• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2002년도 춘계학술대회논문집
• /
• pp.29-34
• /
• 2002

As the makeup water entering the boiler feed water cycle usually contains corrosive gases, particularly oxygen and carbon dioxide, so the corrosive gases should be eliminated by a deaerator. While the other domestic companies have made a deaerator for land industrial field, our company has developed and is able to produce a spray & scrubber type deaerator for marine to maintain below the level of 7ppb of dissolved oxygen in the condensate. In this paper, we describe the principle, design technique and experimntal results of the spray & scrubber type deaerator.

• Journal of Advanced Marine Engineering and Technology
• /
• 제8권2호
• /
• pp.74-80
• /
• 1984

In the reduction gears for marine propulsion engine such as turbine or high speed diesel engine, the standard involute double helical gears are generally used. However the addendum modification gear can be used in the reduction gear as it has flexibility for gear design on the tooth strength, scoring and operating noise. In this case, the determination of gear shaft bearing load is difficult by the alternation of operating pressure angle. In this paper, the formulas of bearing load according to the arrangements of the reduction gears are derived and the diagrams of operating pressure angle according to the modification coefficient are presented.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 공동학술발표회
• /
• pp.110-110
• /
• 2017

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 추계학술발표회
• /
• pp.187-187
• /
• 2017

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2002년도 추계공동학술대회논문집
• /
• pp.7-12
• /
• 2002

해양레저의 기본적인 장비인 모터보트는 대부분 수입된 모터보트에 의존하고 있는 실정이다. 따라서 해양레저 및 모터보트 수요 확대에 대비하여 저가이면서 안전한 국산 모터보트를 개발하는 것이 요구된다. 그러나 해양레저용 모터보트의 국내 개발은 전무하다. 본 연구에서는 해양레저용 보급형 모처보트의 개발의 전 단계로써 모터보트의 개념 설계에 관하여 고찰하였다. 본 연구에서는 먼저 국내 레저선박 보유 현황 및 수요 예측에 대하여 간단히 고찰한다 또한 해외의 해양레지용 모터보트에 대한 벤치마킹을 수행한다. 그리고 해외 레저용 모터보트의 벤치마킹 결과에 기초한 보급형 모터보트의 요구 성능, 기본 제원의 범위, 필요 설비 등에 대하여 고찰한다. 마지막으로 보급형 모터보트의 선형석계 사례를 제시한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.562-577
• /
• 2014

A reliable steady/transient hydro-elastic analysis is developed for flexible (composite) marine propeller blade design which deforms according to its environmental load (ship speed, revolution speed, wake distribution, etc.) Hydro-elastic analysis based on CFD and FEM has been widely used in the engineering field because of its accurate results however it takes large computation time to apply early propeller design stage. Therefore the analysis based on a boundary element method-Finite Element Method (BEM-FEM) Fluid-Structure Interaction (FSI) is introduced for computational efficiency and accuracy. The steady FSI analysis, and its application to reverse engineering, is designed for use regarding optimum geometry and ply stack design. A time domain two-way coupled transient FSI analysis is developed by considering the hydrodynamic damping ffects of added mass due to fluid around the propeller blade. The analysis makes possible to evaluate blade strength and also enable to do risk assessment by estimating the change in performance and the deformation depending on blade position in the ship's wake. To validate this hydro-elastic analysis methodology, published model test results of P5479 and P5475 are applied to verify the steady and the transient FSI analysis, respectively. As the results, the proposed steady and unsteady analysis methodology gives sufficient accuracy to apply flexible marine propeller design.

• 한국의류산업학회지
• /
• 제14권6호
• /
• pp.977-982
• /
• 2012

We investigated the characteristics of subjects in marine leisure activities and the wearing conditions of a rash guard through a consumer survey. The questionnaire examined the number of rash guards owned by different styles, wearing size, choice of rash guard compared with ordinary clothes, and the satisfaction in a rash guard (color, textile, size, quality, price, function, and design) using Likeret Scales. The subjects were 105 adult men and the data analysis utilized an SPSS 20.0 Package. The results were significant for wearing conditions correspondent with the marine leisure activities. More years of experience resulted in a higher number of rash guards owned. A higher level of participation in sport resulted in more different styles of rash guards. More years of experience resulted in an increase preference for tight rash guards. In the case of wearing L and XL size that selected the smaller rash guard over the ordinary clothes, it was evaluated at "satisfaction" level in color, textile, size, quality, function, design. In the case of wearing XS, S and M size that did the larger and same as ordinary, it was at "ordinary" level and bellow.

• 한국해양환경ㆍ에너지학회지
• /
• 제18권1호
• /
• pp.15-21
• /
• 2015

본 연구에서는 이산화탄소 해양지중저장을 위한 운송 수단으로 활용될 $CO_2$ 운송선의 타당성조사 결과에 대하여 논한다. 중고 화물선 개조에 의한 $CO_2$ 운송선 확보와 신조에 의한 운송선 확보를 위한 개념 설계를 수행하였고, 이를 토대로 $CO_2$ 운송선의 획득 비용을 추정하였다. 마지막으로 가정한 시나리오에 대한 운용 방안을 검토하여 연간 운송량을 수송할 수 있는 필요 척수와 소요 비용을 함께 추정하였다.

• 대한조선학회논문집
• /
• 제42권1호
• /
• pp.50-56
• /
• 2005

The performance of Traditional Korean Fishing Boat is surveyed based on Report on Investigation of Korean Fishing Boat. The characteristics of Traditional Korean fishing Boat of hull form, rudder, sail are studied from the view point of modern sailing boat design. As a result we find her hull form is an excellent candidate of mother ship for modern boat design and the great sized rudder of Traditional Korean Fishing Boat makes a role of the centerboard of modern sailing host. And also we find the sail of Traditional Korean fishing Boat is more useful for sailing against the wind direction than an ordinary Lug sail.

• Journal of Advanced Marine Engineering and Technology
• /
• 제12권2호
• /
• pp.46-56
• /
• 1988

The author has presented a new approach to design hydrofoil section shapes in consideration of viscous for marine propeller blades. In suction sides of propeller blades, the pressure distribution on hydrofoil sections in non-cavitating flow should be examined before the study of cavitation characteristics. Generally, the calculation results for hydrofoil conformal mapping method by which neglect viscous effects do not agree with experimental ones. Moreover, another papers reported that laminar separation bubble and transition played an important role on the cavitation inception. From these considerations, it is very important to study the viscous effects of the hydrofoil sections, especially the mechanism separation bubble and the apparent thickness of hydrofoil section. Therefore, the new design method of hydrofoil sections in consideration of viscous effects in comparison to the airfoil section should be studied. In designing the new hydrofoil section shapes, based on Eppler theory, the author tried to give the peak negative pressure in leading edge region for NACA airfoil in consideration of viscous effects without turbulent boundary layer separation as much as possible. The design method was verified from the fact that the boundary characteristics was improved and the lifts of new hydrofoils were slightly in creased in comparison to these of NACA 16-012 symmetrical, NACA 4412 non-symmetrical airfoils.