• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.457-463
• /
• 2014

This study was carried out to find out major factors to mitigate carbon emission using Life Cycle Assessment (LCA). System boundary of LCA was confined from sowing to packaging during vegetable production. Input amount of agri-materials was calculated on 2007 Income reference of white radish, chinese cabbage and chive produced at open field and film house published by Rural Development Administration. Domestic data and Ecoinvent data were used for emission factors of each agri-material based on the 1996 IPCC guideline. Carbon footprint of white radish was 0.19 kg $CO_2kg^{-1}$ at open fields, 0.133 kg $CO_2kg^{-1}$ at film house, that of chinese cabbage was 0.22 kg $CO_2kg^{-1}$ at open fields, 0.19 kg $CO_2kg^{-1}$ at film house, and that of chive was 0.66 kg $CO_2kg^{-1}$ at open fields and 1.04 kg $CO_2kg^{-1}$ at film house. The high carbon footprint of chive was related to lower vegetable production and higher fuel usage as compared to white radish and Chinese cabbage. The mean proportion of carbon emission was 35.7% during the manufacturing byproduct fertilizer; white radish at open fields was 50.6%, white radish at film house 13.1%, Chinese cabbage at outdoor 38.4%, Chinese cabbage at film house 34.0%, chive at outdoor 50.6%, and chive at film house 36.0%. Carbon emission, on average, for the step of manufacturing and combustion accounted for 16.1% of the total emission; white radish at open fields was 4.3%, white radish at film house 15.6%, Chinese cabbage at open fields 6.9%, Chinese cabbage at film house 19.0%, chive at open fields 12.5%, and chive at film house 29.1%. On the while, mean proportion of carbon footprint for the step of $N_2O$ emission was 29.2%; white radish at open fields was 39.2%, white radish at film house 41.9%, Chinese cabbage at open fields 34.4%, Chinese cabbage at film house 23.1%, chive at open fields 28.8%, and chive at film house 17.1%. Fertilizer was the primary factor and fuel was the secondary factor for carbon emission among the vegetables of this study. It was suggested to use Heug-To-Ram web-service system, http://soil.rda.go.kr, for the scientific fertilization based on soil testing, and for increase of energy efficiency to produce low carbon vegetable.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.2
• /
• pp.124-139
• /
• 2000

This study was performed to investigate monoacetylbenzidine(MABZ) and benzidine(BZ) hemoglobin adducts among workers who worked at benzidine based dye manufacturing company, and exposed by benzidine and benzidine based dye. The hemoglobin adducts were compared with work environment assessment result for evaluating the usefulness of biological monitoring. The mean BZ hemoglobin adducts among the first synthesis worker's hemoglobin adducts were $40.69{\mu}gBZ/g$ Hb and those of dry and packing workers were $22.14{\mu}gBZ/g$ Hb. The mean of MABZ hemoglobin adducts among 1st synthesis workers were $255.84{\mu}gMABZ/g$ Hb, dispersion worker's hemoglobin adducts were $76.17{\mu}gMABZ/g$ Hb and synthesis worker's hemoglogin adducts were $28.66{\mu}gMABZ/g$ Hb. Work environment assessment results during past 3 years were $0.0065mg/m^3$ and $0.5659mg/m^3$ of benzidine based dye concentration in ambient air of drying and packing only. Dye producing process was categorized by the possibility of exposure to benzidine and benzidine based dye. BZ and MABZ hemoglobin adducts were $19.55{\mu}gBZ/g$ Hb, $119.80{\mu}gMABZ/g$ Hb among workers who exposed by benzidine dihydrochloride and $16.32{\mu}gBZ/g$ Hb, $316.56{\mu}gMABZ/g$ Hb among workers who exposed by benzidine based dye. BZ hemoglobin adducts were not detected among control group and MABZ hemoglobin adducts were $5.33{\mu}gMABZ/g$ Hb. The differences between control and other exposed group was statistically significant. But there was no statistically significant differences between benzidine dihydrochloride exposed process and benzidine based dye exposed group. BZ and MABZ hemoglobin adducts were $2.23{\mu}gBZ/g$ Hb, $76.17{\mu}gMABZ/g$ Hb and $3.46{\mu}gBZ/g$ Hb, $21.33{\mu}gMABZ/g$ Hb. So hemoglobin adducts of MABZ were 5 ~ 30 time higher than those of BZ(P<0.003). Above results indicate that work environment assessment didn't detected benzidine and benzidine based dye in ambient air but biological monitoring detected those of hemoglobin adducts. Two group's hemoglobin adducts exposed benzidine dihydrochloride and benzidine based dye were high level but wasn't statistically significant and those were not detected in control group.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.851-857
• /
• 2018

In this research, LCA analysis of the manufacturing process of pot bearing for fixed, movable in all directions, movable in one direction was carried out to analyze the environmental load using the LCA methodology. Especially, the water footprint that has been and issue in recent years was analyzed. As a result of LCA, it was analyzed that the contribution of the plate was more than 64.2% in all of the six impact categories in the case of fixed pot bearing base, and more than 94% in the category of resource depletion and photochemical oxidant creation. In the case of all direction pot bearing and one direction pot bearing, the contribution of PTFE was the highest in the global warming and stratospheric ozone depletion, and the contribution by the plate was higher in the other impact categories. The water footprint of each type of pot bearing was analyzed as $22.4m^3\;H_2O\;eq/kg$ for one direction pot bearing, $17.1m^3\;H_2O\;eq/kg$ for fixed pot bearing, and $14.1m^3\;H_2O\;eq/kg$ for all direction pot bearing. As a result of life cycle analysis, the contribution of water use in manufacturing was more than 65% in all three types. The results of this study can be used as basic data for decision making in construction method and material selection of bridges in the future.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.3
• /
• pp.57-68
• /
• 2018

Purpose - The purpose of this study is to classify that the quality factors for comparing the Visegrard Group with the Nordic Council have historical similarities against Germany and the Soviet Union. However, this is because in the integrated European market, the competitiveness possessed by the two groups of countries is invested in the priority order to grow. Research design, data, and methodology - The study was conducted on the research design, and the reason for trying to compare the competence of the automobile industry in the assessment of industrial capability is that the Visegrard Group focuses on automotive production and the Nordic Association focuses on the commercialization of the automobile(market). In this study, searching and quantifying indirect evidence was made through standards are more complementary in Europe since each country acts like the role of the European automotive industry for example, which is different from the realistic evaluation criteria, are more important than those of the United States(first in the world) or Germany(first in Europe). Results - The results of this study are as follows: In the global EV market U.S.(export: $ 2.62 billion /share: 36.7%), Germany($ 1.29 billion /18.1%), France($ 390 million /5.4%), United Kingdom($ 380 million /5.4%), and South Korea($ 320 million/ 4.4%). South Korea's share of the EV market is 4.4%, while TSI reaches at +0.9 which measures the comparative advantage of a specific commodity in the world trade market. There is great potential for evaluated as products processing in export competition. But, commercialization, standardization, and overall market expansion did not have a positive impact on global satisfaction. Conclusions - EVs put importance on various utilities. So this suggests that Korea's exports to the EU, including the Visegrard Group, should be more focused on marketability when illuminating with a sharing industrial system under the European Union. It is necessary to specialize in manufacturing and commercialization by country(region) to prepare sharing economy and blockchain in order to create a smart-sharing city linked on artificial intelligence, as the commercialization of electric vehicles, which will have a larger growth rate than that of manufacturing in the fourth revolutionary era.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.2
• /
• pp.15-19
• /
• 2012

Wood wastes could be renewable resources by recycling as particleboard manufacturing or energy production. Particle board is the most common item of wood waste recycling and energy production from wood wastes has highlighted for energy recovery to reduce greenhouse gas generation in recent years. The aim of this study was to evaluate the environmental benefits of the processes for particle board manufacturing and energy production. The functional unit was one ton of wood wastes and the environmental impact was analyzed by life cycle assessment methodology. The result was that 112kg of carbon dioxide equivalent was produced from particle board manufacturing process and 382kg of carbon dioxide equivalent was produced from combined heat and power generation process. The concept of temporary biomass carbon storage was to applied to this study.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.3 s.47
• /
• pp.531-545
• /
• 1994

In a TV component manufacturing factory, 102 male workers aged $20{\sim}39$ years old were participated in testing for physical fitness. At the same time, worker's periodic health examination was done. Test battery for physical fitness include grip strength, trunk flexion, standing long jump, side step, single leg balance with eye close, push ups and Harvard step test. As a result of testing for physical fitness, synthetically, there is no difference between manufacturing workers and officers. By bioelectrical impedance test, it means a declining tendency to all 7 factors in the obese workers, and so, it is important for obese workers not only to promote physical fitness but also to promote health. Excluding grip strength and single leg balance with eye close, 5 fitness factors are negatively associated with degree of diastolic Blood pressure, but it is statistically not significant. And levels of sGOT & sGPT have no association with physical fitness factors.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.907-915
• /
• 2018

With the increase of metal usage in various industries, metal pollution and ecological toxicity in the environmental system have become a significant concern. A geo-statistical index has been widely used to determine contamination level with normalization through a background value. In this study, geo-statistical indexes such as an enrichment factor, accumulation index, and potential ecological risk index were used to assess metal pollution in soil at locations associated with shipbuilding manufacturing industries. Metal contamination, especially of Cu and Pb, was observed in some samples located closer to manufacturing sites. Enrichment factor and accumulation (IGEO) values were indicative of concerning levels of soil contamination in specific samples, and the soil contamination could be induced by anthropogenic sources. In further study, after more detailed sampling for soil and potential pollution sources, high interpretation techniques such as Pb isotope analysis and X-ray analysis will be needed to investigate source identification.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.4
• /
• pp.393-405
• /
• 2018

Objective: This study examines the types of hazardous factors in the working environment and the time-trend for their exposure levels over 10 years (2007 to 2016). Study Design and Method: The types of hazardous factors and exposure levels were drawn from the 19 measurement reports on the working environment over 10 years at a shock absorber manufacturing facility. Risk assessment of the types of factors and time-trend of exposure levels were evaluated using the factors and exposure levels. Results: A total of 34 hazardous factors were evaluated. The types were noise, 15 organic compounds, seven kinds of acid sand alkalis, eight kinds of heavy metals, and three other compounds. Special management materials used were nickel, hexavalent chrome, and sulfuric acid. Human carcinogens (1A) used were trichloroethylene, nickel, and sulfuric acid. There were six types of substances belonging to the IARC's 2B (body carcinogens) classification or higher, including, methyl isobutyl ketone, ethyl benzene, and trichloroethylene. No detection was found for 627 out of the 2065 total measurements in 19 exposure survey reports, representing 30.4%. Organic solvents, acid and alkali products, and heavy metals showed continuous low exposure concentrations. Noise, welding fumes, and the evaluation of mixed solvents show a gradual decrease in geometric mean and maximum over the time-trend of 10 years. Conclusions: In the case of a shock absorber manufacturing facility, the hazardous factors of noise and the evaluation of mixed solvents still indicate high concentrations exceeding the exposure limits and necessitate reduction studies. These two factors and welding fumes showed a continuous decrease in their ten-year tendency. Organic compounds, acids/alkalis, and heavy metals were managed smoothly in a work environment of continuous low concentrations.

• Physical Therapy Rehabilitation Science
• /
• v.10 no.1
• /
• pp.48-54
• /
• 2021

Objective: The purpose of this study is to investigate the effect of exercise programs according to various music tempo on pain, posture, and function of automobile parts manufacturing workers. Design: Two-group pretest-posttest design. Methods: This study was an exercise program tailored to the prevention and treatment of musculoskeletal diseases were performed for a total of 4 weeks and 3 times a week for 60 minutes. The exercise program consisted of customized exercises according to the characteristics of the subject's musculoskeletal system. The subject provided music during the exercise program, and the group who applied the fast tempo music listened to the music of 120~140 bpm, and the group who applied the slow tempo music listened to the music of the low tempo of 60~80 bpm. Results: Significant differences were found in pain and physical function before and after the fast tempo music group and the slow tempo music group (p<0.01). However, there was a significant difference in posture characteristics only in the fast tempo music group (p<0.01). In terms of pain, physical function, and posture characteristics, the fast tempo music group showed significant improvement compared to the slow music tempo group (p<0.05). Conclusions: A customized exercise program using fast-tempo music and slow-tempo music to workers in the automobile parts manufacturing industry, significant differences in pain, physical function, and posture characteristics applied with fast-tempo music were found. In the future, applying an exercise program with a fast tempo is expected to help improve musculoskeletal disorders.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.342-347
• /
• 2020

Recently, as the collaborative robot has been introduced into the domestic industrial robot market, it is installed mainly in the manufacturing industry. Collaborative robots are subject to the safety regulations of industrial robots by Article 93 of the Safety Inspection of the Industrial Safety and Health Act. The sites where collaborative robots are to be installed must perform risk assessments for robots-humans, work environments, and work methods and reduce the risks according to ISO 10218-2 and ISO 12100. On the other hand, because it is early in the introduction of collaborative robots, new risks for collaborative robots have not been issued, and risk assessments are unfamiliar and difficult to apply in the workplace. The risk assessment of collaborative robots aims to identify and reduce the risk of a high probability of occurrence by focusing on the abnormal behavior of humans, human errors, equipment defects, and interlock functions. In this study, a risk assessment was applied to a domestic automobile parts production plant, and improvement measures were drawn. This risk assessment is expected to be useful for improving the safety of small businesses by continuously discovering risk assessment examples of collaborative robots.