• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.3
• /
• pp.169-175
• /
• 2022

Korea's construction industry has a shortage and aging of construction manpower, low productivity compared to other industries, and a high rate of industrial accidents. The Ministry of Land, Infrastructure and Transport is preparing for the 4th industrial revolution and is expanding investment in construction automation and innovative growth engines to improve productivity in the construction industry. In order for new technologies to be utilized in the road construction field, the accuracy of the technologies and the applicability of each type of work must be evaluated. In this study, the accuracy of the mobile mapping system was tried to verify based on the relevant work regulations, and to suggest the applicability of the mobile mapping system to high-speed driving tracks through data acquisition and analysis on road construction sites. The accuracy of the equipment used in the study was verified in accordance with the relevant work regulations, and the possibility of applying the mobile mapping system used for the study to road construction surveying was presented with a maximum error of less than 10cm in the horizontal and vertical directions. In addition, the possibility of utilizing the road construction survey using the mobile mapping system was presented through comparison with the existing method for data acquisition time for construction surveying, production of construction status survey results, and calculation of heatmap and earthworks. In the future, the use of construction status surveying of the mobile mapping system will greatly improve the efficiency of construction work.

• Human Ecology Research
• /
• v.55 no.6
• /
• pp.649-659
• /
• 2017

This study investigated the effect of a child care center directors' work stress and awareness of their servant leadership on burnout. The subjects of this study were 200 child care center directors in Incheon. They responded to 'Work Stress Scale', 'Maslach Burnout Inventory (MBI)', 'Servant Leadership Scale'. There were five subscales of Servant Leadership Scale (altruistic calling, emotional healing, wisdom, persuasive mapping, and organizational stewardship). Data were analyzed by frequency, percentage, mean, standard deviation, Pearson's correlation and hierarchical regression. Moderating effects were examined using analysis procedures of Baron and Kenny. The major results were as follows. First, child care center directors' burnout and work stress were positively correlated. Child care center directors' burnout and awareness of their servant leadership (emotional healing, wisdom, persuasive mapping, and organizational stewardship) was negatively correlated. Second, child care center directors' work stress, emotional healing, persuasive mapping and organizational stewardship affected their burnout. This means that the work stress of child care center directors increases their burnout. However, the child care center director's servant leadership is a factor in reducing burnout. Third, child care center directors' work stress and organizational stewardship had an interaction effect on burnout. The results suggests that child care center directors' organizational stewardship needs to be considered as an important factor for decreasing their own burnout. We also discussed implications and suggestions for future research and policy makers.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.167-173
• /
• 2011

Most of the terminologies used in medical domain is not intended to be applied directly in clinical setting but is developed to integrate the terms by defining the reference terminology or concept relations between the terms. Therefore, it is needed to develop the subsets of the terminology which classify categories properly for the purpose of use and extract and organize terms with high utility based on the classified categories in order to utilize the clinical terms conveniently as well as efficiently. Moreover, it is also necessary to develop and upgrade the terminology constantly to meet user's new demand by changing or correcting the system. This study has developed a mapping tool that allows accurate expression and interpretation of clinical terms used for medical records in electronic medical records system and can furthermore secure semantic interoperability among the terms used in the medical information model and generate common terms as well. The system is designed to execute both 1:1 and N:M mapping between the concepts of terms at a time and search for and compare various terms at a time, too. Also, in order to enhance work consistency and work reliability between the task performers, it allows work in parallel and the observation of work processes. Since it is developed with Java, it adds new terms in the form of plug-in to be used. It also reinforce database access security with Remote Method Invocation (RMI). This research still has tasks to be done such as complementing and refining and also establishing management procedures for registered data. However, it will be effectively used to reduce the time and expenses to generate terms in each of the medical institutions and improve the quality of medicine by providing consistent concepts and representative terms for the terminologies used for medical records and inducing proper selection of the terms according to their meaning.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.10
• /
• pp.208-217
• /
• 2003

In order to construct the extrusion die surface of T -shaped sections, an automatic surface construction method based on NURBS surface and area mapping method is proposed in the present work. In the present study, a center point for area mapping is determined by introducing the mapping concept based on constant area proportionality between original billet and final product. The characteristic points of inlet profile are determined using the traditional area mapping method and the root finding numerical method. The inlet and outlet profiles are precisely described with NURBS curves using the characteristic points of entry and exit sections. For the construction of NURBS surface, an interpolation method for the pre-determined two section curves has been developed to be used in the generation of interior control points and weights. To show the validity of the proposed method, automatic die surface generation is carried out for the T-shaped section and T-shaped section with rounded corners.

• Transactions of Materials Processing
• /
• v.12 no.4
• /
• pp.348-357
• /
• 2003

In order to construct the extrusion die surface of arbitrarily shaped sections, an automatic surface construction method based on NURBS surface and area mapping method is proposed in the present work. A center point fur area mapping is determined by introducing the mapping concept based on constant area proportionality between original billet and final product. The characteristic points of inlet profile are determined using the traditional area mapping method and the root finding numerical method. The inlet and outlet profiles are precisely described with NURBS curves using the characteristic points of entry and exit sections. For the construction of NURBS surface, an interpolation method for the pre-determined two section curves has been developed to be used in the generation of interior control points and weights. To show the validity of the proposed method, automatic die surface generation is carried out for the several kinds of shaped sections.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.4
• /
• pp.92-97
• /
• 2015

The purpose of this work is to support a solution of optimizing TMO (tone mapping operator). JPEG XT Profile A and C utilize Erik Reinhard TMO that works well in most cases, however, detailed information of a scene is lost in some cases. Reinhard TMO only calculates its coefficient to have tone-mapping curve from log-average luminance, and this lead to lose details of bright and dark area of scenes in turn. Thus, this paper proposes an enhancement of the default TMO for JPEG XT Profile C to optimize tone-mapping curve. Main idea is that we divide tone mapping curve into several ranges, and set reasonable parameters for each range. By the experimental results, the proposed scheme shows and obtains better performance within a dark scene, compared to the default Reinhard TMO.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.816-820
• /
• 2009

In landscape simulatin, it is necessary to express very realistic image generated by computer graphics. One solution is to use texture mapping; however, it needs a lot of work and time to obtain images for texture mapping since there are huge variety of images for buildings, roads, stations and so on, and the landscape image is diverse due to the weather and time. Especially, weathered images such as stain on walls, crack on roads and so forth, are needed to make the landscape image very realistic. These weathered images do not have to be strict so that it saves a lot of work and time for obtaining the images for texture mapping if we can generate a variety of weathered images automatically. Therefore, this paper describes how to generate a variety of weathered images automatically by changing the weathered shape of the original image.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.999-1002
• /
• 2002

Cylindrical Cam Mechanism is widely used in the fields of industries, such as machine tool exchangers, textile machinery. This paper proposes a method for manufacturing of cylindrical cam in Multi CNC machining center. Multi CNC machining center has two different types depending on the tilting axis. For the manufacturing procedures. in this paper the location and the orientation of cutter path are defined from shape design data of cam. The integral NC code fur the both types of multi-axis CNC machining center can be created using the coordinates mapping between design coordinates and work coordinates. Finally, CAD/CAM program is developed on $C^{＋＋}$ language. This program can display manufacturing and kinematics simulation, which can make integral NC code for multi-axis CNC machining center of two types.

• Bulletin of the Korean Mathematical Society
• /
• v.58 no.6
• /
• pp.1355-1375
• /
• 2021

The n-dimensional generalized Hartogs triangles ℍⁿ_𝐩 with n ≥ 2 and 𝐩 := (p₁, …, p_n) ∈ (ℝ⁺)ⁿ are the domains defined by ℍⁿ_𝐩 := {z = (z₁, …, z_n) ∈ ℂⁿ : |z₁|^p₁ < ⋯ < |z_n|^p_n < 1}. In this paper, we study the L^p Sobolev mapping properties for the Bergman projections on the n-dimensional generalized Hartogs triangles ℍⁿ_𝐩, which can be viewed as a continuation of the work by S. Zhang in [25] and a higher-dimensional generalization of the work by L. D. Edholm and J. D. McNeal in [16].

• Journal of Korean Academy of Nursing
• /
• v.53 no.5
• /
• pp.497-499
• /
• 2023