DOI QR코드

DOI QR Code

Compressive Strength and Fire Resistance Performance of High Strength Concrete with Recycled Fiber Power from Fiber-Reinforced Plastics

재활용 FRP 미분말을 혼입한 고강도 콘크리트의 압축강도 및 내화성능

  • Lee, Seung Hee (Department Bio. & Chemical Engineering, Hong-Ik University) ;
  • Park, Jong Won (Department Architectural Engineering, Hong-Ik University) ;
  • Yoon, Koo Young (Department Mechano-Informatics Engineering, Hong-Ik University)
  • 이승희 (홍익대학교 과학기술대학 바이오화학공학과) ;
  • 박종원 (홍익대학교 과학기술대학 건축공학과) ;
  • 윤구영 (홍익대학교 과학기술대학 기계정보공학과)
  • Received : 2014.01.27
  • Accepted : 2014.02.17
  • Published : 2014.02.25

Abstract

Increasing of waste FRP (fiber reinforced plastics) has caused environmental problems. Recently, the technology of making fibers from waste FRP, which can be used to reinforce the concrete, was developed and the reinforced concretes were tested to study the structural performance. The purpose of this study is to investigate the effect of the powder, obtained together with F-fiber from the waste FRP, on the compressive strength and the fire resistance performance as in the high strength concrete. Strength tests show that the use of recycled FRP powder does not reduce the compressive strength of high strength concrete if the volume fraction of FRP powder is less than 0.7%. Electric furnace test results also show that the use of recycled FRP powder may increase the fire resistance performance of high strength concrete significantly.

폐 FRP 양의 증가는 환경적 문제를 일으키고 있다. 최근 폐 FRP로부터 콘크리트를 보강시킬 수 있는 섬유를 만들 수 있는 기술이 개발되었으며, 재활용 섬유로 강화된 콘크리트 제품의 구조적 성능을 연구하기 위한 시험도 수행되었다. 본 연구의 목적은 폐 FRP에서 생성되는 재활용 섬유 분진이 고강도 콘크리트의 압축강도와 내화성능에 주는 영향을 연구하는 것이다. 실험적 강도 측정 결과 재활용 섬유 분진의 부피 분율이 0.7%보다 작으면 그 분진을 사용하더라도 고강도 콘크리트의 압축강도가 감소하지 않았다. 전기로 시험 결과 역시 재활용 섬유 분진의 사용으로 고강도 콘크리트의 내화성이 크게 향상될 수 있음을 보였다.

Keywords

References

  1. Bentz, D., 2000, "Fibers, Percolation and Spalling of High Performance Concrete", ACI material Journal, 351-359.
  2. Han, C.K., Yang, S.H., Lee, B.R. and Hwang, I.S., 1999, "A Study on the Spalling Properties of High-Performance Concrete with the Kinds of Aggregate and Polypropylene Fiber Contents", J. Lor. Concrete Ins., 53, 69-77.
  3. Kalifa, P., 2001, "High-Temperature behaviour of HPC with Polypropylene Fibers from Spalling to Microstructures", Cement and Concrete Research, 1487-1499.
  4. Kang, B.H., 2002, "Properties of High-heated Concrete", Journal of the Korea Concrete Institute. 14(2), 17-23.
  5. Kim, Y.S., Jung, C.H. and Kim, P.H., 2001, "Development of Effective Combustion Control Technique of Thermoplastic Materials", Research Report of KIOST.
  6. Kim, Y., Yoon, K.Y. and Lee, S.H., 2010, "Application Study of the reinforcing fiber produced from waste FRP on the High Strength Concrete", Industrial Technique Final Report for Ministry of Environment.
  7. Lee, S.H. and Yoon, K.Y., 2012, "Developing Advanced Total Recycling Method of FRP Boats", J. Kor. Soc. Mar. Env. & Ener., 16(1), 53-59. https://doi.org/10.7846/JKOSMEE.2013.16.1.53
  8. Min. Oceans & Fisheries, 2003, Annual Report of Fisheries Trend.
  9. NISTIR 5934, 1996, "Fire Performance of High-Strength Concrete: A Report of the State-of-the-Art", NIST, Dec.
  10. Park, J.W. and Paek, J.H., 2009, "Mechanical Properties of High Strength Concrete Reinforced with Recycled Fibres from Fiber- Reinforced Plastics", J. Arch. Inst. Kor., 25(8), 127-134.
  11. Park, J.W. and Paek, J.H., 2010, "Structural Performance of Reinforced Concrete Members Strengthened with Recycled Fibres from Fiber-Reinforced Plastics", J. Arch. Inst. Kor., 26(7), 37-44.
  12. Park, J.W. and Paek, J.H., 2011, "Seismic Performance of Reinforced Concrete Beam-to-Column Joints Strengthened with Recycled Fibres from Fiber-Reinforced Plastics", J. Kor. Soc. Hazard Mitigation, 11(6), 25-30.
  13. Sarvaranta, L. and Mikkola E., 1994, "Fiber Mortar Composites in Fire Conditions", Fire Mater Vol. 18, 45-50. https://doi.org/10.1002/fam.810180106
  14. Seon, D.W. et al. 1995, "Bench-scale Fluidized-bed Plastic Waste Pyrolysis", J. Kor. Soc. Waste management,, 12(1), 120-130.
  15. Song, H., Hyung, W.K., Do, J.Y. and So, Y.S., 2004, "Explosive Spalling Dependent on Compressive Strength Concrete including Silica Fume", Journal of Architectural Institute of Korea, 20(9), 111-117.
  16. Yoo, S.H., 2009, "Spalling Reduction Method of High Strength Reinforced Concrete Columns Using Fibers", J. Kor. Ass. Fire Ser. Pol., 23(4), 1-6.

Cited by

  1. Development of FRP Recycling Process for Regenerating Applications of Fire Resistance Performance of High Strength Concrete vol.18, pp.3, 2015, https://doi.org/10.7846/JKOSMEE.2015.18.3.207