• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권8호
• /
• pp.3701-3727
• /
• 2016

Recently Service Function Chaining (SFC) is promising to innovate the network service mode in modern networks. However, a feasible implementation of SFC is still difficult due to the need to achieve functional equivalence with traditional modes without sacrificing performance or increasing network complexity. In this paper, we present a configurable network service chaining (CNSC) mechanism to provide services for network traffics in a flexible and optimal way. Firstly, we formulate the problem of network service chaining and design an effective service chain construction framework based on integrating software-defined networking (SDN) with network functions virtualization (NFV). Then, we model the service path computation problem as an integer liner optimization problem and propose an algorithm named SPCM to cooperatively combine service function instances with a network utility maximum policy. In the procedure of SPCM, we achieve the service node mapping by defining a service capacity matrix for substrate nodes, and work out the optimal link mapping policies with segment routing. Finally, the simulation results indicate that the average request acceptance ratio and resources utilization ratio can reach above 85% and 75% by our SPCM algorithm, respectively. Upon the prototype system, it is demonstrated that CNSC outperforms other approaches and can provide flexible and scalable network services.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.988-1000
• /
• 1999

An experimental study is presented for the effect of number of terms of a pewee series type stress function on stress analysis around a hole in tensile loaded plate. The hybrid method coupling photoelastsic data inputs and complex variable formulations involving conformal mappings and analytical continuity is used to calculate tangential stress on the boundary of the hole in uniaxially loaded, finite width tensile plate. In order to measure isochromatic data accurately, actual photoelastic fringe patterns are two times multiplied and sharpened by digital image processing. For qualitative comparison, actual fringes are compared with calculated ones. For quantitative comparison, percentage errors and standard deviations with respect to percentage errors are caculated for all measured points by changing the number of terms of stress function. The experimental results indicate that stress concentration factors analyzed by the hybrid method are accurate within three percent compared with ones obtained by theoretical and finite element analysis.

• 한국농공학회논문집
• /
• 제54권6호
• /
• pp.133-142
• /
• 2012

The objective of this study was to correct the bias of the Representative Concentration Pathways (RCP)-based future precipitation data using a quantile mapping method. This method was adopted to correct extreme values because it was designed to adjust simulated data using probability distribution function. The Generalized Extreme Value (GEV) distribution was used to fit distribution for precipitation data obtained from the Korea Meteorological Administration (KMA). The resolutions of precipitation data was 12.5 km in space and 3-hour in time. As the results of bias correction over the past 30 years (1976~2005), the annual precipitation was increased 16.3 % overall. And the results for 90 years (divided into 2011~2040, 2041~2070, 2071~2100) were that the future annual precipitation were increased 8.8 %, 9.6 %, 11.3 % respectively. It also had stronger correction effects on high value than low value. It was concluded that a quantile mapping appeared a good method of correcting extreme value.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 추계학술대회
• /
• pp.86-89
• /
• 1995

A clinically oriented 32 channel Electroencephalogram (EEG) and evoked potential (EP) mapping system has been developed. The EEG and EP signals acquired from 32-channel electrodes are amplified by the pre-amplifier located near patient and are then tither amplified by main amplifier. An automatic artifact rejection scheme is employed using a neural network by which examination time is reduced substantially. Auditary and visual stimuli are used for the evoked potential mapping. A user-friendly graphical interface based on the Microsoft Window 3.1 is developed for the operation of the system. Statistical databases for the poop and individual comparisons are also included to support statistically based diagnosis.

• 한국과학교육학회지
• /
• 제14권3호
• /
• pp.285-292
• /
• 1994

The purpose of this study is to investigate the misconception about circulatory / excretional system and to determine the effectiveness of two teaching strategies. The subject was 214 middle school students. The control group was instructed with the traditional teaching method.On the other hand, the experimental group was taught with the concept mapping teaching method. Then the effectiveness of the two teaching strategies were compared in terms with the changes of their conceptions about circulatory/excertional system. The major findings of this study are as follows. 1. The major misconception types were identified. 1) The function of blood is only transportation. 2) The artery is equal to arterial blood. 3) The colon and the anus are also excretional organs. 4) Urine is formed from the bladder. 5) Urine and feces are also excrement. 2. Different conceptional change was observed between control group and experimental group at 0.05 significance level. The concept mapping strategy was more effective than traditional teaching method. 3. No significent difference was found between male and female students in the effectiveness of concept mapping strategy.

• 대한기계학회논문집B
• /
• 제23권6호
• /
• pp.703-712
• /
• 1999

This paper suggests an automatic elliptic grid generation method that is well-suited for the numerical mapping of complex geometries which are easily obtained from general CAD programs. An LBLADI solver is used for the governing mapping equations to have the strong diagonal dominance. The full boundary control method is adopted to determine the control functions of the equations, which allows the control of the grid regarding spacing and angle control at all boundary surfaces. The solution method presented here provides the capability of mapping very complicated geometries by defining grid point locations only along the boundaries. In the automated elliptic grid generation procedure, it is showed that strong diagonal dominance is essential to achieve successful mapping irrespective of the initial grid condition provided. To demonstrate the robustness of this method, it is applied to the thermal flow like the natural convection between eccentric cylinders. The results agree well with others.

• 전기학회논문지
• /
• 제63권11호
• /
• pp.1564-1570
• /
• 2014

An electric vehicle (EV) not only receives electric power from the electric vehicle supply equipment (EVSE), but it also exchanges the information regarding charging process with the power gird through the EVSE. However, the EV and EVSE communicate using the ISO/IEC 15118 standard while the EVSE and power grid communicate using the IEC 61850 standard. Therefore, the EVSE should support both the ISO/IEC 15118 and IEC 61850 standards, and provide a data mapping function between the two communication protocols so that the EV and power grid, which support different protocols, can communicate with each other throughout the charging process. In this paper, we propose a mapping method of the EVSE, which converts the ISO/IEC 15118 data to IEC 61850 and vice versa, based on the XML schema of each protocol. The proposed method converts the data using the XSL (eXtensible Stylesheet Language) method, which defines the data mapping between two XML schemas. Our approach is more flexible and easier to maintain against changes in charging scenarios and the standards than other existing approaches such as one-to-one data mapping methods.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권11호
• /
• pp.5392-5418
• /
• 2017

The primary aim of this paper is to propose a non-linear regression based technique for mapping different network Quality of Service (QoS) factors to an integrated end-user Quality of Experience (QoE) or Mean Opinion Score (MOS) value for an online video streaming service on a mobile phone. We use six network QoS factors for finding out the user QoE. The contribution of this paper is threefold. First, we investigate the impact of the network QoS factors on the perceived video quality. Next, we perform an individual mapping of the significant network QoS parameters obtained in stage 1 to the user QoE based upon a non-linear regression method. The optimal QoS to QoE mapping function is chosen based upon a decision variable. In the final stage, we evaluate the integrated QoE of the system by taking the combined effect of all the QoS factors considered. Extensive subjective tests comprising of over 50 people across a wide variety of video contents encoded with H.265/HEVC and VP9 codec have been conducted in order to gather the actual MOS data for the purpose of QoS to QoE mapping. Our proposed hybrid model has been validated against unseen data and reveals good prediction accuracy.

• 한국통신학회논문지
• /
• 제36권10B호
• /
• pp.1252-1257
• /
• 2011

이 논문에서는 오디오 신호의 스펙트럼 가시광선 스펙트럼으로 매핑하는 감성 조명 방식을 제안한다. 인간의 청각이 인지하는 오디오 스펙트럼의 전 대역을 시각이 인지하는 가시광 스펙트럼의 전 대역으로 매핑하는 조명 알고리즘을 제안하며 특히 기본적인 선행 매핑 방식과 특정 주파수 대역을 가조하는 비선형 스펙트럼 매핑 방식에 대하여 논한다. 알고리즘의 효과를 실험하기 위하여 DSP 보드로 구현함으로써 제안된 조명 방식의 응용 가능성을 보였다. 따라서 제안된 조명 방식은 스탠드 LED 조명, 화병 LED 조명, 분수용 LED 조명, 건축물용 LED 조명, 노래방용 LED 조명, 청각 장애인용 LED 음악조명 등의 분야에 응용될 수 있을 것이다.

• International Journal of Control, Automation, and Systems
• /
• 제5권3호
• /
• pp.251-268
• /
• 2007

A Gaussian sum filter (GSF) is proposed in this paper on simultaneous localization and mapping (SLAM) for mobile robot navigation. In particular, the SLAM problem is tackled here for cases when only bearing measurements are available. Within the stochastic mapping framework using an extended Kalman filter (EKF), a Gaussian probability density function (pdf) is assumed to describe the range-and-bearing sensor noise. In the case of a bearing-only sensor, a sum of weighted Gaussians is used to represent the non-Gaussian robot-landmark range uncertainty, resulting in a bank of EKFs for estimation of the robot and landmark locations. In our approach, the Gaussian parameters are designed on the basis of minimizing the representation error. The computational complexity of the GSF is reduced by applying the sequential probability ratio test (SPRT) to remove under-performing EKFs. Extensive experimental results are included to demonstrate the effectiveness and efficiency of the proposed techniques.