• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.14-21
• /
• 2011

A unit modular system is a construction method which installs on site by manufacturing 50%~90% of the whole process in the factory. This method can minimize the process in the site and maximize the operation, which will reduce the duration and improve the overall quality. The recent paradigm of construction is to be sustainable building. Modular system can be regarded as a sustainable building construction method because it can reduce the amount of construction waste by recycling partial or whole part of overdue building be torn down. A unit modular system is the answer to cope with the increasing market of small size housings. A unit modular system is the most appropriate option at this point. This research proposes the standard operation and construction process of modular system, which enable to optimal system. A case study of reconstructing small-size housing was introduced to support this proposal. Finished unit modular is the reasonable way. However, 80% of complication rate of the modular is the most rational when a defect occurrence during delivery is considered.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.5
• /
• pp.1-8
• /
• 2010

Clients require easy to use of product and operating and industry safety according to the change of a market and a factory. For overcoming it, this paper developed controller of take-out robots that take high speed and superprecision and supplement a week point as use the system based on network. development controller classify teaching pendant and center server PC. Center server PC service the information about all process to supervisor. Teaching pendant is the bridge that service various faculties such as control, user recognition, metallic pattern operation to the user using injection molding. The controller development for taking out injection molded body classify software and hardware. The development of software is divided into three step which is application program, user interface and device driver. the simple device driver is not classified and included in application program. The hardware induce the touch panel and wireless network and construct the effective process control and internet connection. The inject ion cycle of existing system was five second but advanced system has the inner four cycle, process efficiency and product operation through wireless network.

• Journal of Aquaculture
• /
• v.16 no.2
• /
• pp.104-109
• /
• 2003

The present study aims to evaluate protein and phosphorus availabilities of five different dietary protein sources during the 6-week feeding trial in juvenile olive flounder, Paralichthys olivaceus as determined by growth performance and phosphorus retention. Five diets containing blood meal (BM), poultry by-product (PBP), squid liver powder (SLP), feather meal (FM) and soybean meal (SM) were prepared by mixing a basal diet (BD) with one of five test ingredients at the ratio of 7 to 3. As a reference diet, BD contains three different protein sources such as white fish meal, casein and gelatin. After 2 weeks of the conditioning period, fish initially averaging 2.7$\pm$0.02g (mean$\pm$SD) were randomly distributed into each aquarium as a group of 30 fish reared in the recirculating system. Fish of triplicate groups were fed one of six experimental diets (BD+five test diet). After 6-week feeding trial, pro- tein efficency ratio (PER) of fish fed BM diet was the lowest in experiment groups. While fish fed PBP diet showed a significant higher PER as compared to the FM diet, and fish fed SLP diet and BD were a higher PER than did fish fed PBP diet. However, there was no significant difference in PER among fish fed SLP diet, BD and SM diet, and between SM diet and PBP diet. Phosphorus retention efficiency of bone (PR $E_{b}$) of fish fed BM diet was the lowest in all the diets, and fish fed FM diet showed a higher PE $R_{b}$ than fish fed BD and SM diet. However, there was no significant difference in PER among fish fed FM diet, SLP diet and PBP diet, and among SLP diet, PBP diet, SM diet and BD. These results indicate that SLP could be a suitable protein source for low pollution diets of olive flounder in the future fish feeds market. Furthermore, PBP and SM are available protein source to reduce P waste in the oliver flounder aquaculture with the use of proper mixture of other protein sources and more processing to improve protein availibility of these.ese.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.20-40
• /
• 2003

Since unloaded Q-value of a high-temperature superconductor(HTS) filter is very high, a bandpass filter(BPF) and a lowpass filter(LPF) with an increase of pole numbers can be fabricated without an increase of an insertion loss(IL) ; recently a 70-pole BPF is developed in USA. They have an abrupt skirt property and an excellent attenuation level for out-of band. Moreover, they can be miniaturized when lumped element resonators or the slow-wave characteristic are used. Technology of fabricating a HTS epitaxial film as well as a film of a 4 inch area also makes the planar type filter with a various structure and an enhanced power handling capability possible. Recently, the HTS filter subsystems composed of a planar-type HTS filters, a GaAs-based LNA and a mini-cryocooler are developed. The extended receiver front- end subsystems for mobile radio communications decrease the noise-figure level of the communication system and the frequency interference interacted adjacent bands, and increase the efficiency of frequency and the capacity of communication system. In this paper, theory for developing the HTS filter, its kinds, its design rules, its characteristics are reviewed. The feature of the research and market trends related to the HTS filter systems for the receiver front-end subsystem of mobile base station are surveyed.

• Journal of the Korean Home Economics Association
• /
• v.11 no.1
• /
• pp.3-13
• /
• 1973

This article has an aim to study what kind of housing system our ancestors lived with during the Yi-Dynasty by analyzing the house-plan of upper-class society of that period since the house of lower-class was very insignificant as it has always been while the house of upper-class represented the period. With this study we can clearly see how we ought to go in the right direction toward the development of our Korean genuine housing by renovating and renewing those unreasonable points in our traditional housing system. It is firmly believed that we should-keep our own unique traditional lovely housing system for being destroyed by the whirl-wind of modernization and the demand of rationalism and efficiency-centered idea of the western mind. From this view point we think it is very urgent to see this matter correctly and find out the real way how we should do in order to keep our own good things for ourselves and make them preserved. This essay is divided into three parts as follows : 1. Thoughts on selecting the good housing area. 2. The aspect of housing reflected upon composing the house-plan. 3. The characteristic sentiments reflected upon the interior construction and decoration. We can find several characteristic points in the housing system of the Yi-Dynasty as follows : 1. In Korea, the thought of natural geography (Poongsu-seul), apart fro scientific view, which seems rather superstitious to us, modern young people, has been highly recommended by the people of our country from old days connected with the prosperity of our life. They also neglected about the social circumstances such as, market, transportation, and education, which are now considered as very important. They only put their concern on this natural environment which they called Poongsu. 2. In construction of house-plan, the house was not built for living with reasonable convenience, but for showing prestige of the upper-class people reflecting its social organization under the feudalism of the period. Furthermore, the most of the housework was done actually by those servants and maids of the house, and not the family themselves. The only concern for the upper-class people was to show off their authority, and so this sense of authority was revealed in the housing as well. 3. Both the outside appearance of the house and the interior decoration or the furniture are all very artistic and lovely. They were so refined and beautiful with their delicate taste which truly seem against our modern rationalism and uniformity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.12
• /
• pp.1705-1710
• /
• 2003

A small body size of Brown Tsaiya laying duck is desirable to reduce maintenance requirements, so the body weight at 40 weeks of age (BW40) has to be maintained at its current level. Egg weight has to be maintained at around 65 g to meet market requirements. Eggshell strength at 40 weeks of age (ES40) must to be increased in order to maintain a low incidence of broken eggs. Thus, number of eggs laid up to 52 weeks of age (EN52) has to be increased without negative correlated response on ES40. A new linear genetic selection index was used: $I_g=a_0{\times}GEW40\;(g)+a_1{\times}GBW40\;(g)+a_2{\times}GES40\;(kg/cm^2)+a_3{\times}GEN52\;(eggs)$ where GEW40, GBW40, GES40 and GEN52 were the multitrait best linear unbiased prediction (MT-BLUP) animal model predictors of the breeding values respectively of egg weight and body weight at 40 weeks of age (EW40, BW40), ES40 and EN52. The coefficients $a_0$, $a_1$, $a_2$ and $a_3$ were calculated with constraints of 0.0 g, 0.0 g and $0.013kg/cm^2$ for expected genetic gains in EW40, BW40 and ES40 respectively and maximum gain in EN52. Since 1997, the drakes and the ducks were selected according to their own indexes, with this new genetic selection index. From G0 to G4, the average per generation predicted genetic responses in female duck were +0.05 g for EW40, +0.92 g for BW40, $+0.035kg/cm^2$ for ES40 and +2.13 eggs for EN52. Which represented respectively 0.07%, 0.06%, 0.67% and 1.0% of the means of the EW40, BW40, ES40 and EN52. For ES40 and EN52, it represented also respectively 16.1% and 21.6% of the additive genetic standard deviation of these traits. Thevse results indicated that selection of laying Brown Tsaiya by a restricted genetic selection index and with MT-BLUP animal model could be an efficient tool for improving the efficiency of egg production, increasing egg shell strength and egg number while holding egg weight and body weight constants.

• The Journal of Society for e-Business Studies
• /
• v.15 no.3
• /
• pp.163-181
• /
• 2010

As a part of efforts to reduce the global emissions of greenhouse gases, the Kyoto Protocol was signed by major developed countries ("Annex I" countries). According to the Kyoto protocol, the Emission Trading Scheme that derives a trading market of the $CO_2$ emission rights is appeared. It causes that business institutions give lots of efforts to reduce $CO_2$ by using new environmentally sound technologies or increasing efficiency in production. On the while there have been several studies trying to develop a methodology to measure the effect of $CO_2$ reduction and its monetary value. In this research we suggest ECRE (Evaluation of $CO_2$ Reduction in E-transformation) model which can measure the $CO_2$ reduction effect through the introduction of G2B system. ECRC model was developed based on the IPCC methodology. ECRC model measures the two major effects of the $CO_2$ reduction which are '$CO_2$ reduction effect from transportation' and '$CO_2$ reduction effect from the decrease of paper use'. In this paper, we calculate the economic effect of $CO_2$ reduction with the case of the G2B system in Korea. This research suggests a basic methodology to measure the $CO_2$ reduction performance for the e-transformed institution.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.1
• /
• pp.62-72
• /
• 2010

PM OLED is used in many applications as one of the display for the next generation. The most essential problems are the power dissipation and the short life time in applying PM OLED into a commercial application. Many efforts are made in developing the panel and in improving the circuit for expanding the current market wider. The life time in PM OLED is expanded by lessening the power dissipation of the circuit for the magnitude of the driving current is lowered. It is possible to minimize the power dissipation from improving the driving technology. The classical technology, Row-to-Row driving, is that row is selected one by one while applying the column current input individually. The multi-line driving is a new technology which is to select multiple rows simultaneously while applying the column current as a whole. However, the solution of the multi-line driving is NP-complete problem. The efficiency is dependant on the sort of picture and the driving condition. This paper presents the new efficient multi-line driving which is that the multiple lines are selected by applying column current together after grouping the simultaneous driving group applying the gnew efficient muthe coi-line dr coefficient. Bengrouping the several rows which has the higher coi-line dr coefficient, the more efficient driving is realized to present the high quality image and to lessen the power dissipation and to stretch the life time in the PM OLED.

• Archives of design research
• /
• v.13 no.2
• /
• pp.73-80
• /
• 2000

In this study design information was separately defined form general product information and thus factors reflected in product design ion the basis of values and roles were extracted. The following is a classification of 5 different types of design factors divided according to their disposition. ·Innovation factor - element which previously did not exist or element related with explicit reformation ·Open factor - active element which not only improves current performance but also induces new functions through understanding of usage situations and new possibilities. ·Anterior factor - element which prolongs and develops the early development requirements of products through C.I. and P.I. related elements and characteristics of previous models and design strategy. Self-evidence factor - element related with function visualization through product structure which may make possible the consolidation of shape and function. Rigid factor - element, based on the human factors engineering, related with the safety and efficiency of users. This classification was obtained by defining major characteristics of products considering the target consumer and market characteristics. In this classification factor structuring design process which efficiently deducted a differentiated final product by synthesizing factors of higher importance as dominant factors was proposed. With this kind of factor structuring process, product differentiation may be achieved by bestowing individual characteristics to each product by combining design dominant factors associated with the product for a specific purpose from the stages of product concept development. Moreover, this may be used as an approach to actively correspond to the various and specific demands of the comsumer.

• Journal of Technology Innovation
• /
• v.21 no.1
• /
• pp.279-301
• /
• 2013

This study demonstrates how social network analysis can be used for identifying potential buyers in technology marketing; in such, the methodology and empirical results are proposed. First of all, we derived the three most important 'seed' keywords from 'technology description' sections. The technologies are generated by various types of R&D activities organized by South Korea's public research institutes in the fundamental science fields. Second, some 3, 000 words were collected from websites related to the three 'seed' keywords. Next, three network matrices (i.e., one matrix per seed keyword) were constructed. To explore the technology network structure, each network is analyzed by degree centrality and Euclidean distance. The network analysis suggests 100 potentially demanding companies and identifies seven common companies after comparing results derived from each network. The usefulness of the result is verified by investigating the business area of the firm's homepages. Finally, five out of seven firms were proven to have strong relevance to the target technology. In terms of social network analysis, this study expands its application scope of methodology by combining semantic network analysis and the technology marketing method. From a practical perspective, the empirical study suggests the illustrative framework for exploiting prospective demanding companies on the web, raising possibilities of technology commercialization in the basic research fields. Future research is planned to examine how the efficiency of process and accuracy of result is increased.