawn attentions of many audiences by adding 'Musical Comedy' to 'Korean Traditional Music' that was not quite popular to the public, it still does not have any established forms so that there is a fine line between "Korean Traditional Musical Comedy" and another genre like traditional style folk opera ("Changgeuk"). Looking at the characteristics of the musical work called 'Korean Traditional Musical Comedy, in general, first of all, it is a performance where music and drama are played. Here, the distinctive characteristic of this musical is that 'Korean Traditional Music' is sung. And the kinds of Korean traditional musics being sung are mainly Pansori (dramatic story-singing) and folk-songs, and, in most cases, Korean traditional musical instruments are being used as accompanying music. In this paper, the researcher investigated the aspects of experiment centering around Korean Musical Group, Taroo. These days, various experiments has been repeated not only for the works of Taroo but other musical work presently called 'Korean Traditional Musical Comedy' also. Having encompassed overall performance factors including use of musical instruments, dance, acting, materials for drama as well as music in drama, the researcher has gone through experiments repeatedly. Meanwhile, however, the subject matters that make 'Korean Traditional Musical Comedy' mostly attractive to the audiences are music and songs or sounds. ["Sori" also called "Chang" (唱)] Particularly, under the current situation of our musicals, the role of "Sori" is extremely important. The factor that plays absolutely most important role in acceptance and transformation of "Sori" is the created Pansori. Since the created Pansori is composed with new rhythmic patterns and new narrative poems, it tells the present story. Also it draws good responses from the audiences owing to easy conveyance of dialogues. And, its new style brings diversification to organization of musical instruments, so then this leads to the arrangements of music for Korean traditional music instruments, as well as instrumental music ensemble, orchestra, and jazz band, etc. Likewise, upon appearing creative musics in 'Korean Traditional Musical Comedy,' professional music and vocal compositions have begun to emerge naturally. And, the song specialist and writer, of course, staffs including direction, lighting, and sounds, etc are required. That is, professional composition method are forced to be introduced to all areas. Other than this, there are many music pieces which are based on our unique songs and sounds ("Sori") and such traditional factors as use of lead singer for ceremony or chorus, and the method that puts weight on Pansori. Accordingly many things accomplished. However, it is required that 'Korean Traditional Musical Comedy' go through numerous discussions and more experiments. Above all, the most important things are the role of actor and actress, and their changes, and training of actor and actress further. Good news is there are good audience responses. 'Korean Traditional Musical Comedy' is an open genre. As musicals are divided into several domains according to the characteristics thereof, 'Korean Traditional Musical Comedy' will be able to show its distinctive features in various styles according to embodiment.

• The Korean Journal of Air & Space Law and Policy
• /
• 제33권2호
• /
• pp.291-314
• /
• 2018

In recent 3 years, Korea's low-cost airlines have expanded their areas of passenger transportation not only to domestic market but also to Japan, China, Southeast Asia and US territory as a total of 6 companies (8 airlines including small air operation business carriers). Currently, three more airlines have filed for air transportation business certification as future low-cost carriers, and this expansion is expected to continue. To cope with the aggressive airline operations of domestic and foreign low-cost carriers and to enhance their competitiveness, each low-cost airline is taking a number of strategies for promoting cabin service. Therefore, the workload of the cabin crew is increased in proportion to the expansion, and the fatigue directly connected with the safety task performance is increased. It is stipulated in the Enforcement Regulations of the Korea Aviation Safety Act that at minimum, one cabin crew is required per 50 passenger seating capacity, and all low cost carriers are boarding only the minimum cabin crew. Sometimes it is impossible for them to sit in a floor level emergency exit for evacuation, which is the main task of the cabin crew, and this can cause confusion among evacuating passengers in the event of an emergency. In addition, if one of the minimum cabin crew becomes incapacitated due to an injury or the like, it will become a serious impediment in performing emergency evacuation duties. Even in the normal situation, since it will be violating the Act prescription on the minimum cabin crew complement, passengers will have to move to another available airline flights, encountering extreme inconvenience. Annex 6 to the Convention on International Civil Aviation specifies international standards for the determination of the minimum number of cabin crew shall be based only on the number of passenger seats or passengers on board for safe and expeditious emergency evacuation. Thereby in order to enhance the safety of the passengers and the crew on board, it is necessary to consider the cabin crew's fatigue that may occur in the various job characteristics (service, safety, security, first aid)and floor level emergency exit seating in calculating the minimum number of cabin crew. And it is also deemed necessary for the government's regulatory body to enhance the cabin safety for passengers and crew when determining the number of minimum cabin crew by reflecting the cabin crew's workload leading to their fatigue and unavailability to be seated in a floor level emergency exit on low cost carriers.

• The Southeast Asian review
• /
• 제28권1호
• /
• pp.21-51
• /
• 2018

This article takes several approaches in explaining recent developments in Vietnam. First, it draws upon an array of sources that idealize Vietnam's embrace of capitalism and integration into the global market in order to sketch out its economy's progress in 2017. Second, it observes, evaluates, and diagnoses recent changes in the Vietnamese economy in the medium to long term by incorporating conflicting perspectives on Vietnam's performance as a capitalist country. Third, this article traces the power shifts that have risen from internal struggles in the Communist Party over political and social issues. Fourth, it elaborates on the aforementioned impact that foreign relations have had on socio-political developments in Vietnam, as well as the government's response. In so doing, it also attempts to evaluate, however briefly, the significance of the 25th anniversary of South Korea-Vietnam relations. Finally, it examines the public's reaction to the post-reform transitions in light of recent sociocultural changes. 2017 was a memorable year for Vietnam: a continuous march toward capitalism; the resulting expansion of the Vietnamese people's demands; political controversies and government control; the looming instability of United States-China relations and various attempts to address the situation. These events will inevitably replicate themselves in the future as the ostensibly socialist Vietnam adopts a capitalist model. The problem is that it is unclear whether these experiences will continue with the consent of the people of socialist Vietnam or engender resistance. It is difficult to achieve meaningful consent in the status quo of worsening inequalities, widespread corruption, monopoly on power, and sustained use of unskilled low-wage workers. In other words, when concerns such as welfare, public health, and the environment are set aside in favor of economic development and commercialization as they have been, discontent, rather than consent, will prevail. It is thus important to keep a watchful eye on the viability of the nominal economic growth, surface-level political stability, and strategic responses to foreign relations that took place in 2017.

• Journal of the Microelectronics and Packaging Society
• /
• 제27권4호
• /
• pp.83-89
• /
• 2020

For the past few decades, as part of efforts to protect the environment where fossil fuels, which have been a key energy resource for mankind, are becoming increasingly depleted and pollution due to industrial development, ecofriendly secondary batteries, hydrogen generating energy devices, energy storage systems, and many other new energy technologies are being developed. Among them, the lithium-ion battery (LIB) is considered to be a next-generation energy device suitable for application as a large-capacity battery and capable of industrial application due to its high energy density and long lifespan. However, considering the growing battery market such as eco-friendly electric vehicles and drones, it is expected that a large amount of battery waste will spill out from some point due to the end of life. In order to prepare for this situation, development of a process for recovering lithium and various valuable metals from waste batteries is required, and at the same time, a plan to recycle them is socially required. In this study, we introduce a nanoscale pattern transfer printing (NTP) process of Li2CO3, a representative anode material for lithium ion batteries, one of the strategic materials for recycling waste batteries. First, Li2CO3 powder was formed by pressing in a vacuum, and a 3-inch sputter target for very pure Li2CO3 thin film deposition was successfully produced through high-temperature sintering. The target was mounted on a sputtering device, and a well-ordered Li2CO3 line pattern with a width of 250 nm was successfully obtained on the Si substrate using the NTP process. In addition, based on the nTP method, the periodic Li2CO3 line patterns were formed on the surfaces of metal, glass, flexible polymer substrates, and even curved goggles. These results are expected to be applied to the thin films of various functional materials used in battery devices in the future, and is also expected to be particularly helpful in improving the performance of lithium-ion battery devices on various substrates.

• Korean small business review
• /
• 제42권3호
• /
• pp.221-243
• /
• 2020

The purpose of this study is to research the effects of desire for independence, possibility of start-up success and employment stability to the push-entrepreneurship through the push-entrepreneurship by a survey of employees in the middle age. The purpose of the creating start-up environment was encouraged the qualitative expansion of opportunity-driven start-up rather than the quantitative expansion of necessity-driven start-up for the economic growth and expanding employment. In spit of the employees had their own careers, skills, opportunities and market-experiences, In reality it is necessity-driven start-up that the quantitative expansion. The purpose of this study was to reflect process change by desire for independence, push-entrepreneurship and pull-entrepreneurship based on the possibility of start-up success and employment stability perceived by individual founders, changed process factor rather than the fixed result factor. The results are as follows. First, it was found that desire for independence makes a positive (+) effect on the pull-entrepreneurship and the push-entrepreneurship. Second, it was found that the possibility of start-up success makes a positive (+) effect on the pull-entrepreneurship and not effect on push-entrepreneurship. third, it was found that the employment stability makes a positive (+) effect on the pull-entrepreneurship and not effect on the push-entrepreneurship. Forth, it was found that desire for independence makes a positive (+) effect on the pull-entrepreneurship and mediating negative (-) effect on the push-entrepreneurship. The implication of this study was that potential entrepreneurs with desire for independence, rather than necessity-driven start-up due to unemployment, could be developed as pull-entrepreneurship improved the situation of push-entrepreneurship. In addition, it seems that entrepreneurship education and activation of entrepreneurship programs for employee with desire for independence expand opportunity-driven start-up after retirement.

• Environmental and Resource Economics Review
• /
• 제31권2호
• /
• pp.165-204
• /
• 2022

This study organized data from 2000 to 2014 for 20 grid-connected countries in Europe and analyzed the determinants of carbon emissions through the panel GLS method considering the problem of heteroscedasticity and autocorrelation. At the same time, the effect of introducing ETS was considered by dividing the sample period as of 2005 when the European emission trading system was introduced. Carbon emissions from individual countries were used as dependent variables, and proportion of generation by each source, power self-sufficiency ratio of neighboring countries, power production from resource-holding countries, concentration of power sources, total energy consumption per capita in the industrial sector, tax of electricity, net electricity export per capita, and size of national territory per capita. According to the estimation results, the proportion of nuclear power and renewable energy generation, concentration of power sources, and size of the national territory area per capita had a negative (-) effect on carbon emissions both before and after 2005. On the other hand, the proportion of coal power generation, the power supply and demand rate of neighboring countries, the power production of resource-holding countries, and the total energy consumption per capita in the industrial sector were found to have a positive (+) effect on carbon emissions. In addition, the proportion of gas generation had a negative (-) effect on carbon emissions, and tax of electricity were found to have a positive (+) effect. However, all of these were only significant before 2005. It was found that net electricity export per capita had a negative (-) effect on carbon emissions only after 2005. The results of this study suggest macroscopic strategies to reduce carbon emissions to green growth, suggesting mid- to long-term power mix optimization measures considering the electricity trade market and their role.

• Economic and Environmental Geology
• /
• 제56권6호
• /
• pp.781-797
• /
• 2023

Recently, there has been a rapid response from mineral-demanding countries for securing critical minerals in a high tech industries. Graphite, while overwhelmingly dominated by China in production, is changing in global supply due to the exponential growth in EV battery sector, with active exploration in East Africa. Rare earth elements are essential raw materials widely used in advanced industries. Globally, there are ongoing developments in the production of REEs from three main deposit types: carbonatite, laterite, and ion-adsorption clay types. While China's production has decreased somewhat, it still maintains overwhelming dominance in this sector. Recent changes over the past few years include the rapid emergence of Myanmar and increased production in Vietnam. Nickel has been used in various chemical and metal industries for a long time, but recently, its significance in the market has been increasing, particularly in the battery sector. Worldwide, nickel deposits can be broadly classified into two types: laterite-type, which are derived from ultramafic rocks, and ultramafic hosted sulfide-type. It is predicted that the development of sulfide-type, primarily in Australia, will continue to grow, while the development of laterite-type is expected to be promoted in Indonesia. This is largely driven by the growing demand for nickel in response to the demand for lithium-ion batteries. The global lithium ores are produced in three main types: brine lake (78%), rock/mineral (19%), and clay types (3%). Rock/mineral type has a slightly higher grade compared to brine lake type, but they are less abundant. Chile, Argentina, and the United States primarily produce lithium from brine lake deposits, while Australia and China extract lithium from both brine lake and rock/mineral sources. Canada, on the other hand, exclusively produces lithium from rock/mineral type. Vanadium has traditionally been used in steel alloys, accounting for approximately 90% of its usage. However, there is a growing trend in the use for vanadium redox flow batteries, particularly for large-scale energy storage applications. The global sources of vanadium can be broadly categorized into two main types: vanadium contained in iron ore (81%) produced from mines and vanadium recovered from by-products (secondary sources, 18%). The primary source, accounting for 81%, is vanadium-iron ores, with 70% derived from vanadium slag in the steel making process and 30% from ore mined in primary sources. Intermediate vanadium oxides are manufactured from these sources. Vanadium deposits are classified into four types: vanadiferous titanomagnetite (VTM), sandstone-hosted, shale-hosted, and vanadate types. Currently, only the VTM-type ore is being produced.