• Journal of the Korea Safety Management & Science
• /
• v.19 no.4
• /
• pp.77-85
• /
• 2017

As industrialization progresses, mass production becomes a smart production system. However, industrial accidents do not decline, and during the course of industrialization, due to the logic of economic agents that have an economical and effective employment environment, they are changed to non-regular workers. The Occupational Safety and Health Act stipulates that the safety managers must be distinguished and the safety managers perform the task of conducting industrial accidents by balancing the duties and regulations specified in the Act on Special Measures for Deregulation. Safety administrators providing advice on issues needed to prevent industrial accidents and preventive measures We would like to present the problems and improvements that may arise due to safety managers' replacement due to accidents caused by industrial accidents or accidents.

• Journal of agricultural medicine and community health
• /
• v.22 no.1
• /
• pp.75-83
• /
• 1997

The medical insurance system has been adopted in 1989. Since then, the utilization of medical care services has increased rapidly. It appears that the medical institution needs more nursing manpower such as nurses and nurse aides to meet an increased demand for medical care for the residents. However, the medical care clinics run by a medical practitioners has a more shortage of nursing manpower than hospitals. The purpose of this survey was to analyze the current employment status and to obtain an opinion on the improvement of utilization such as recruitment and retention of nursing manpower. The questionnaire sent to the private physician and the response rate was 28.7% ; 87 out of 300 physicians. 82.6% of the respondents employed nurses aides rather than nurses and an average number of employees per clinic was 2.5 persons. Most physicians had difficulties in recruiting nursing manpower. It took more than one month for replacement on average, therefore, they were suffering from giving good continual care for the patient and also high resignation of nursing personnel. The low wage, long working hours, hard work and lack of incentives are the biggest reasons for the difficulty in recruiting and retaining of the nursing personnel obtained for the clinics survey. The above mentioned problems would be solved in the near future by changing those difficulties. In the meantime, the private physicians are marking an effort to retain the nursing personnel by keeping a relationship of the private physician's cooperatives.

• Advances in concrete construction
• /
• v.12 no.5
• /
• pp.429-437
• /
• 2021

In the era of building engineering the intensification of Self Compacting Concrete (SCC) is world-shattering magnetism. It has lot of rewards over ordinary concrete i.e., enrichment in production, cutback in manpower, brilliant retort to load and vibration along with improved durability. In the present study, the mechanical strength of CM-2 (SCC containing 10% of rice husk ash (RHA) as cement replacement and 600 grams of glass fibers per cubic meter) was investigated at various dosages of cement replacement by fly ash (FA) and GGBS. A total of 17 SCC mixtures including two control SCC mixtures (CM-1 and CM-2) were developed for investigating fresh and hardened properties in which, ten ternary cementitious blends of SCC by blending OPC+RHA+FA, OPC+RHA+GGBS and five quaternary cementitious blends (OPC+RHA+FA+GGBS) at different replacement dosages of FA and GGBS were developed with reference to CM-2. For constant water-cement ratio (0.42) and dosage of SP (2.5%), the addition of glass fibers (600 grams/m³) in CM-1 i.e., CM-2 shows lower workability but higher mechanical strength. While fly ash based ternary blends (OPC+RHA+FA) show better workability but lower mechanical strength as FA content increases in comparison to GGBS based ternary blends (OPC+RHA+GGBS) on increasing GGBS content. The pattern for mixtures appeared to exhibit higher workablity as that of the concentration of FA+GGBS rises in quaternary blends (OPC+RHA+FA+GGBS). A decrease in compressive strength at 7-days was noticed with an increase in the percentage of FA and GGBS as cement replacement in ternary and quaternary blended mixtures with respect to CM-2. The highest 28-days compressive strength (41.92 MPa) was observed for mix QM-3 and the lowest (33.18 MPa) for mix QM-5.

• Korean Journal of Organic Agriculture
• /
• v.31 no.4
• /
• pp.259-289
• /
• 2023

This study analyzed farmers' and experts' perceptions of the Agricultural Income Survey (AIS) conducted by the Rural Development Administration and estimated its socioeconomic value. The research surveyed 104 farmers in Gyeongsangbuk-do and Jeollanam-do. To estimate the AIS's socioeconomic value, this study examined public information projects in the field of agriculture and public information, proposing an estimation methodology based on prior research. The socioeconomic value of the AIS was calculated in three stages (information generation, collection and analysis, and utilization) using the replacement cost and contingent valuation methods. In 2020, the estimated socioeconomic value of the AIS ranged from a minimum of KRW 631.2 billion to a maximum of KRW 799.1 billion per year. To improve the socioeconomic value of the AIS, it is important to booster awareness, expand sample sizes for more reliable data, increase manpower and budget, refine survey questions, and enhance analyzing capabilities. And it's crucial to foster cooperation with surveyed farms, promote collaboration among investigative agencies, improve investigator skills, and strengthen management capabilities to facilitate information dissemination.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.36-38
• /
• 1993

This study considers the economic aspect of the distribution automation system, which is the decision-making criteria of the electric utilities for the investment. The feeder automation candidate region is divided into two types of the urban and the rural. The total investment cost of the feeder automation for each type is estimated. The annual cost, is also estimated, by finding the fixed charge rate. To compare the annual cost and the economic effect cost, for the investment decision-making, the costs are quantitatively estimated on the following effects : the manpower replacement, the outage cost saving, the main transformer utilization improvement, the feeder utilization improvement, and the line loss reduction.

• The Journal of Fisheries Business Administration
• /
• v.54 no.2
• /
• pp.1-14
• /
• 2023

The sustainability of fishing villages is threatened by manpower shortages due to population aging and poor settlement conditions. In the reality of poor fishing villages, the importance of women's labor is more emphasized than that of the past because female workers are key workers in fishing labor, processing and sales of marine products. However, policy support for female fishermen is not sufficient. The reason for this is that policy makers did not properly recognize the labor value of female fishermen. In fact, fishing villages have emphasized the importance of female workforce as a slogan, but there has been no attempt to estimate the labor value. There was not even a review of the methodology for estimating the value of labor that was attempted in similar fields. As a result, the policy importance of female fishermen was underestimated for there was no attempt to evaluate their value even though women had been continuously participating in the fishery from the past. Female fishermen's labor is under the dual labor structure of housework and fishing labor. Therefore, in this study, housework and fishing labor were estimated separately and the total labor value was calculated. The basic data necessary for estimating the labor value of female fishermen were obtained through a survey. The method of estimating the labor value of female fishermen was used in combination with the present income method and the total replacement cost method. As a result of the study, the total labor value of female fishermen was about 4.4 trillion won, which is about half of the total fishery production of 9 trillion won in Korea.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.2
• /
• pp.63-70
• /
• 2008

Reinforcing steel work plays an important role in terms of its structural performance or weight of construction cost for reinforced concrete structures. Precise estimation of re-bar quantity gives a basis for managing the reinforcing steel work effectively. However, the estimation process is still performed ineffectively based upon the expert's experience or manpower in spite of the advanced technology or improvement efforts. Therefore, the purpose of this research is to develop a prototype system for taking-off the quantity of reinforcing steel bars quickly and accurately in an order consistent with the specific members identified on the drawings. An estimate algorithm considering the connection, settlement and coating thickness of re-bars was suggested regarding to their replacement conditions which places more emphasis on constructibility. Also, this system produces the shop drawings automatically with the calculation results with work zone information.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.2
• /
• pp.101-108
• /
• 2022

Centrifugal pumps are typically used in many slurry industries to transport solid materials. Solid particles in the slurry frequently shock the walls inside the pump, significantly abrading the flow path. Wear damage causes replacement of the pump components, which wastes manpower and time. Therefore, previous studies have been conducted on factors to improve efficiency and life time. This study identifies trends in pumps supplying lime to desulfurized devices from thermal power plants. The shear stress transport(SST) model is used to determine the erosion trend of the centrifugal pump that transfers lime slurry. The purpose of this study is to identify efficiency and erosion trends by selecting three of the various impeller design elements. The three impeller blade design variables mentioned above represent the inlet draft angle and blade angle of leading edge(L.E) and trailing edge(T.E). The maximum value of the erosion density rate tends to be similar to the Input power.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.57-64
• /
• 2016

The purpose of this research is to study, through the Delphi method, using an expert panel of 14 persons, effective workforce plans for CCTV applications. The need for professional manpower for activities related to CCTV has emerged through technological development and increased utilization of the CCTV industry sectors. Efficient workforce improvement for the CCTV sector presented in this study are in regards to student education. This study proposes an appropriate description for curriculum and related promotional information. This study should create an environment for overcoming the lack of student involvement and commitment to the environment and ensure training after qualification status after the training provided, including measures to maintain. In order to prevent employee turnover, CCTV training is necessary to actively review government support measures. This study also proposes providing a proper educational environment and supply of replacement staff members brought on by training courses. In terms of education administration bodies, we propose that education and training in CCTV management provide a variety of benefits including participation in education, adequate publicity through cooperation with relevant institutions, and introduces new educational programs. We propose providing adequate training that meets the needs of consumer, as well as education, course selection and expanded curriculum in accordance with operating options and the costs of training. In addition, senior student-selected personnel are needed to address the shortage of operators starting work-experience or training.

• Journal of the Society of Disaster Information
• /
• v.3 no.1
• /
• pp.55-68
• /
• 2007

Recently, people in cities of developed countries are exposed to unfortified damages of crime and disaster due to urbanization, industrialization and information-oriented era caused by congestion of population in terms of hardware and various social pathology phenomena and frequent and large scale of disaster caused by crime and disorder, which occur in the course of going through nuclear family, a gap between rich and poor and aging society in terms of software. In this regard, demand for security upon individual life and property has been increased but the police that are responsible for the public security does not effectively reduce damage in life and property because their activities are mainly oriented in coping with security accidents more than prevention. Shortage of manpower and budget, retarded equipment, and heavy overwork are the reasons. In order to confront with this kind of situation, we should utilize CCTV system with the purpose of declining possible chances of crime, not for eliminating cause of crime as crime prevention activities to predict danger in advance as a way of prevention and we may expect a role of damage prevention by installing CCTV in places where security accident may possibly happen. In conclusion, there are invasion of privacy, misuse of the system, insufficiency of overall monitoring office management, lack of citizens' understanding and economical allotment of the system installation costs in installation of CCTV system. However. it is necessary to install the CCTV system for effective prevention of crime and prevention activities of security accidents and accurate PR of purposes of installing CCTV to local residents, establishing relevant laws about system misuse, allotment of equipment costs and fees by R&D of the system machinery, cost reduction method of storage, management and replacement, saving costs from co-operative attitude of government, and local autonomous entities and local residents should be involved.