• Nuclear Engineering and Technology
• /
• v.19 no.4
• /
• pp.266-278
• /
• 1987

This paper addresses the issues in setting performance criteria for safety regulation of nuclear power plants. Since setting criteria at the low level is a much more difficult task than it is at the top level, the low-level performance criteria should be derived consistently from the more easily determinable top-level performance criteria. The paper also proposes several approaches to characterizing uncertainties in performance criteria, by extending the reliability allocation methodology that is based on the mean-to-mean mapping to a stochastic multi-objective optimization problem where the state variables are uncertain.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.237-244
• /
• 2020

This paper describes an implement of Simultaneous Localization and Mapping(SLAM) in two dimensional space. The method uses Invariant Extended Kalman Filter(IEKF), which transforms the state variables and measurement variables so that the transformed variables constitute a linear space when variables called the invariant quantities are kept constant. Therefore, the IEKF guarantees convergence provided in the invariant quantities are kept constant. The proposed IEKF approach uses Lie group matrix for the transformation. The method is tested through simulation, and the results show that the Kalman gain is constant as it is the case for the linear Kalman filter. The coherence between the estimated locations of the vehicle and the detected objects verifies the estimation performance of the method.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.7
• /
• pp.279-291
• /
• 2020

This study aims to develop the concept of innovation models with the marketing channel construct approach, marketing innovation, product segmentation, and customer insight; as well as improvements to the theory of resource-based combined with the method of service-dominant logic. This study approach is based on quantitative descriptive conducted with three stages of testing scenarios. The first test is the mapping of the innovation model construct through testing the validity and reliability with the moderation of customer orientation variables. The second scenario examines the relationship of influence between the independent variables on the dependent variable of 29 hypothetical analysis equation modeling. The unit of analysis was conducted on 497 SMEs involved in the food and beverage sectors, with the criteria being SMEs must have a rating of 4-5 points on the Go-Food applications software. The results shown that: 1) the construct used to develop an innovative model both directly and via moderation is positive and significant; 2) Through a complicated relationship that involves all components of the variable, it outlines a positive and significant effect except for the path of analysis (μ5). The theoretical and managerial implications state that the service-dominant logic approach and resource-based view theory have extreme reliability and interrelations.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.78-87
• /
• 1996

In this paper, a remeshing criterion has been suggested in order to order to automate the remeshing decision during finite element analysis of metal forming. In order to use for the remeshing decision, two of remeshing criteria have been investigated. One is the use of error estimates based on errors in stresses and strain rate of the finite element solution and the other is the use of geometric characterisreics of distorted elements. As a result, the strain rate error estimate in power norm based on the former is found to give more valuable information about remeshing decision than the ones based on the latter. Examples are given to demon- strate the usefulness of the suggested eroor estimate as a remeshing criterion.

• Journal of Powder Materials
• /
• v.30 no.1
• /
• pp.29-34
• /
• 2023

A fixed-point iteration is proposed to integrate the stress and state variables in the incremental analysis of plastic deformation. The Conventional Newton-Raphson method requires a second-order derivative of the yield function to generate a complicated code, and the convergence cannot be guaranteed beforehand. The proposed fixed-point iteration does not require a second-order derivative of the yield function, and convergence is ensured for a given strain increment. The fixed-point iteration is easier to implement, and the computational time is shortened compared with the Newton-Raphson method. The plane-stress condition is considered for the biaxial loading conditions to confirm the convergence of the fixed-point iteration. 3-dimensional tensile specimen is considered to compare the computational times in the ABAQUS/explicit finite element analysis.

• Water Engineering Research
• /
• v.6 no.2
• /
• pp.39-48
• /
• 2005

The Brazos River is one of the longest rivers contained entirely in the state of Texas, flowing over 700 miles from northwest Texas to the Gulf of Mexico. Today, the Brazos River Authority and Texas Commission on Environmental Quality interest in drought protection plan, waterpower project, and allowing the appropriation of water system-wide and water right within the Brazos River Basin to meet water needs of customers like farmers and local civilians in the future. Especially, this purpose of this paper primarily intended to provide the data for the engineering guidelines and make easily geological mapping tool. In the Brazos River basin, many stream-flow gage station sites are not working, and they can not provide stream-flow data sets enough for development of the Probable Maximum Flood (PMF) for use in the evaluation of proposed and existing dams and other impounding structures. Integrated GIS-Spatial Interpolation (GIS-SI) tool are composed of two parts; (1) extended GIS technique (new making interface for hydrological regionalization parameters plus classical GIS mapping skills), (2) Spatial Interpolation technique using weighting factors from kriging method. They are obtained from the relationship among location and elevation of geological watershed and existing stream-flow datasets. GIS-SI technique is easily used to compute parameters which get drainage areas, mean daily/monthly/annual precipitation, and weighted values. Also, they are independent variables of multiple linear regressions for simulation at un gaged stream-flow sites. In this study, GIS-SI technique is applied to the Brazos river basin in Texas. By assuming the ungaged flow at the sites of Palo Pinto, Bryan and Needville, the simulated daily/monthly/annual time series are compared with observed time series. The simulated daily/monthly/annual time series are highly correlated with and well fitted to the observed times series.

• Wind and Structures
• /
• v.16 no.5
• /
• pp.433-455
• /
• 2013

A phase delay spectrum model towards the representation of spatial coherence of stochastic wind fields is proposed. Different from the classical coherence functions used in the spectral representation methods, the model is derived from the comprehensive description of coherence of fluctuating wind speeds and from the thorough analysis of physical accounts of random factors affecting phase delay, building up a consistent mapping between the simulated fluctuating wind speeds and the basic random variables. It thus includes complete probabilistic information of spatial stochastic wind fields. This treatment prompts a ready and succinct scheme for the simulation of fluctuating wind speeds, and provides a new perspective to the accurate assessment of dynamic reliability of wind-induced structures. Numerical investigations and comparative studies indicate that the developed model is of rationality and of applicability which matches well with the measured data at spatial points of wind fields, whereby the phase spectra at defined datum mark and objective point are feasibly obtained using the numerical scheme associated with the starting-time of phase evolution. In conjunction with the stochastic Fourier amplitude spectrum that we developed previously, the time history of fluctuating wind speeds at any spatial points of wind fields can be readily simulated.

• Asian Journal of Atmospheric Environment
• /
• v.12 no.3
• /
• pp.232-243
• /
• 2018

The construction, development and maintenance of an economically, environmentally and socially sustainable campus involves the integration of measuring tools and technical information that invites and encourages the community to know the actual state to generate positive actions for reducing the negative impacts over the local environment. At the Universidad Nacional de Colombia - Campus $Bogot{\acute{a}}$, a public area with daily traffic of more than 25000 people, the Environmental Management Bureau has committed with the monitoring of the noise pollution and air quality, as support to the campaigns aiming to reduce the pollutant emissions associated to the student's activities and campus operation. The target of this study is based in the implementation of mobile air quality and sonometry monitoring equipment, the mapping of the actual air quality and noise pollution inside the university campus as a novel methodology for a sub-area inside a megacity. This results and mapping are proposed as planning tool for the institution administrative sections. A mobile Kunak$^{(R)}$ Air & OPC air monitoring station with the capability to measure particulate matter $PM_{10}$, $PM_{2.5}$, Ozone ($O_3$), Sulfur Oxide ($SO_2$), Carbon Monoxide (CO) and Nitrogen Oxide ($NO_2$) as well as Temperature, Relative Humidity and Latitude and Longitude coordinates for the data georeferenciation; and a sonometer Cirrus$^{(R)}$ 162B Class 2 were used to perform the measurements. The measurements took place in conditions of academic activity and without it, with the aim of identify the impacts generated by the campus operation. Using the free code geographical information software QGIS$^{(R)}$ 2.18, the maps of each variable measured were developed, and the impacts generated by the operation of the campus were identified qualitative and quantitively. For the measured variables, an increase of around 21% for the $L_{Aeq}$ noise level and around 80% to 90% for air pollution were detected during the operation period.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.5
• /
• pp.423-429
• /
• 2016

A study was conducted to analyze the oil spill dynamic state using system dynamics method, and to developed regional risk program based on oil spill history for better judgement of the situation at the early stage of oil spill. Results were obtained as follows: Firstly, various variables were calculated by a score based on raw data of oil spill history in Korea. Regional oil spill risk was also calculated in a quantitative way. Secondly, calculated regional oil spill risk was analyzed and programmed with a help of smart-device for better use. Thirdly, comparison of oil spill risk between regions became possible and regional oil spill risk program proved to be useful in prompt decision under urgent situation in response to oil spill at sea. Convenient and quick oil spill risk without special restrictions have been able to determine. and it can help in anticipative preparation (strategy) for oil spills.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.961-970
• /
• 2009

Over the last decade, interactive devices such as mobile phones have become complicated drastically mainly because of feature creep, the tendency for the number of features in a product to rise with each release of the product. One of the ways to reduce the complexity of a multi-functional device is to design it consistently. Although the definition of consistency is elusive and it is sometimes beneficial to be inconsistent, in general, consistently designed systems are easier to learn, easier to remember, and causing less errors. In practice, however, it is often not easy to design the user interaction or interface of a multi-functional device consistently. Since the interaction design of a multi-functional device should deal with a large number of design variables and relations among them, solving this problem might be very time-consuming and error-prone. Therefore, there is a strong need for a well-developed methodology that supports the complex design process. This study has developed an effective and efficient methodology, called CUID (Consistent Design of User Interaction), which focuses on logical consistency rather than physical or visual consistency. CUID deals with three main problems in interaction design: procedure design for each task, decisions of available operations(or functions) for each system state, and the mapping of available operations(functions) and interface controls. It includes a process for interaction design and a software tool for supporting the process. This paper also demonstrates how CUID supports the consistent design of user interaction by presenting a case study. It shows that the logical inconsistencies of a multi-functional device can be resolved by using the CUID methodology.