• Journal of Fisheries and Marine Sciences Education
• /
• v.18 no.3
• /
• pp.236-243
• /
• 2006

A series of surveys are performed to evaluate the abundance, composition and distribution of marine debris on the sea bed around the Busan port. In order to set up a master plan for the marine environmental pollution the relevant maritime authority must understand how many and w㏊t kinds of marine litters are distributed on the sea bed. At first we planed to survey areas divided regularly according to the coast line but there were many sea going vessels and fishing boats. So we selected and surveyed the around area where there were no sea going vessels or fishing boats.The obtained results are as follows: 1. The mean values of litters in number and weight are 5.8 pieces/㏊. and 3.5㎏/㏊. respectively. 2. The highest density in terms of number are vinyl and plastic item, and in weight are fishing gear and ship articles. 3. The nearer to the shore we surveyed the more we collected in terms of the density of marine litters in number and in weight per hectare. 4. Eel pot, oiled waste, rope, others, other pot and net of fishing gear litters in number were 59.9, 22.7, 7.9, 4.5, 3.1 and 1.9% respectively. 5. There is no relationship between the amount of fish caught and the amount of marine debris.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.2
• /
• pp.91-97
• /
• 2005

The purpose of this research is malodor reduction of food waste leachate by some microorganism. In oder to observe the efficiency of malodor reduction by different microorganisms, 300ml of food waste leachate was fermented by the addition of 10% precultured seed microorganism such as marine algae of Spirulina plantensis, Chlorella vulgaris, the yeast Saccharomyces cerevisae and bacteria Bacillus cereus for 10 days. During the fermentation the change in pH, salinity and sensory evaluations were tested. As the results, the pH values of samples in the beginning were 3.5~4.0. After fermentation they are increased to the level 4.9~7.4. The salinity values of the samples fermented by Spirulina plantensis and Chlorella vulgaris were lowered rapidly. By the sensory evaluation, the efficiency of malodor reduction by Chlorella vulgaris of the marine microalgae showed almost inodorous degree of ordor 1.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.175-181
• /
• 2011

The purpose of this study is to secure the design data for the optimization of the radial turbine and heat cycle system, by using the CFD analysis technique and the design of 100kW class radial turbine applicable to waste heat recovery generation system for ship. Radial turbine was comprised of scroll casing, vane nozzle with 18 blades and rotor with 13 blades, and analysis grid was used to about 2.3 million. Mass flow rate and rotational speed was 0.5kg/s, 75,0000rpm, respectively. Eight kinds of inlet pressure was set between 195 and 620kPa. As the flow accelerated through the nozzle passage to the throat, the pressure level at the pressure and suction sides becomed similar to about Mach number of 0.35. When the inlet temperature and pressure was $250^{\circ}C$, 352kPa respectively, the isentropic efficiency and mechanical power showed the analysis results of 74% and 108kW.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.1
• /
• pp.55-59
• /
• 2009

As one of the methods for recycling the FRP from the small and medium waste ships, separation of roving layer from the mat has some merits in a sense of the recycling energy and the environmental effects. Similar characteristics, however, between the roving and the mat even with different ratio of the resin and the glass and the thickness of the roving, much thinner than the mat, make the mechanically automatic differentiation difficult. In this study spectrochemical differentiation between the two layers has been made using (1) boiling concentrated sulfuric acid which can dissolve the resin in the FRP layer, (2) methanol and isopropanol solution saturated with KOH which can dissolve the glass, or (3) hydrogen fluoride(HF) solution which can reacts with $SiO_2$ fragments of the glass. Furthermore coloring water-soluble dye following the HF treatment makes the roving layer more distinguishable photo-physically.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.3
• /
• pp.181-186
• /
• 2007

Despite of environmental problems(safety hazards), mechanical recycling of FRP boats, which involves shredding and grinding of the scrap FRP in a new product. is one of the simpler and more technically proven methods than incineration or reclamation ones. Because FRP is made up of reinforced fiber glass, it is very difficult to break into pieces. It also occurs secondary problem such as air pollution and unacceptable shredding noise level. The another urgent problem which is a serious barrier to FRP recycling is very limited reusable applications. This study is to propose a new method which is efficient and environment friendly waste FRP regenerating system. And it also have shown the polymer cement and fiber-reinforced concrete applications with the waste FRP.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.1
• /
• pp.46-51
• /
• 2014

Increasing of waste FRP (fiber reinforced plastics) has caused environmental problems. Recently, the technology of making fibers from waste FRP, which can be used to reinforce the concrete, was developed and the reinforced concretes were tested to study the structural performance. The purpose of this study is to investigate the effect of the powder, obtained together with F-fiber from the waste FRP, on the compressive strength and the fire resistance performance as in the high strength concrete. Strength tests show that the use of recycled FRP powder does not reduce the compressive strength of high strength concrete if the volume fraction of FRP powder is less than 0.7%. Electric furnace test results also show that the use of recycled FRP powder may increase the fire resistance performance of high strength concrete significantly.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.449-454
• /
• 2003

Bans on TBT based antifouling paints have been drafted since 1998 by meetings 42, 43, 45 and 46 for the MEPC(Marine Environmental Protection Committee) of the international Maritime Organization, and decided finally at a Diplomatic Conference of the IMO in October 2001. It was a key issue that there should be a global prohibition on the presence of organo-tin compounds in ships by 1 Jan. 2008. TBT Paint Wastes from ship have been produced by vast quantity since 2003. This paper suggests a method to design Treatment System for TBT Paint Waste from Ship. The organotion compound was dissolved by heating, and the organic matters was oxidized and turned into inorganotins, then they were stabilized in the end. At 500^{\circ}C$, the organotin compound which heated for one hour was removed by 58%, and in 1000^{\circ}C$ the organotin compound was treated by 99.9% after and hour of heating treatment.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.590-599
• /
• 2011

The electrification of the waste heat of fuel cell is necessary to enhance the efficiency of fuel cell system. For this purpose, the SOFC/ST(Solid oxide fuel cell/Steam turbine) hybrid system is suitable. The purpose of this work is to predict the performance of methane fueled SOFC/ST hybrid power system and to analyze the influence of operating temperature of stack, current density of stack, combustor outlet gas temperature, and boiler outlet gas temperature. According to the analysis, it is proved that making the best use of the waste heat of stack and minimizing the fuel consumption of combustor are essential for the high-efficiency of SOFC/ST hybrid system.

• Journal of Fisheries and Marine Sciences Education
• /
• v.20 no.1
• /
• pp.90-94
• /
• 2008

Growth and water quality in Japanese eel, Anguilla japonica ($6.0{\pm}0.9g$) fed extruded and paste type diets were compared for 8 weeks. Fish in the duplicate tanks were fed with one of three experimental diets: two different extruded pellet diets and one paste type diet. Six FRP tanks were used with stocking density of 3.6 kg per tank (3 m3). Restricted feeds (ca. 2% of body weight) were served twice daily. Weight gains were checked at the end of every two-week interval, and water qualities in terms of NH4-N and NO2-N were determined daily one hour after feeding in the morning. Water temperature, dissolved oxygen, and pH were constantly kept within the optimum range, while fifty percent of total water volume was changed daily. Eels fed the extruded pellet diets showed significantly better (P<0.05) growth performance than did eels fed the paste type diet. The amount of feed waste from the paste type diet was significantly greater than those from the extruded pellet diets (P<0.05). Ammonia (NH4-N) waste was significantly higher from the paste diet than from the extruded pellet diets (P<0.05). These results show that extruded pellet diets are better than the paste type diet for growth and water quality management in eel culture.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.3
• /
• pp.45-53
• /
• 2003

Discharging untreated bilge to the ocean is a cause of marine pollution. In general, bilge water contains free and/or emulsified forms of oil. Free form of oil can easily be separated by gravimetric flotation and/or proper filtration processes. However, those simple physicochemical processes could not separate emulsified oil without adding proper chemicals. Electrolytic flotation is one of promising technologies able to fulfill the effluent standard requirement, which is below 15 ppm of oil content. In this research, Electrochemical process consisting of electrochemical flotation basin was studied for the treatment of emulsified oil. In order to estimate, the effectiveness of oil separation equipment influent concentration of oil and HRT(Hydraulic retention time) were considered. Also, lab-scale electrochemical process was designed and operated in the condition of various HRT, current density, and electrode gap. Through the research, following results were obtained. From the experiment of bench scale electrochemical treatment process, it was demonstrated that the emulsified oil was treated effectively and the removal efficiency of emulsified oil from wastewater was increased with HRT and current density.