• Journal of Korean Medicine Rehabilitation
• /
• v.30 no.3
• /
• pp.89-101
• /
• 2020

Objectives The purpose of this study is to assess the effectiveness of Chuna manual therapy for shoulder pain in hemiplegic patients after stroke. Methods For a systematic review and meta-analysis, we set a key question in accordance with participants, intervention, comparison, outcome, study design (PICO-SD). we searched for clinical studies that conducted chuna manual therapy for shoulder pain in hemiplegic patients after stroke 7 databases until September 2019. Only randomized controlled trials were chosen. Results Total 14 randomized controlled trials were chosen for systematic review and meta-analysis. 9 studies used efficacy rate as evaluation tool, and 8 used visual analogue scale. Pressure method (壓力型) was used in 11 studies, followed by osteopathy method (整骨型) and wave motion method (波動型) in 9 studies. Chuna manual therapy showed statistically significant pain reduction effect. Through meta analysis, Chuna manual therapy showed significant pain reducing effect except the study with Chuna manual therapy and electroacupuncture compared to electroacupuncture only. Conclusion As a result, Chuna manual therapy showed statistically significant effect in pain reduction. However, almost studies were evaluated in a state of having probable high risk of bias. This suggests that it requires attention to make an interpretation in this study. Furthermore, more clinical research need to be accomplished in the future.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.15 no.1
• /
• pp.75-87
• /
• 2020

Objectives : This study aimed to evaluate the effectiveness of manual therapy for wrist pain. Methods : We searched electronic databases (PubMed, Embase, Cochrane, CAJ, KISS, RISS, NDSL, OASIS, and KMBASE) for randomized controlled trials for manual therapy as a treatment for wrist pain. Results : A total of 9 randomized controlled trials were selected and meta-analysis was conducted on 6 studies. Three studies with different design of the intervention/control group were excluded from the meta-analysis. A high risk of bias was observed for both performance bias and detection bias. Conclusions : Our systematic review verified the clinical effect of manual therapy on wrist pain. Based on the results of this study, it is expected that clinical studies on wrist diseases and high-level follow-up studies will be conducted.

• Journal of Korean Physical Therapy Science
• /
• v.29 no.1
• /
• pp.1-14
• /
• 2022

Background: The legal and academic definitions of manual therapy in domestic and foreign countries are reviewed, and problems and improvement plan of manual therapy are established through comparative analysis of the current status and system of manual therapy in Korea and abroad. Design: Review. Methods: In this study, the development direction of manual therapy in Korea was derived by analyzing the definition, application status, and service system of domestic and foreign manual therapy. Results: Firstly, it lays the foundation for a more comprehensive national health promotion by solving problems arising from the current unclear definition of manual therapy. Secondly, the subject of manual therapy is a physiotherapist but the subject of claiming non-benefit costs is a doctor, moreover illegal manual therapy by an unqualified or non-professional who is not a physiotherapist is being carried out in the medical field. Thirdly, in order to provide quality physiotherapy services (manual therapy) under a cooperative relationship between medical staff and physiotherapists, it is appropriate that physiotherapist have a clear "prescription" or "request" by a doctor. Fourth, there is no provision for the preparation of medical records in the current Medical Technicians Act, and this causes safety accidents of patients during manual treatment. Conclusion: As described above, the current manual therapy in Korea is being performed indiscriminately without a clear interpretation, resulting in various problems. I think it is necessary to lay the foundation for institutional and legal re-establishment of manual therapy through additional research on manual therapy in the future.

• Korea Journal of Hospital Management
• /
• v.28 no.3
• /
• pp.47-57
• /
• 2023

Purpose: Health expenditure and utilization of Korean medicine are increasing every year. Since Chuna Manual Therapy was covered by National Health Insurance in 2019, it is predicted that the usage of Chuna Manual Therapy would be also increasing. However, there are few studies about Chuna Manual Therapy using Korean National Health Insurance claims database. Therefore, we will investigate the utilization trend of outpatient's Chuna Manual Therapy using Korean National Health Insurance database and suggest political implications. Methodology: The Korean National Health Insurance claims database was used to identify outpatient's Chuna Manual Therapy usage spanning 4 years from 2019-2023 and the number of Chuna Manual Therapy claims were approximately 18.61 million. Findings: The number of Chuna Manual Therapy claims and patients, health expenditure of Chuna Manual Therapy have been increasing spanning 4 years among over 65 aged. In the case of female patients, the number of Chuna Manual Therapy claims was more than male patients and health spending related to Chuna Manual Therapy was also higher than male patients. Most patients visited Korean medicine clinics due to musculoskeletal diseases, and most claims were from rural regions. Practical Implication: Since Chuna Manual Therapy was covered by National Health Insurance in 2019, Utilization of Chuna Manual Therapy has been increased overall. In particular, Chuna Manual Therapy is mostly implemented in the elderly, Korean medicine clinics, and local areas, thus policy managers will need to consider this.

• International Journal of Highway Engineering
• /
• v.16 no.3
• /
• pp.109-117
• /
• 2014

PURPOSES : This study analyzes the available working time at work-zone on the Expressway in accordance to the new capacity manual. METHODS : Sensitivity analysis on variables were conducted to calculate the adjusted capacity at work-zone based on previous researches. RESULTS : The main factors which affect available working time at the work-zone were its capacity, number of lanes, terrain and lane width. Other factors have minimal effect on the available working time. Based on the analysis, a calendar of lane closures was suggested. CONCLUSIONS : A series of studies concluded that the capacity at work-zone in the new capacity manual reduced to 76-82% of the existing manual. As such, the available working time decreased. Furthermore, the factors affecting the available working time needs to be considered when making a plan to rehabilitate the distressed pavement.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.596-605
• /
• 1994

An efficient measurement and evaluation system for hand tool tasks will provide a practical solution to the problem of designing and evaluating manual tool tasks in the workplace. Few studies on the biomechanical analysis of hand postures and tool handling tasks exist because of the lack of appropriate measurement techniques for hand force. A measurement system for the finger forces and joint angles for analysis of manual tool handling tasks was developed in this study. The measurement system consists of a force sensing glove made from twelve Force Sensitive Resistors and an angle-measuring glove (Cyberglove$\^$TM/, Virtual technologies) with eighteen joint angle sensors. A biomechanical model of the hand using the data from the measurement system was also developed. Systems of computerized procedures were implemented integrating the hand posture measurement system, biomechanical analysis system, and the task analysis system for manual tool handling tasks. The measurement system was useful in providing the hand force data needed for an existing task analysis system used in CTD risk evaluation. It is expected that the hand posture measurement developed in this study will provide an, efficient and cost-effective solution to task analysis of manual tool handling tasks. These tasks are becoming increasingly important areas of occupational health and safety of the country.

• Journal of Korean Medicine Rehabilitation
• /
• v.25 no.3
• /
• pp.51-57
• /
• 2015

Objectives To evaluate the evidence supporting the effectiveness of Chuna manual therapy for nocturnal crying. Methods We conducted search across the 3 electronic databases (Pubmed, CAJ and Oasis) to find all of randomized controlled clinical trials(RCTs) that used Chuna manual therapy as a treatment for nocturnal crying. The methodological quality of each RCTs was assessed using the Cochrane Risk of Bias tool and nRCTs was assessed using the Cochrane Risk of Bias Assessment tool for Non-randomized Study tool. Results Two RCTs and three nRCTs met our inclusion criteria. The meta-analysis showed positive results for the use of Chuna manual therapy in terms of the efficacy rate when compared to medication treatments alone. Positive results were also obtained, in terms of the efficacy rate, when comparing Chuna manual therapy combined with acupoint application therapy to Chuna manual therapy alone, but was not statistically significant. Conclusions Our systematic review found encouraging but limited evidence of Chuna manual therapy for nocturnal crying. We recommend clinical trials which compare the effectiveness of Chuna manual therapy with usual care to obtain stronger evidence without the demerits of trial design.

• Journal of Biosystems Engineering
• /
• v.34 no.4
• /
• pp.286-294
• /
• 2009

A high prevalence of protected horticulture farmer's work-related musculo-skeletal disorders (MSDs) have been reported in precedent studies. One of the tasks required ergonomic intervention to reduce the musculo-skeletal risks is the task of product transporting. The purpose of this study is to evaluate quantitatively the spinal load of operator using manual vehicles to predict and prevent musculo-skeletal risks. Spinal load in operators using 4 kinds of manual vehicle were analyzed. Before evaluating spinal load on operator using the manual vehicles by bio-mechanical approach, it is needed to validate human model. In this study, ADAMS LifeMOD human model shows satisfactory results, comparing with already validated model's results or measured results. While Operators pushed the manual vehicles(wheelbarrow, Trolley, 2 wheel cart, and 4 wheel cart) contained loads that were 0 N and 800 N, their spinal loads(compression force, shear force) were evaluated. The compression force demonstrated under the NIOSH action limits - 3410N - for all 4 manual vehicle's operators(McGill 1997; Marras 2000). However, the lateral shear force demonstrated over the University of Waterloo - 500N - for all 3 manual vehicle's operators except 4Wheel cart (Yingline and McGill, 1999). Therefore, operators have risks in prevalence of the musculo-skeletal disorders due to shear force. The findings of this study suggest that it need to be determine the spinal load, especially lateral shear force in designing the manual vehicles in the future.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.12 no.1
• /
• pp.57-70
• /
• 2017

Objectives : The purpose of this study is to find out the factors affecting the cervical angle with kyphosis. Methods : We investigated 340 cases of patients who had cervical kyphosis. We used cervical angle, flexion malposition angle, odontoid process cline angle, axis-atlas cline angle, odontoid process-atlas cline angle and occiput-atlas cline angle. Correlations between cervical angle and flexion malposition angle, odontoid process cline angle, axis-atlas cline angle, odontoid process-atlas cline angle, occiput-atlas cline angle were analyzed by pearson correlation analysis. Results : The correlation between cervical angle and flexion malposition angle was p-value 0.007, and odontoid process cline angle was p-value 0.002, and axis-atlas cline angle was p-value 0.000, and odontoid process-atlas cline angle was p-value 0.000, and occiput-atlas cline angle was p-value 0.012. Conclusions : Flexion malposition angle, odontoid process cline angle are inversely proportional to cervical angle. And correlation is statistically significant(p<0.01). Axis-atlas cline angle, odontoid process-atlas cline angle are proportional to cervical angle. And correlation is statistically significant(p<0.01). Occiput-atlas cline angle is proportional to cervical angle. And correlation is statistically significant(p<0.05).

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.26 no.2
• /
• pp.37-44
• /
• 2020

Background: This study aims to provide basic data for college students' employment and career choice by investigating their job perception of orthopedic manual physical therapy, one of the physical therapy fields of physical therapy majors. Methods: A total of 267 subjects were surveyed on occupational awareness among college students majoring in physical therapy in Gwangju. The collected data were analyzed for frequency analysis and cross-sectional study using the SPSS 22.0 statistical program. A chi-square test was conducted to determine if there were any significant differences. Results: As a result of the survey on the recognition of orthopedic manual physical therapy, interest in orthopedic manual physical therapy was high, but the method of treatment, effectiveness and information were insufficient. Conclusions: For the awareness and education of students' orthopedic manual physical therapy, schools and institutional organizations need education and special lectures on orthopedic manual physical therapy for students.