• 한국항해학회지
• /
• 제21권3호
• /
• pp.55-66
• /
• 1997

In this paper, applications of neural networks to vibration control of flexible single link robot manipulator are ocnsidered. The architecture of neural networks is a hidden layer, which is comprised of self-recurrent one. Tow neural networks are utilized in a control system ; one as an identifier is called neuro identifier and the othe ra s a controller is called neuro controller. The neural networks can be used to approximate any continuous function to any desired degree of accuracy and the weights are updated by dynamic error-backpropagation algorithm(DEA). To guarantee concegence and to get faster learning, an approach that uses adaptive learning rates is developed by introducing a Lyapunov function. When a flexible manipulator is ratated by a motor through the fixed end, transverse vibration may occur. The motor torque should be controlle dinsuch as way, that the motor is rotated by a specified angle. while simulataneously stabilizing vibration of the flexible manipulators so that it is arrested as soon as possible at the end of rotation. Accurate vibration control of lightweight manipulator during the large body motions, as well as the flexural vibrations. Therefore, dynamic models for a flexible single link manipulator is derived, and LQR controller and nerual networks controller are composed. The effectiveness of the proposed nerual networks control system is confirmed by experiments.

• Journal of Biosystems Engineering
• /
• 제22권4호
• /
• pp.411-420
• /
• 1997

The mechanization efficiency using high ability machines such as tractors or combines in a paddy field rice farm is high. Mechanization in harvesting fruits and vegetables is difficult, because they are easy to be damaged. Therefore, Advanced techniques for careful handling fruits and vegetables are necessary in automation and robotization. An apple harvesting robot must have a recognition device to detect the positioning of fruit, manipulators which function like human arms, and hand to take off the fruit. This study is related to the development of a rotatic hand as the first stage in developing the apple harvesting robot. The results are summarized as follows. 1. It was found that a hand that was eccentric in rotatory motion, was better than a hand of semicircular up-and-down motion in harvesting efficiency. 2. The hand was developed to control changes in grasp forces by using tape-type switch sensor which was attatched to fingers' inside. 3. Initial finger positioning was set up to control accurate harvesting by using a tow step fingering position. 4. This study showed the possibility of apple harvesting using the developed robot hand.

• 한국정밀공학회지
• /
• 제26권4호
• /
• pp.82-90
• /
• 2009

Pneumatic cylinder is one of the low cost actuation sources which have been applied in industrial and prosthetic application since it has a high power/weight ratio, a high-tension force and a long durability However, the control problems of pneumatic systems, oscillatory motion and compliance, have prevented their widespread use in advanced robotics. To overcome these shortcomings, a number of newer pneumatic actuators have been developed such as McKibben Muscle, Rubber Actuator and Pneumatic Artificial Muscle (PAM) Manipulators. In this paper, one solution for position control of a robot arm, which is driven by two pneumatic artificial muscles, is presented. However, some limitations still exist, such as a deterioration of the performance of transient response due to the changes in the external load of the robot arm. To overcome this problem, a switching algorithm of the control parameter using a learning vector quantization neural network (LVQNN) is proposed in this paper. This estimates the external load of the pneumatic artificial muscle manipulator. The effectiveness of the proposed control algorithm is demonstrated through experiments with different external working loads.

• 한국통신학회논문지
• /
• 제18권9호
• /
• pp.1376-1385
• /
• 1993

본 연구에서는 고속운전 및 빈번한 부하의 변동에 대해서도 효과적인 과도응답 및 정상상태 응답특성을 갖도록 조작키(actuator)의 동특성방정식을 유도하여 매니퓰레이터의 동특성방정식과 결합시켜 2차 미분방정식으로 표현되는 새로운 매니퓰레이터의 모델 시스템 알고리즘을 제안하였다. 또한 비선형 궤환과 선형화 기법을 적용하여 변수들이 상호간에 심하게 결합되어 있는 시변 비선형 등특성모델을 감결합된 선형모델로 변환한다. 이럴 경구 모델의 제어기 구성시 시스템의 안정성을 얻기 위하여 극 재배치 법을 적용하였으며, 또한 경로오차를 최소화 시켜주기 위하여 오차방정식에 대한 최적제어를 적용하였다. 제안한 알고리즘을 조작키가 포함된 3관절 로보트 메니퓰레이터에 적용하여 컴퓨터 시뮬레이션한 결과 만족할만한 결과를 얻었다.

• 한국생산제조학회지
• /
• 제25권6호
• /
• pp.492-497
• /
• 2016

Teaching an industrial robot is still a dangerous and time-consuming process. It is expected that a robot can track a trajectory that is repeatedly taught by a human operator. Teaching a robot in joint space is easier than that in Cartesian space or a work space because the robot will never lose its stability when it is taught and operated in a joint space. However, it is very easy for a robot to lose its stability when it is taught in a work space. This is because of the singular points problem in kinematics for manipulators. Thus, experts should teach a given task to a robot in a careful manner. A new algorithm that avoids the problem of singular points is proposed. Using this proposed method, a user can freely teach a robot without the chance of instability in an entire work space.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.126-132
• /
• 2006

In this paper, we aim to control the sound and vibration spatially, so that a desired physical variable is enhanced within a zone we select. This is somewhat analogous to have manipulators that can draw wave shape in any place we want. Brightness and contrast control have shown that such a manipulation is possible by controlling multiple sources[J.-W. Choi and Y.-H. Kim, J. Acoust. Soc. Am. 111(4), 2002]. In particular, the acoustic brightness control seeks a way to increase loudness of sound over a chosen area, and the contrast control aims to enhance loudness difference between two neighboring regions. This enables us to manipulate spatial distribution of sound by making two different kinds of zone ? the bright and dark zone- at the same time. The primary focus of this study is to unit the theoretical formulation of the brightness and contrast control and to find a link between these methods, as well as its relation to other conventional techniques. It is also shown that we can generate various shape of wave field by transforming the domain we consider.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.428-433
• /
• 1997

This paper presents a new control strategy for the position and force control of flexible manipulators. The governing equation of motion of a two-link flexible manipulator which features piezoceramic actuators bonded on each flexible beam is derived via Hamilton's principle. The control torque of the motor to command desired position and force is determined by a sliding mode controller on the basis of the rigid-mode dynamics. In the controller formulation, the sliding mode controller with perturbation estimation(SMCPE) is adopted to determine appropriate control gains. The SMCPE is then incorporated with the fuzzy technique to mitigate inherent chattering problem while maintaining the stability of the system. A set of fuzzy parameters and control rules are obtained from a relation between estimated perturbation and actual perturbation. During the commanded motion, undesirable oscillation is actively suppressed by applying feedback control voltages to the piezoceramic actuators. These feedback voltages are also determined by the SMCPE. Consequently, accurate force and position control of a two-link flexible manipulator are achieved. Computer simulations are undertaken in order to demonstrate the effectiveness of the proposed control methodology.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.345-350
• /
• 2003

핫셀내에서 원격작업을 수행할 수 있는 천정 이동 서보 매니퓰레이터 시스템의 시제품을 소개한다. 핫셀(hot cell)에 기본적으로 설치되는 마스터-슬레이브 매니퓰레이터 (master-slave manipulator, MSM)는 팔 길이의 제한 때문에 핫셀내 장치의 유지보수를 효과적으로 수행할 수 없다. 따라서, MSM의 결점인 접근 지역의 제한을 극복하기 위해 천정 이동 서보 매니퓰레이터(Bridge Transported Servo Manipulator, BTSM) 시스템을 개발하고 있다. 개발한 시제품은 부분적으로 와이어 구동방식을 채택한 단일 팔 형태의 힘반영 마스터-슬레이브 서보 매니퓰레이터로 중량 및 규모 대비 취급하중이 기존 마스터-슬레이브 서보 매니퓰레이터 보다 크다. 이는 산업용로봇 및 일반적인 구동장치의 개발에도 유용하다.

• 한국산업융합학회 논문집
• /
• 제17권4호
• /
• pp.217-226
• /
• 2014

Since the world has changed to a society of 21st century high-tech industries, the modern people have become reluctant to work in a difficult and dirty environment. Therefore, unmanned technologies through robots are being demanded. Now days, effects such as voice, control, obstacle avoidance are being suggested, and especially, voice recognition technique that enables convenient interaction between human and machines is very important. In this study, in order to conduct study on the stable motion control of the robot system that has mobile-manipulator structure and is voice command-based, kinetic interpretation and dynamic modeling of two-armed manipulator and three-wheel mobile robot were conducted. In addition, autonomous driving of three-wheel mobile robot and motion control system of two-armed manipulator were designed, and combined robot control through voice command was conducted. For the performance experiment method, driving control and simulation mock experiment of manipulator that has two-armed structure was conducted, and for experiment of combined robot motion control which is voice command-based, through driving control, motion control of two-armed manipulator, and combined control based on voice command, experiment on stable motion control of voice command-based robot system that has mobile-manipulator structure was verified.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.417-420
• /
• 1987

For an increased level of productivity, it is important that the end-point of a robot manipulator moves from an initial location to final position in the minimum time subject to the available maximum actuator's torque (or force) at each joints. The main issue is to develop an algorithm to compute the actuators in real-time. In this paper, a digital state feedback control algorithm has bean developed to obtain the near-minimum-time trajectory for the end-effector of a robot manipulator. In this algorithm, the poles of the linearized closed loop system are judiciously placed in the Z-plane to permit minimum-time response without violating the constraints on the actuator torques. The validity of this algorithm have been established using numerical simulations. A three-link manipulator in chosen for this purpose and results are discussed for three different combinations of initial and final station.