• Journal of Applied Biological Chemistry
• /
• v.54 no.2
• /
• pp.126-134
• /
• 2011

In this study, the characteristics of alcohol fermentation using ripe Daebong persimmon juice were studied in static fermentation condition by Saccharomycess cerevisiae CS02 in an effort to develop new types of functional wine. Attempts were made to modify the ripe Daebong persimmon juice in order to find suitable conditions for alcohol fermentation. The modified ripe Daebong persimmon juice that was most suitable for alcohol fermentation contained $24^{\circ}brix$ of sugar supplemented with sucrose as a carbon source and 0.5 g/L of $(NH_4)_2HPO_4$ as a nitrogen source. After 9 days of fermentation at $25^{\circ}C$, $12.2{\pm}0.02%$ of alcohol was produced from the modified juice and its pH markedly decreased to $3.97{\pm}0.02$. The wine contained free sugar such as fructose ($0.12{\pm}0.02$ g/L), some organic acids such as malic acid ($35.92{\pm}0.24$ g/L), succinic acid ($8.12{\pm}0.03$ g/L), oxalic acid ($22.14{\pm}0.11$ g/L), and citric acid ($13.63{\pm}0.08$ g/L), as well as some flavanols and phenolic acids such as catechin gallate ($38.99{\pm}0.32$ mg/L), epicatechin gallate ($110.21{\pm}0.16$ mg/L), gallic acid ($163.88{\pm}1.11$ mg/L), epigallocatechin ($15.97{\pm}0.18$ mg/L), and tannic acid ($13.36{\pm}0.02$ mg/L). In addition, the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical (84.25%) and $ABTS^{\cdot+}$ radical (99.65%) scavenging activities were increased significantly with a corresponding increased in the organic acid and phenolic acid contents, but decreased in the flavonoids.

• Applied Biological Chemistry
• /
• v.51 no.2
• /
• pp.142-147
• /
• 2008

Nuruk is the Korean traditional Koji that contains various microorganisms and has been used to make the traditional fermented foods including alcoholic beverages. Rhizopus oryzae KSD-815 was isolated from the alcohol-fermenting Nuruk used for manufacturing traditional alcohol. In this study, the authors reported the isolation and identification of four lipids from the Nuruk (Rhizopus oryzae KSD-815) that inoculated wheat with Rhizopus oryzae KSD-815. The dried and powdered Nuruk (Rhizopus oryzae KSD-815) were extracted three times at room temperature with 80% aqueous MeOH. The extracts were partitioned with EtOAc, n-BuOH, and water, successively. The EtOAc extract was suspended in 80% MeOH and partitioned repeatedly with n-hexane. From the n-hexane fraction, four lipids were isolated through the repeated silica gel and ODS column chromatographies. According to the results of physico-chemical data including NMR, GC and MS, the chemical structures of the compounds were determined as linolenic acid methyl ester (1), palmitic acid methyl ester (2), linoleic acid (3), palmitic acid (4). Cytotoxicity was evaluated in huamn breast cancer cells, MDA-MB-231 and human hepatocarcinoma, SK-HEP-1 cells using MTT assay. Exposure of compounds 1 and 3 led to a dose-dependent inhibition of cell viability in both cancer cell lines. In addition, treatment of RAW264.7 cells with compound 3 caused inhibition of lipopolysaccharide/interferon-${\gamma}$-induced nitric oxide production.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.3
• /
• pp.482-490
• /
• 2017

This study was carried out to analyze the pasting and antioxidant characteristics of cooked mixed grains consisting of germinated millet and rice with varying addition rates and cooking methods. In this study, we chose two foxtail millets: glutinous ('Samdachal') and non-glutinous ('Samdame'), along with a glutinous proso millet ('Ibaekchal'). Cooked mixed grain rice-added germinated millet was cooked by general and high pressure cooking methods, with and without fermented alcohol. The peak and trough viscosity of germinated millet were decreased significantly with increasing amounts of germinated millet. The phenolic compounds and radical scavenging activity of cooked rice-added germinated millet increased significantly with the addition of germinated millet (p<0.05). The total polyphenol contents of cooked rice-added germinated Samdachal, Samdame, and Ibaekchal were 127.74~194.11, 128.20~192.56, and $128.88{\sim}171.28{\mu}g\;GAE/g$, respectively. The total flavonoid contents were 13.79~30.23, 14.77~25.99, and $15.28{\sim}29.56{\mu}g\;CE/g$, respectively. DPPH and ABTS radical scavenging activities were 3.31~5.73 and 6.31~9.69 mg TE/100 g for cooked rice-added germinated Samdachal; 3.14~8.58 and 6.05~10.19 mg TE/100 g for Samdame; and 3.37~7.45 and 6.27~9.27 mg TE/100 g for Ibaekchal, respectively. In this study, phenolic compounds and radical scavenging activity of cooked mixed grain rice-added germinated millet with different addition rates and cooking methods can be used as basic data for manufacturing processed products.

• Archives of design research
• /
• v.17 no.4
• /
• pp.177-190
• /
• 2004

The purpose of this study is to provide domestic small and medium manufacturing businesses with effective ways of introducing and promoting design management, earnestly, as a key strategy for raising corporate competitiveness. For the purpose, this researcher discussed the management property of small and medium businesses, the introducing process and method and the necessity of promoting design management in small and medium businesses. Then the researcher reviewed and analyzed existing empirical studies to know the current status of design introduction and design management promotion i domestic small and medium businesses. Results of the study can be described as below. Prerequisite to the successful introduction by domestic small and medium businesses of design management are three CEO determinations - the firm will to the necessity of design introduction, the firm conviction in design efficacy, and the clear recognition of the existential value of design - and the establishment of at least five infrastructures -design organization, CDO, designers, design policy, and design strategy. For the promoting and succeeding in the execution of design management, design management system should have established based on such determinations and infrastructures, and CEOs should have design management mind firmly established and driven and realized next activities in the process of product development. 1) Set the principle of design priority in a new product development and establish an appropriate production system and environment. 2) Decide a new design development as the top-priority task of management and then practice it in a strategic way. 3) Be positive in design investment while accepting design management as a concept related not to cost, but to investment. 4) Utilize design extensively under the understanding that design management has something to do with corporate design system as a whole. 5) Treat design as the most valuable resource of business under the recognition that design is the most important determinant of corporate competitiveness.

• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.192-217
• /
• 2008

This paper investigated the perceived criticalities and patterns of Korean Professional Engineer's competency regarding the working activities of automative product development, manufacturing, etc by using questionnaires responded to the survey which were applied to the automotive professors, experts and professional engineers (vocational parties) by e/mail, etc. This research investigated the following questions: First, what are the characteristic patterns, relevancy and perceived criticalities of Korean Professional Engineer's competencies? Second, What are the ranked priority of the Korean Professional Engineers' competencies? Are there any differency for each item, sub group of job, intelectual criterior of the competencies between relevancy and perceived criticalities according to the types of vocational parties, etc.? Accoring to the results; first, Professor group showed highest points among 3 groups per each item of the competencies by vocational parties Second, Chassis design group ranked top position among the 8 sub groups by vocational parties and, third, Problem Solving Knowledge ranked highest points than any others. Korean Professional Engineers are found to be positioned as key members, leaders and managers on surveying market, product planning, designing product & components, developing component parts, establishing shop with production equipment, managing quality control & material handling, organizing relevant meetings, developing human resources by training and learning, to back up finance with law matters, cooperating with concerned parties to achieve organizational goals, and to coordinate projects. etc, identifying ethical issues and business skills in order to survive and win to be competitive in various kinds of the automotive industry battle fields.

• Journal of radiological science and technology
• /
• v.34 no.1
• /
• pp.17-25
• /
• 2011

In this study, we examined the impact caused by chronic exposure to Mn by investigating the degree of brain activation based on the data of recognition activities using fMRI (functional magnetic resonance imaging). A questionnaire survey, blood tests, and fMRI tests were carried out with respect to two groups. Group 1 was an exposure group consisting of 15 male workers who are 34 years old or older, and who worked for longer than 10 years in a shipbuilding factory as a welder. Group 2 was a control group consisting of 15 workers in manufacturing industries with the same gender and age. The results showed that blood Mn concentration of Group 1($1.3\;{\mu}g/dl$) was significantly higher than that of Group 2($0.8\;{\mu}g/dl$)(p < 0.001), and Pallidal Index (PI) of Group 1 was also significantly higher than that of Group 2 (p < 0.001). PI value of the group whose blood Mn concentration was $0.93\;{\mu}g/dl$ or higher was significantly higher than that of the group whose blood Mn concentration was less than $0.93 \;{\mu}g/dl$ (p < 0.001). As for brain activity area within the control group, the right and the left areas of occipital cortex showed significant activity and the left area of middle temporal cortex, the right area of superior inferior frontal cortex and inferior parietal cortex showed significant activity. Unlike the control group, the exposure group showed significant activity on the right area of superior inferior temporal cortex, the left of insula area. In the comparison of brain activity areas between the two groups, the exposure group showed significantly higher activation than the control group in such areas as the right inferior temporal cortex, the left area of superior parietal cortex and occipital cortex, and cerebellum including middle temporal cortex. However, in nowhere the control group showed more activated area than the exposure group. As the final outcome, chronic exposure to Mn increased brain activity during implementation of arithmetic task. In an identical task, activation increased in superior inferior temporal cortex, and insula area. And it was discovered that brain activity increase in temporal area and occipital area was more pronounced in the exposure group than in the control group. This result suggests that chronic exposure to Mn in the work environment affects brain activation neuro-network.

• Journal of Life Science
• /
• v.25 no.1
• /
• pp.68-74
• /
• 2015

Recently developed black waxy rice with a giant embryo ('Nunkeunheukchal', BGE) was selected and processed to produce high quality nutritional food. BGE contains high levels of several phytochemicals with antioxidant activities, as well as other reported health beneficial properties. In addition, the giant embryo has high protein, lipid, and amino acids contents. Within the free amino acids, ${\gamma}$-aminobutyric acid (GABA), a major inhibitory neurotransmitter, has long been used for treating the aftereffects of brain injuries and stroke. A method for manufacturing pop-rice and black rice tea by popping process in BGE is provided to increase a taste, nutrition and functionality. The produced 'pop-rice' showed increased protein (11.3%) and lipid (3.7%) contents compared with control variety, IB ('Ilmibyeo'). In addition, melanoidin related products, polyphenol and functional amino acid contents were increased by the popping process. Pop-rice tea made of BGE showed the highest extraction of total sugar, glucose, raffinose and sucrose (4 times higher than brown rice) by hot water. Scavenging activity ($SC_{50}$) of processed BGE rice powder showed strong antioxidative activity of 0.24 mg/ml using DPPH and 1.82 mg/ml using ABTs method. Thereafter, these results suggested that the popping processed rice of BGE could be one of the promising materials for healthy food development.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.2
• /
• pp.96-104
• /
• 2017

This study was carried out to compare the cooking and antioxidant characteristics of rice containing varying amounts of glutinous rice and cooked by two methods. Rice containing glutinous rice was cooked by general and high-pressure cooking methods with and without fermented alcohol. Pasting characteristics of cooked rice were decreased with increasing amounts of glutinous rice. The water binding capacity and swelling power were significantly decreased with increasing amounts of glutinous rice; however, water solubility indices were significantly increased. Palatability characteristics of cooked rice containing glutinous rice were similar to those of cooked rice without glutinous rice. Total polyphenol contents of cooked rice containing glutinous rice and fermented alcohol were quite different, but this difference was not significant. Total flavonoid contents were increased with increasing amounts of glutinous rice. Total flavonoid content by general cooking method for rice containing 20% glutinous rice and fermented alcohol was $23.20{\pm}0.61{\mu}g\;CE/g$. DPPH radical-scavenging activities for samples with and without glutinous rice were 2.97-5.19 and 3.19-5.45 mg TE/100 g, respectively. ABTS radical-scavenging activity by high-pressure cooking method for rice containing 20% glutinous rice and fermented alcohol was $19.48{\pm}0.63mg\;TE/100g$. In this study, cooking and antioxidant characteristics of cooked rice containing glutinous rice generated data useful for manufacturing processed products.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.183-198
• /
• 1997

This case study was conducted by verification the site characteristics based on the questionnaire and interview obtained from the all factories located at No. 1 developing area in Kumi industrial complex. The site characteristics were presumed from the process of location behavior and spatial linkage. Kumi industrial complex was developed to improve export industry at national levels by providing chief land price and benefiting various tax. Kumi industrial complex which enticed many factories is playing an important role in export industry in Korea. At beginning, the detention of large enterprises promoted the establishment of related small to medium sized factories into the complex. Two distinctive industries. textile and electronic, were reflected by the purpose to establish the complex and industrial characteristics of Taegu city. respectively. In Kumi industrial complex, positive responses on traffic and raw material supply and negative reactions on the environmental impact on social community as well as high labor charge were investigated. Especially the higher labor cost prevented to hire laborers effectively. In the linkages of spatial and raw material, most factories in the complex depended on the availability of out side the Kumi city. For the textile factories, the supply of raw material and parts were relied on Taegu and/or other cities, whereas in electronic factories purchased them mainly from other cities and partly from abroad. Although questionnaire and interview suggested it, most of the parts were supplied by a parts maturing companies on the complex to a few large enterprises. In the marketing linkage, textile factories revealed higher relation-ship with the foreign countries and sewing factories in Korea. On the other hand, electronic factories have strong relation-ships in the marketing linkage to the parts supplying companies in the complex or large-scale resembling companies in other cities. In the textile companies, the right for decision on purchasing raw materials and parts is belonging to the owner whereas mother enterprise usually have the right for the marketing. In the case of the electronic factories, all the purchasing activities are related to the sub-contracting companies. In the service linkage, the Quality of the service created spatial distinction. There was high linkages on inside of Kumi complex for the low grade services such as repairing and installing machines, whereas strong linkages on outside of the complex for the high grade services such as management, law, taxation, new product development. and manufacturing technology. In the linkages of activity on the R&D (research and development), electronic factories do not have sufficiently qualified institutes in the complex. Strong regional linkages in the field of textile and electronic industries revealed limitations of the local industrial complex. In the sub-contracting linkage, high linkage ship within Kumi boundary reflected the characteristics of industrial site in the complex. There, most decisions by the companies centered by the mother enterprise.

• Journal of Technology Innovation
• /
• v.17 no.2
• /
• pp.55-80
• /
• 2009

Technology innovation activity plays a pivotal role in constructing the entrance barrier for other firms and making process improvement and new product. and these activities give a profit increase and growth to firms. Thus, technology innovation activity can reduce the default risk of firms. However, technology innovation activity can also increase the firm's default risk because technology innovation activity requires too much investment of the firm's resources and has the uncertainty on success. The purpose of this study is to examine the effect of technology innovation activity on the default risk of firms. This study's sample consists of manufacturing firms listed on the Korea Securities Market and The Kosdaq Market from January 1,2000 to December 31, 2008. This study makes use of R&D intensity as an proxy variable of technology innovation activity. The default probability which proxies the default risk of firms is measured by the Merton's(l974) debt pricing model. The main empirical results are as follows. First, from the empirical results, it is found that technology innovation activity has a negative and significant effect on the default risk of firms independent of the Korea Securities Market and Kosdaq Market. In other words, technology innovation activity reduces the default risk of firms. Second, technology innovation activity reduces the default risk of firms independent of firm size, firm age, and credit score. Third, the results of robust analysis also show that technology innovation activity is the important factor which decreases the default risk of firms. These results imply that a manager must show continuous interest and investment in technology innovation activity of one's firm. And a policymaker also need design an economic policy to promote the technology innovation activity of firms.