• Proceedings of the KACD Conference
• /
• 2001.05a
• /
• pp.247-251
• /
• 2001

;A dental developmental anomaly is defined as an isolated aberration in tooth form, caused by a disturbance or abnormality which occurred during tooth development. There are numerous types of dental anomalies, and a considerable variation in the extent of the defects occurs with each type. Teeth with these anomalies pose unique challenges. Since the defects are not always apparent clinically, they can confuse diagnosticians investigating the etiology of pulpal pathosis. When endodontic treatment is required, the defects often hinder access cavity preparation and canal instrumentation. Treatment planning also becomes more challenging, since the defects can create complicated periodontal problems, and the malformed teeth can be difficult to restore, particularly those weakened by endodontic therapy. Fusion is defined as the joining of two developing tooth germs resulting in a single large tooth structure. The incidence of fusion is < 1% in the Caucasian population, and it is believed that physical force or pressure produces contact of the developing teeth. Clinically and radiographically, a fused tooth usually appears as one large crown with at least partially separated roots and root canals. There may be a vertical groove in the tooth crown delineating the originally separate crowns. Dens invaginatus is a deep surface invagination of the crown or root that is lined by enamel. Teeth in both maxillary and mandibular arches may be affected, but the permanent maxillary lateral incisor is the tooth most commonly involved. Studies have revealed an incidence ranging from 0.25% to as high as 10%. The invagination ranges from a slight pitting to an anomaly occupying most of the crown and root. The invagination frequently communicates with the oral cavity, allowing the entry of irritants and microorganism either directly into pulpal tissues or into an area that is deparated from pulpal tissues by only a thin layer of enamel and dentin. This continuous ingress of irritants and the subsequent inflammation usually lead to necrosis of the adjacent pulp tissue and then to periapical or periodontal abscesses. If the invagination extends from the crown to the periradicular tissue and has no communication with the root canal system, the pulp may remain vital. Recommended treatment of fused tooth and dens invaginatus has been reported in the endodontic literature. This case report describes the endodontic treatment of a maxillary laterl incisors having fused crown and dens invaginatus.natus.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.1
• /
• pp.17-24
• /
• 2011

The aim of this study was to assess the outcome of MTA apexification in young permanent anterior teeth. Among the patients with the traumatized permanent incisors which were treated with MTA apexification, the dental records and radiographs were examined only for the patient who had follow-up examination at least 3 months after the treatment. Forty nine patients with 64 teeth were included in this study. Demographic information, location and type of teeth and periodontal injury, pre-treatment periapical lesion, clinical symptoms, status of MTA filling, healing of apical lesion and apical barrier formation after treatment were investigated. The outcome based on clinical and radiographic criteria were assessed. The results were as follows 1. Of 64 immature permanent incisors with MTA apexification, the clinical and radiographic success rates were 89.1% and 73.4%, respectively. 2. The maxillary incisors showed significantly higher success rates than the mandibular incisors. 3. There was no statistically significant difference in success rates among the teeth with different types of teeth and periodontal injury. 4. The status of MTA filling did not influence the clinical and radiographic success.

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.109-119
• /
• 2004

This study aimed at investigating the skeletal, dentoalveolar, and soft tissue changes of Class III malocclusion cases treated by second molar extraction. The lateral cephalograms of 15 subjects with moderate Class III malocclusion by average ANB $-1.4^{\circ}\;and\;IMPA\;85^{\circ}$ were traced and the computerized superimposition of average craniofacial change was made. The data was gathered and statistically analyzed. The results were as follows: 1 Lower anterior facial height/anterior facial height increased by 0.6%(P<0.01), mandibular plane increased by $1.5^{\circ}$(P<0.05). 2. There was a slightly downward & backward rotation of the mandible. 3. Lower first molar tipped distally by 4.nm(P<0.001), lower anterior teeth lingually tipped by $3.2^{\circ}$(P<0.05). 4. Retracted lower lip improved facial profile. This study may suggest that second molar extraction could be effective for a moderate Class III malocclusion to make distalization of the lower first molar easier and avoid severe lingual tipping of the lower incisor, if the lower third molar has a normal shape, good direction of eruption and adequate time for lower second molar extraction

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.3
• /
• pp.415-430
• /
• 1996

The purpose of this study was to evaluate the stress distributions in the surrounding tissues of the teeth seated by indirect retainers in three different teeth of unilateral distal extension partial denture when the dislodging forces were applied on denture bases. Three dimensional photoelastic models were made. The teeth on which indirect retainers were seated were mandibular left lateral incisor (Model I), canine (Model II), and first premolar (Model III). The dislodging force with 860mg at $45^{\circ}$ angulation to occlusal plane was applied to each model. Three dimensional photoelastic stress analysis was done, and the records were diagramed and analysed. The results were as follows : The compressive stresses were shown the most on neck portions of buccal, mesial, and distal sides in all three models. Slight tensile stresses were shown on neck portions of lingual sides in all three models. The compressive stresses on buccal side were shown in strength in such order as model I, model II, and model III. The compressive stresses were shown on neck portion of mesial and distal sides of model I and mode II, with model I more than Model II. The compressive stresses were shown only on neck portion of mesial side on Model III. The general overall magnitude of compressive stresses were shown in strength in such order as Model I, Model II, and Model III.

• Restorative Dentistry and Endodontics
• /
• v.21 no.2
• /
• pp.451-469
• /
• 1996

The purpose of this study was to investigate the effect of calcium hydroxide and glass ionomer cement fillings on the levels of $LTB_4$ and $LTC_4$ in experimentally inflamed rat dental pulp. The dental pulp in the mandibular incisor of wistar rat was irritated by cutting a 5mm deep hole in the dentin with a twist drill bur of 0.5mm diameter, without cooling. The cavities were filled with calcium hydroxide(light-cured) and glass ionomer cement(light cured). The untreated pulp served as control tissue specimen. After cavity preparations, the rat with or without various treatment were sacrificed in various time by decapitation. The dental pulp tissue were carefully removed and the concentrations of $LTB_4$ and $LTC_4$ were determined by radioimmunoassay. And pulps were examined histologically to observe inflammatory feature. The result were obtained as follows : 1. The inflammatory features of pulps were observed microscopically in all experimental groups. And degree of inflammation was decreased with time. 2. The concentrations of $LTB_4$ and $LTC_4$ for all experimental groups were significantly higher than those for control group 6 hours after cavity preparation(p<0.05). 3. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 6 hours after cavity preparation. In the concentrations of $LTB_4$, significant differences among 3 groups were noted(p<0.05). 4. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 24 hours after cavity preparation. And there were statistically significant difference in concentrations of $LTB_4$ between the group of irritation and the group filled with calcium hydroxide(p<0.05). 5. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 48 hours after cavity preparation. But no statistically difference was found (p>0.05). 6. The concentrations of $LTB_4$ and $LTC_4$ in all experimental groups were highest level at 6 hour after experiment and decreased as time progresses(correlation coefficient>0.8).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.1
• /
• pp.21-28
• /
• 2019

The aim of this study was to compare the shear bond strengths of orthodontic bracket with Conventional primer (CP), Moisture insensitive primer (MIP), and Self-etching primer (SEP). In addition, the effect and the timing of saliva contamination on shear bond strength was evaluated. A total of 135 bovine mandibular incisors were used in the study and divided into 3 groups. Group I, II and III were used CP, MIP, SEP, respectively. Each group was then divided into three subgroups: the group without saliva contamination, the group with primer application after saliva contamination, and the group with saliva contamination after primer application. After the primer application, the metal bracket for the lower incisor was attached and the shear bond strength was measured. The mean shear bond strengths was highest with CP and lowest with SEP in dry condition. However, CP showed a significant decrease in shear bond strength in the presence of saliva contamination. MIP and SEP showed no significant decrease in shear bond strength with saliva contamination.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.3
• /
• pp.255-268
• /
• 2021

The aim of this study was to investigate the relationships between the stages of calcification of various teeth and skeletal maturity stages among Korean subjects. The samples were derived from hand-wrist, panoramic radiographs, and lateral cephalograms of 743 subjects (359 males and 384 females) with ages ranging from 6 to 14 years. Calcification of seven permanent mandibular teeth on the left side were rated according to the system of Demirjian. To evaluate the stage of skeletal maturation, hand-wrist radiographs were analyzed by skeletal maturity indicators (SMI) system of Fishman and lateral cephalograms by cervical vertebral maturation (CVM) method of Baccetti. Statistically significant relationships were found between dental calcification and skeletal maturity stages according to Spearman rank-order correlation coefficients (r = 0.40-0.84, p < 0.001). The second molar showed the highest correlation and central incisor showed the lowest correlation for female and male subjects. For both sexes, canine stage G and second molar stage F were related to SMI 6 and CS 3. Because of the high correlation coefficients, this study suggests that tooth calcification stages from panoramic radiographs might be clinically useful as a maturity indicator of the pubertal growth period in Korean patients.

• The korean journal of orthodontics
• /
• v.33 no.6 s.101
• /
• pp.419-435
• /
• 2003

The purpose of this study was to evaluate growth changes and skeletal characteristics of Korean children with Class III malocclusions from 10 to 14 years of skeletal age. Radiographs of 60 children with Class III malocclusion and 60 normal controls were assessed. Both groups were subdivided into 6 samples according to sex and skeletal age. Skeletal age was assessed using handwrist X-rays using the Greulich and Pyle norms. The Krogman-Walker plane (occipitale-maxillon) through Sella was used as a reference plane in this study with x-axis perpendicular to the x-axis. Sir Student t-tests were conducted to compare the control group with the Class III group according to each gender a:nd age. The characteristics of Class III malocclusion group compared to the control group included shorter anterior and posterior cranial base, shorter and retrusive maxilla, forger mandible, increased molar-incisor distance, retroclined lower incisors, labially proclined upper incisors, and anteriorly located mandibular molar, smaller upper and middle facial depth, and larger lower facial depth. Landmarks representing facial depth, size of maxilla and mandible, and their AP relationship including anterior facial height indicate that growth characteristic was determined early in life. But growth Pattern of cranial base and some of the dental landmarks showed progressive divergence between Control and Class III groups with age. The position of the posterior border of the mandible was found to be significantly forward in both females and males by the age of 14 and at the anterior border in males and females at all ages. Hyperdivergent mandibular plane, changes in anterior segment of mandible, small anterior cranial base, and decrease in cranial base flexure was also noted.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.199-207
• /
• 2013

Purpose: The importance of occlusal contacts of the natural dentition for durability of teeth, mandibular stabilization, and restorative dentistry is well known. The purpose of this study is to analyze the occlusal contact and guidance pattern of Koreans by evaluating the static occlusion on maximal intercuspal position and measuring dynamic occlusion during straight protrusion. Materials and methods: The occlusal contacts at maximal interincisal position and the occlusal guidance pattern during straight protrusion of 29 subjects were recorded with shimstock foil (Whaledent, Langenau, Germany), T-Scan III (Tekscan Inc., Boston, MA, USA), polyvinylsiloxane registration material (Genie Bite, Sultan Healthcare, Hackensack, NJ, USA) and compared. Occlusal registration procedures were repeated 3 times. The position was fixed to an upright position and the head position was fixed with the Frankfurt horizontal plane paralleling the horizontal plane. Fisher's Exact Test (R-General Public License, ver. 2.14.1) and Pearson's Test were used to assess the significance level of the differences between the experimental groups (${\alpha}=.05$). Results: When using shimstock foil, T-Scan III system, and polyvinylsiloxane registration material, most of the patients showed contact on anterior, premolar, and molar teeth during maximal intercuspal position. Approximately 51% of maximal intercuspal position showed anterior contact using shimstock foil. When examining the protrusive movement using shimstock foil and T-Scan III system, guidance pattern with the central incisor was the most common. Conclusion: During maximal intercuspal position, there were cases in which not all of the teeth showed occlusal contact. During mandibular protrusive movements, one or more maxillary central incisors frequently joined in straight protrusion and the posterior teeth were disoccluded. Therefore, the anterior teeth protect the posterior teeth, and vice versa. Thus, mutually protected occlusion should be applied when reconstructing occlusion.

• The korean journal of orthodontics
• /
• v.26 no.3
• /
• pp.225-239
• /
• 1996

This study was carried out as a part of the semi-longitudinal study on growth and development of Korean children, with purpose of observing the growth change in arch form., 736 pairs, of study models were taken for 3 years. Mesio-distal diameter of each tooth, intercanine width, intermolar width, canine arch depth, molar arch depth and arch perimeters were measured. Afterwards, mean value and each standard deviation of each age group and each gender were obtained, and corresponding graphs were drawn. The following conclusions were obtained : 1. Mesio-distal diameters of maxillary central incisor, maxillary 2nd molar, mandibular canine, and mandibular 2nd molar showed statistical difierences between boys and girls. 2. Intercanine width shows a gradual increase until age of 11. 3. Intermolar width in maxilla shows continuous increase, and the tendency of increase is more apparent between age of 9 and 14. In mandible, various pattern was shown until age of 9, and after, a slight increase. 4. Canine arch depth shows the increasing tendency until age of 13 in maxilla and 11 in mandible. 5. Molar arch depth shows the pattern of increase until age of 10 in male and 9 in female, which is more apparent in maxilla. After age of 9 or 10,dereasing pattrn was significantly shown until age of 15 in maxilla and age of 12 in mandible. 6. Arch perimeters in maxilla and mandible showed gradual increase until age of 10, and the tendency of increase was more apparent in maxilla; however, between the age of 10 and 14, arch perimeters of maxilla and mandible showed gradual decrease which was more apparent in mandible.