• Journal of Korean Medicine Rehabilitation
• /
• v.29 no.3
• /
• pp.141-148
• /
• 2019

Cervical spondylotic myelopathy (CSM) is a severe disease that usually needs surgical treatment. We have treated two CSM patients with Korean traditonal medicine, which includes acupuncture, pharmacopuncture, herbal medicine and manual treatment (Chuna). For objective evaluation, we used Nurick's classification, JOA (Japanses Orthopedic Association) score, grip and release test and hand grasping power measurement. Post-treatment analysis has shown that grip and release test score and grasping power of two patients were both remarkably improved, along with the improvements on both Nurick's classification and JOA score. This study showed that Korean traditional medicine could be effective conservative treatment for CSM.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.5
• /
• pp.280-285
• /
• 2019

PURPOSE. The present study was designed to examine the clinical fit of fixed dental prosthesis fabricated by the milling-sintering method using a presintered cobalt-chromium alloy. MATERIALS AND METHODS. Two single metal-ceramic crowns were fabricated via milling-sintering method and casting method in each of the twelve consecutive patients who required an implant-supported fixed prosthesis. In the milling-sintering method, the prosthetic coping was designed in computer software, and the design was converted to a non-precious alloy coping using milling and post-sintering process. In the casting method, the conventional manual fabrication process was applied. The absolute marginal discrepancy of the prostheses was evaluated intraorally using the triple-scan technique. Statistical analysis was conducted using Mann-Whitney U test (${\alpha}=.05$). RESULTS. Eight patients (66.7%) showed a lower marginal discrepancy of the prostheses made using the milling-sintering method than that of the prosthesis made by the casting method. Statistically, the misfit of the prosthesis fabricated using the milling-sintering method was not significantly different from that fabricated using the casting method (P=.782). There was no tendency between the amount of marginal discrepancy and the measurement point. CONCLUSION. The overall marginal fit of prosthesis fabricated by milling-sintering using a presintered alloy was comparable to that of the prosthesis fabricated by the conventional casting method in clinical use.

• Journal of odor and indoor environment
• /
• v.17 no.4
• /
• pp.346-354
• /
• 2018

In this study, the condition of the hazardous materials in the bus was monitored according to the ventilation mode of the air conditioning system during bus service. The bus was surveyed using the indoor air quality measurement method of public transportation vehicles within one year of delivery. We evaluate the $CO_2$ and $PM_{10}$, which are the controlled parameters in buses by the Ministry of Environment, and VOCs and HCHO, the non-controlled parameters. The $PM_{10}$ concentration increased due to outdoor air intake; however the $CO_2$ concentration was found to decrease. In addition, the concentration of VOCs and HCHO was found to decrease due to the forced ventilation system and the outdoor air intake. These results show that the concentration of the other materials except $PM_{10}$ can be changed due to the outside air concentration and forced ventilation system. Therefore, through indoor air quality characteristics of the bus according to air condition system are intended to be used as the basis of an operation manual.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.549-557
• /
• 2022

Tunnel face mapping involves the determination of rock discontinuities or weak rock conditions where extra support might be required. In this study, we investigated the application of Lidar scanning and photogrammetry to quantitatively characterize discontinuities of the rock mass on the tunnel face during excavation. The 3D models of tunnel faces generated by using these methods enable accurate and automatic discontinuity measurement to overcome the limitations of manual mapping. The results of this study show that both photogrammetry and Lidar can be used to reconstruct the 3D model of the tunnel face, although the photogrammetric 3D model is less detailed than its counterpart produced by Lidar. Given acceptable accuracy and cost-effectiveness, photogrammetry can be a fast, reliable, and low-cost alternative to Lidar for acquiring 3D models and determining rock discontinuities on tunnel faces.

• Journal of the Korean Society of Safety
• /
• v.37 no.6
• /
• pp.102-107
• /
• 2022

South Korea will soon be a super-aged society, as more than 20.6% of its population will be 65 years and older by 2025. As of 2022, 17.5% of the total population in South Korea is 65 years and older, which exceeds the set threshold for an aged society, where more than 14% of the population is 65 years and older. The proportion of older subway construction workers has increased. Aging workers and their work stress negatively impact their workability. A previous study demonstrated that the stress index measured using the uBioMacpa measurement device (Macpa stress index) had a significant correlation with work stress in South Korea. The device tests vascular health and measures stress levels via Macpa signal analysis. In this study, the pulse waves of subway construction workers were measured using uBioMacpa to identify their stress levels. The stress levels were analyzed by age, years of service, job position, employment type, and work type. Herein, these statistics could not be easily represented by a normal distribution; therefore, the Kruskal-Wallis test, a nonparametric statistical method, was used for the analysis of data. The results showed that age, job position, employment type, and working type affected the Macpa stress index and the stress levels of workers increased with age. In terms of job position, technical engineers were more stressed than other workers because of their poor working environment. In terms of employment type, daily-wage workers were more stressed than other workers. In terms of working type, tunneling, waterproofing, and construction scored the highest Macpa stress indexes without any significant difference, whereas earthworks scored the lowest. Based on the analysis of Macpa stress index, safety and health management plans were proposed to reduce the stress levels of workers. Moreover, a manual for efficient stress management must be developed for subway construction workers.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.33 no.3
• /
• pp.67-72
• /
• 2022

Objectives: This study investigated the reliability and validity of the Korean version of the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5) Level 2 Cross-Cutting Symptom Measure-Patient-Reported Outcomes Measurement Information System (PROMIS)-Depression and the Irritability for parents of children aged 6-17 years. Methods: Participants were 190 children diagnosed with depressive disorder (n=14), anxiety disorder (n=21), attention-deficit/hyperactivity disorder (ADHD; n=111), ADHD with anxious depression (n=13), and tic disorder with somatic symptoms (n=31). Patients were 8-15 years of age. The participants' mothers completed the Korean versions of the DSM-5 Level 2 Cross-Cutting Symptom Measure-PROMIS Depression and Irritability (Affective Reactivity Index, ARI), and the Korean Child Behavior Checklist (K-CBCL). Using these data, we calculated the reliability coefficient and examined the concurrent and discriminant validity of the PROMIS Depression and the Irritability (ARI) scales for assessing depression and irritability in children. Results: The reliability coefficient of the PROMIS Depression scale (Cronbach's α) was 0.93. The correlation coefficient with the K-CBCL DSM emotional problem score was 0.71. The PROMIS Depression scale significantly discriminated children with depressive disorders from those with other conditions. The reliability coefficient of the Irritability (ARI) scale was 0.91, suggesting its high reliability. Conclusion: Our results suggest that the Korean version of the DSM-5 Level 2 Cross-Cutting Symptom Measure for Depression and Irritability Scales for parents of children aged 6-17 years is reliable and valid and may be an efficient alternative to the K-CBCL.

• Journal of the Korean Society of Physical Medicine
• /
• v.18 no.1
• /
• pp.99-110
• /
• 2023

PURPOSE: This study was conducted to suggest a way to easily understand and utilize the International Classification of Functioning, Disability and Health (ICF) or Korean Standard Classification of Functioning, Disability and Health (KCF), a common and standard language related to health information. METHODS: The tools used by physical therapists to evaluate the functioning of neurological patients were collected from 10 domestic hospitals. By applying the ICF linking rule, two experts compared, analyzed, and linked the concepts in the items of the collected tools and the ICF/KCF codes. The frequency of use of the selected tool, the matching rate of the liking results of two experts, and the number of the codes linked were treated as descriptive statistics and the code set was presented as a list. RESULTS: The berg balance scale, trunk impairment scale, timed up and go test, functional ambulation category, 6 Minute walk test, manual muscle test, and range of motion measurements were the most commonly used tools for evaluating the functioning. The total number of items of the seven tools was 33, and the codes linked to the ICF/KCF were 69. Twenty-two codes were mapped, excluding duplicate codes. Ten codes in the body function, 11 codes in the activity, and one code in the environmental factor were included. CONCLUSION: The information on the development process of the code set will increase the understanding of ICF/KCF and the developed code set can conveniently be used for collecting patients' functioning information.

• Journal of Korean Physical Therapy Science
• /
• v.30 no.1
• /
• pp.62-71
• /
• 2023

Background: This study was performed to evaluate the effects of Thermal stimulation combined virtual reality training (TV) on improvement of upper extremity AROM and function in patient with chronic stroke. Design: Two groups pre-post randomized controlled design. Methods: A single-blind, randomized controlled trial was conducted with 30 chronic stroke patients. They were randomly allocated two groups; the TV group (n=15) and Virtual Reality training group (VT) (n=15). The TV group received treatment for 30 min - 15 min of Thermal stimulation, and 15 min of VR training. The VT group received 15 min of VR training. Each group performed 30 minutes a day 3 times a week for 8 weeks. The primary outcome upper extremity AROM and function were measured by a active range of motion test, Manual Function Test (MFT) and Jebsen-Taylor hand function Test (JTT). The upper extremity active range of motion was evaluated using a digital dual inclinometer. MFT and JTT were used to evaluate the hand function. The measurement were performed before and after the 8 weeks intervention period. Results: Both groups demonstrated significant improvement of outcome in muscle strength and upper extremity function during intervention period. TV group revealed significant differences in AROM and upper extremity function as compared to the VT groups (p<.05). Our results showed that TV was more effective on upper extremity AROM and function in patients with chronic stroke. Conclusion: Both groups demonstrated significant improvement of outcome in muscle strength and upper extremity function during intervention period. TV group revealed significant differences in AROM and upper extremity function as compared to the VT groups (p<.05). Our results showed that TV was more effective on upper extremity AROM and function in patients with chronic stroke.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.474-477
• /
• 2021

Recently, in order to prevent the proliferation of COVID-19, which began in earnest in 2020, an increasing number of places have been measuring the temperature and required to wear a mask. However, as wearing a mask and checking the temperature are typically measured directly by a person or by a single individual positioned in front of the machine, standards may vary based on the person's manual measurement method, wasting workforce. While standing in front of a device often measures the maximum temperature of the face, the standard of fever is also unclear. Both approaches can create bottleneck situations when checking large numbers of people. Furthermore, it is unable to conduct periodic measurements and tracking because the measuring machines are generally put only at the entrance. Thus, this study suggests a method for preventing the spread of infectious diseases by automatically identifying and displaying unmasked people and those with fever in real-time using a general camera, a thermal imaging camera, and an artificial intelligence algorithm.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.4
• /
• pp.52-59
• /
• 2023

Flatness inspection of PC elements is normally conducted manually by inspectors at manufacturing sites. However, the manual inspection is error-prone and subjective, so it is necessary to develop a robust and efficient flatness measurement method. Recently, a few studies of laser scanner-based flatness inspection have been conducted. However, little attention on field applicability in terms of accuracy, time and cost has been paid. To tackle the limitation, this study aims to compare three sensing method including floor profiler, terrestrial laser scanner and total station for flatness inspection of PC elements. A series of experiments on two full-scale PC slabs were conducted and the results show that the laser scanning method is the most suitable for the PC elements flatness inspection in the aspects of accuracy, time and cost.