• 전기학회논문지
• /
• 제67권11호
• /
• pp.1415-1422
• /
• 2018

In Korea, prior to 2011, the electric reserve margin followed the probabilistic reliability view and the planning reserve margin had been operated at about 15% based on the assumption that power outage was permitted within 0.5 days a year. However, after experiencing the shortage of the electric generation capacity in Sept. 15, 2011, the planning reserve margin was selected as 22% to improve the reliability of the electric supply. In this paper, using panel data of 28 OECD countries over the period 2000-2014 we attempted to empirically examine the linkage between reserve margin, electricity tariffs, renewable energy share, GDP per capita, and summer / winter peak-to-peak ratios. As a result, all four independent variables have been significant for the electric reserve margin, and in particular, we found that countries with similar peaks in winter and summer have operated 4.3% higher reserve margin than countries experiencing only summer peak.

• 응용통계연구
• /
• 제16권2호
• /
• pp.261-271
• /
• 2003

서포트 벡터 기계(Support Vector Machines, SVMs)에서의 일반화 오차의 경계는 훈련점들과 분리 초평면 사이의 최소의 거리에 의존한다. 특히, 소프트 마진 알고리즘은 목표 마진과 slack 벡터의 놈들에 의하여 경계가 결정된다. 이 논문에서는, 자료들에 있어서 잡음들에 의한 오염들을 직접적으로 고려하는 새로운 소프트 마진 알고리즘을 공식화하였다. 그리고, 수치적 예제를 통하여, 제안된 방법과 기존의 소프트 마진 알고리즘을 비교하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.184-198
• /
• 2020

Decisions of the design speed, MCR, and engine capacity have been empirically made by assuming the value termed the sea margin. Due to ambiguity regarding the effect of some factors on the sea margin, the value has been commonly decided based on experience. To evaluate the value from a new viewpoint, it is necessary to construct an approach to estimate the sea margin through an objective procedure based on a physical and mathematical model. In this paper, a framework to estimate the actual sea margin of an LNGC based on the maneuvering equations of motion is suggested by considering the hull, propeller, rudder, and given sea route under wind and waves. The fouling effect is additionally quantified as the increase of total resistance by considering the re-docking period. The operation data is reviewed to amend the increase of the total resistance considering the speed loss of a ship. Finally, the factor of how much the resistance increases due to fouling is newly obtained for the vessel. Based on the comparison of the estimated sea margin with the empirical range of the sea margin, the constructed framework is regarded as feasible.

• Journal of Korean Neurosurgical Society
• /
• 제50권1호
• /
• pp.30-35
• /
• 2011

Objective : Morphometric data for the sympathetic ganglia (SG) of the upper thoracic spine was investigated to identify the exact location of the SG in order to reduce normal tissue injury in the thoracic cavity during thoracoscopic sympathectomy. Methods : In 46 specimens from 23 formalin-fixed adult cadavers, the authors measured the shortest distance from the medial margin of the T1, T2 and T3 SG to the most prominent point and medial margin of the corresponding rib heads, and to the lateral margin of the longus colli muscle. In addition, the distance between the most prominent point of the rib head and the lateral margin of longus colli muscle and the width of each SG were measured. Results : The shortest distance from the medial margin of the SG to the prominent point of corresponding rib head was on average 1.9 mm on T1, 4.2 mm, and 4.1 mm on T2, T3. The distance from the medial margin of the SG to the medial margin of the corresponding rib head was 4.2 mm on T1, 5.9 mm, and 6.3 mm on T2, T3. The mean distance from the medial margin of the SG to the lateral margin of the longus colli muscle was 6.7 mm on T1, 8.8 mm, 9.9 and mm on T2, T3. The mean distance between the prominent point of the rib head and the lateral margin of the longus colli muscle was 4.8 mm on T1, 4.6 mm, and 5.9 mm on T2, T3. The mean width of SG was 6.1 mm on T1, 4.1 mm, and 3.1 mm on T2, T3. Conclusion : We present morphometric data to assist in surgical planning and the localization of the upper thoracic SG during thoracoscopic sympathectomy.

• Journal of Periodontal and Implant Science
• /
• 제51권3호
• /
• pp.189-198
• /
• 2021

Purpose: This study was conducted to determine how the distance of the near insertion points in a vertical mattress suture from the wound margin influences the pattern of primary closure in an in vitro experimental model. Methods: Pairs of 180 porcine gingival and alveolar mucosa samples were harvested from 90 pig jaws and fixed to a specially designed model. A vertical mattress suture was performed with the near insertion point at 3 different distances from the wound margin (1-, 3-, and 5-mm) on both the gingival and mucosal samples (6 groups; n=30 for each group). The margin discrepancy and the presence of epithelium between the wound margins were measured on histologic slides. Results: The margin discrepancy decreased significantly as the near insertion point became closer to the wound margin both in mucosal tissue (0.241±0.169 mm, 0.945±0.497 mm, and 1.306±0.773 mm for the 1-, 3-, and 5-mm groups, respectively) and in gingival tissue (0.373±0.304 mm, 0.698±0.431 mm, and 0.713±0.691 mm, respectively). The frequency of complications of wound margin adaptation reduced as the distance of the near insertion point from the wound margin decreased both in the mucosal and gingival tissues. Conclusions: Placing the near insertion point close to the wound margin enhances the precision of wound margin approximation/adaptation using a vertical mattress suture.

• 노동경제논집
• /
• 제39권2호
• /
• pp.35-51
• /
• 2016

2000~2008년 한국노동패널 자료를 이용한 미시 노동공급 탄력성 추정치는 0.23으로 나타났다. 분석대상 기간 중의 주5일 근무제 확대나 개별 가구의 소득 및 자산을 포함할 경우에도 추정치는 강건성을 보인다. 근로자들의 노동시장 참여 여부를 포함한 거시 노동공급 탄력성 추정치는 미시 노동공급 탄력성 추정치보다는 큰 값을 갖지만, 통상적인 유의수준에서 통계적으로 유의하지는 않았다.

• 대한치과기공학회지
• /
• 제32권1호
• /
• pp.17-21
• /
• 2010

This experimental study was to determine the fitness in each cervical margin of reusing porcelain gold alloy. The gold alloy used in this experimental study was a Au-Pt-Pd alloy (BDCG-898, Bukwang Inc, Korea) for the fabrication of porcelain fused to metal crown. Twenty-five copings were divided into the five groups. And the group A, B, C, D and E were cording successively according to the frequency of reuse to five times. Each specimen was reused without adding new metal. The experimental results were as follows: 1. The group A, B, C showed good fitness in each cervical margin. 2. The group D got good fitness in labio and linguo cervical margin, but the mesio and disto cervical margin showed more than $40{\mu}m$ 3. The group E showed worse fitness than the other groups in each cervical margin.

• 한국유체기계학회 논문집
• /
• 제11권2호
• /
• pp.38-45
• /
• 2008

This study presents a numerical procedure to optimize the compressor design to increase the surge margin of compressor with response surface method (RSM). The Box-Behnken design method is used to reduce the number of calculation for fitting the second-order response surface. In order to consider the increase of surge margin during numerical optimization without any calculation at the surge point, the slope of compressor characteristic curve at the design point is suggested as an objective function in the present optimization problem. Mean line performance analysis method is used to get the design and off-design characteristic curves of centrifugal compressor. The impeller exit angle, impeller exit height and impeller radius are chosen as design variables. The optimum shapes show the increase of surge margin for the surge margin optimization and increase of efficiency for the efficiency optimization in comparison with an initial shape.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.151-152
• /
• 2018

In the domestic nuclear power industry, concern about safety of nuclear power plants is continuously increased with the Fukushima nuclear power plant accident. In order to enhance the safety of nuclear power plants, it is important to ensure that the power plants are operating with proper margin within the original design bases. Margin management is the process of ensuring that the NPP designer and operator are aware of the physical and operating limits, and potential and probability of failure, for each component in the plant. All components are subject to margin considerations, but the most important components by scope and attention are those related to safety-related systems and NPP safe shutdown.

• 수산경영론집
• /
• 제35권1호
• /
• pp.169-191
• /
• 2004

This Study attempts to analysis the degrees of the efficiency of fisheries marketing channel's effectiveness, which are traditional marketing channel's effectiveness of fisheries wholesale markets and Discount Store's effectiveness such as margin, marketing performance. The study methodologies include not only a field sample survey but also a field interview. The results of this study are summarized as follows. First, at the numbers of fisheries marketing channel's margin factors, traditional marketing channel's margin factors are more than discount store's margin factors. Secondly, at the comparative study result of marketing channel margin efficiency, traditional marketing channel's prices are similar to discount store's prices. That is, consumers have bought similar retail price's seafood products through traditional marketing channels as well as discount stores cannels. Finally, however most consumers prefer discount stores to traditional retail stores because of discount store's multi-functions such as assortment of goods, freshness, exchange, refund and employee's kindness. In conclusion, the most important factor of fisheries marketing management is to realize the appropriate balance between marketing margin and consumer satisfaction.