• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.652-657
• /
• 1992

This paper presents to accomplish successfully a multi-input real time control by applying control hierarchy for sliding mode of multi-joint manipulators whose nonlinear terms are regarded as disturbances. We- could simplify the dynamic equations of a manipulator and servo system, which are composed of linear elements and nonlinear elements, by assuming that nonlinear terms, which are Inertia term, gravity force term, Coriolis force term and centrifugal force term, are external disturbance. By simplifying that equation, we could easily obtain a control input which satisfy sliding mode of multi-input system. We proposed a new control input algorithm in order to decrease chattering by changing control input according as effect of disturbance if a control response become within allowance error range. In this experiments, we used DSP(Digital Signal Processor) controller to suppress chattering by time delay of calculation and to carry out real time control.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.436-440
• /
• 1992

As an approach to design the intelligent controller, this paper proposes a new FNN(Fuzzy Neural Network) control method using the hybrid combination of fuzzy logic control and neural network. The proposed FNN controller has two important capabilities, namely, adaptation and learning. These functions are performed by the following process. Firstly, identification of the parameters and estimation of the states for the unknown plant are achieved by the MNN(Model Neural Network) which is continuously trained on-line. And secondly, the learning is performed by FNN controller. The error back propagation algorithm is adopted as a learning technique. The effectiveness of the proposed method will be demonstrated by computer simulation of a two d.o.f. robot manipulator.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.479-484
• /
• 1992

The resolved motion rate control (RMRC) is converting to Joint space trajectory from given Cartesian space trajectory. The RMRC requires the inverse of Jacobian matrix. Since the Jacobian matrix of the redundant robot is generally not square, the pseudo-inverse must be introduced. However the pseudo-inverse is not easy to be implemented on a digital computer in real time as well as mathematically complex. In this paper, a simple fuzzy resolved motion rate control (FRMRC) that can replace the RMRC using pseudo-inverse of Jacobian is proposed. The proposed FRMRC with appropriate fuzzy rules, membership functions and reasoning method can solve the mapping problem between the spaces without complexity. The mapped Joint space trajectory is sufficiently accurate so that it can be directly used to control redundant manipulators. Simulation results verify the efficiency of the proposed idea.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.25-28
• /
• 1999

In this article, a new performance index is proposed to re-duce the collision impulsive force by controlling the null motion of redundant manipulators. First, we define the normalized impact ellipsoid in the viewpoint of instantaneous velocity change. Then, we propose a new impact performance index based on velocity direction for null motion to reduce initial impulsive effects. It gives some advantage for the case of unknown environment. The optimization of this index is that the successional impact forces are reduced. The performance of the proposed index is demonstrated by simulation study.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1145-1149
• /
• 1990

This paper proposes a numerical method for redundant manipulators using predetermined optimal resolution. In order to obtain optimal joint trajectories, it is desirable to formulate redundancy resolution as an optimization problem having an integral cost criterion. We predetermine the trajectories of redundant joints in terms of the Nth partial sum of the Fourier series, which lead to the solution in the desirable homotopy class. Then optimal coefficients of the Fourier series, which yield the optimal solution within the predetermined class, are searched by the Powell's method. The proposed method is applied to a 3-link planar manipulator for cyclic tasks in Cartesian space. As the results, we can obtain the optimal solution in the desirable homotopy class without topological liftings of the solution. To show the validity of the proposed method, we analyze both optimal and extremal solutions by the Fast Fourier Transform (FFT) and discuss joint trajectories on the phase plane.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.878-883
• /
• 1990

There have been many approaches to solve the disturbance rejection problem in the control of LTI systems with state independent disturbances or possibly nonlinear state dependent disturbances. From the view point of each actuator, robot manipulators can be modeled as the second class of systems. With this model, M.Nakao et al. [1] introduced a decentralized control scheme based on interference estimation which is simple in its implementation and robust to the coupled dynamics and parameter variations. This paper systematically generalizes the control scheme to arbitrary finite dimensional LTI systems with disturbances. In doing so, we develop a disturbance observer theory for solving the disturbance rejection problem. We also present a discrete version of the theory with discussion of sampling and time-delay effects.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.6
• /
• pp.936-941
• /
• 1987

This paper prexents an adaptive control scheme which adjusts any deviations of the manipulator from a desired trajectory. The scheme combines a new adaptive control and the conventional nominal control which drives the manipulator to the neighborhood of the trajectory. The proposed adaptive control is developed based on the lineatized perturbation equations in the vicinity of the trajectory and the Lyapunov design method, which makes the perturbations exponentially decay and has less computational requirements than the existing ones.

• Journal of the Korean Society of Industry Convergence
• /
• v.18 no.3
• /
• pp.157-166
• /
• 2015

In this paper, we proposed a new robust control scheme to implement stable control of robot manipulators including nonlinear perameters The proposed robust controller is composed of a nonlinear controller and linear compemsation controller. It shows a good robust performance in reaching mode which does not possess invariance property. Thus, the proposed nonlinear controller showed a good robust performance in the whole region, It was illustrated that the proposed control showed a good transient response and trajectory tracking performance for robot manipulator with four joint by experiments.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.55-61
• /
• 2003

Control of multi-link robot arms is a challenging and difficult problem because of the highly nonlinear dynamics. Independent joint adaptive scheme is developed for control of robot manipulators based on Sugeno-type of fuzzy logic. Fuzzy logic system is used to approximate the coupling forces among the joints, coriolis force, centrifugal force, gravitational force, and frictional forces. The proposed scheme does not require an accurate manipulator dynamic, and it is proved that closed-loop system is asymptotic stable despite the gross robot parameter variations. Numerical simulations for three-axis PUMA robot are included to show the effectiveness of controller.

• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.3
• /
• pp.77-84
• /
• 2004

A robust optimal control design is proposed in this study for rigid robotic systems under the unknown loads and the other uncertainties. The uncertainties are reflected in the performance index, where the uncertainties are bounded for the quadratic square of the states with a positive definite weighting matrix. An iterative algorithm is presented for the determination of the weighting matrix required for necessary robustness. Computer simulations have been done for a weight-lifting operation of a two-link manipulator and the simulation results shows that the proposed algorithm is very effective for a robust control of robotic systems.