• Journal of Dental Rehabilitation and Applied Science
• /
• v.17 no.3
• /
• pp.205-211
• /
• 2001

The aim of this investigation was to evaluate successfully functioning implants stability in the partially edentulous mandibular molar sites by resonance frequency measurements. Resonance frequency measurement is more objective and clinically non-invasive method than any other methods had been used. In this study, $Osstell^{TM}$ (Integration Diagnostics, Sweden) was used. 15 patients ( 7 males, 8 females ) were received each 2 implants in their mandibular unilaterally partial edentulous molar sites. Total 30 implants were installed, 28 implants were $Br{\aa}nemark^{(R)}$ self-tapping fixtures(MK II, Nobel Biocare, Sweden) and 2 were $3i^{(R)}$(USA) self-tapping fixtures. Minimum of functional loading durations was 12 months and there were no significant marginal bone resorptions and peri-implant problems. From this test, the following results were drawn: 1. Mean ISQ values of implants in the first and second mandibular molar area were $73.66{\pm}4.45$, $71.93{\pm}3.41$, respectively. There was no significant difference between two groups(p>0.05). Also mean ISQ value of total sum was 72.8. 2. Mean ISQ values of implants in males and females group were $71.64{\pm}4.06$, $73.81{\pm}3.76$, respectively. And there was no significant difference between two group(p>0.05). 3. Correlation between implant lengths and ISQ values was weak(r=0.128).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.2
• /
• pp.97-104
• /
• 2003

It is clinically important to determine the physiologic mandibular position as the therapeutic position of the patients who needs the oral rehabilitation and occlusal treatment. Several methods have been employed for the recording the mandibular position. The gothic arch tracer is one of methods to record the mandibular position. The purpose of this study is to record the border position, chewing position, and myocentric position using the newly developed intra oral tracer in 10 subjects with TMJ clicking sound and 10 subjects without TMJ clinking sound.. This study showed that newly developed intra oral tracer allowed clinician the determination of the treatment position on the same horizontal plate which can be used in the full mouth rehabilitation and occlusal treatments. There was no statistically significant difference between clicking group and nonclicking group in the distance of border position-chewing position and the distance of border position-myocentric centric position.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.359-365
• /
• 2015

Long-term use of ill-fitting dentures may cause irregular movements of the mandible. In such cases, satisfactory outcomes both in terms of function and esthetics could be achieved by accurate registration of mandibular movement and centric relation when fabricating new dentures. In this case, treatment dentures with flat occlusal tables were used to register centric relation and mandibular movements of a patient with erratic mandibular movements.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.4
• /
• pp.324-328
• /
• 2014

Aberrant anatomy of mandibular premolars is very rare in Korean, but aberration can contribute the endodontic failure as it makes difficult to remove the irritants during cleaning and shaping procedure. This case report describes the successful root canal treatment of a rare mandibular first premolar with C-shaped root canal as using a cone-beam computed tomography to understand the internal shape of root canal system and a dental operating microscope to improve the magnification and illumination.

• Journal of Technologic Dentistry
• /
• v.11 no.1
• /
• pp.65-70
• /
• 1989

The development of the lobe pattern in the human dentition plays a part in the form and function of each individual teeth. In order to determin the morphological categories used to describe the occlusal surfaces of the maxillary and mandibular molars, the variation of the developmental grooves which separate each lobe in the molars was examined and analysed. The obtained conclusions were as follow. 1. Most of the maxillary first molars with more distinct and more developmental grooves than the other molars but in most cases of the third molar, a heart-shaped outline due to poorly developed or abscent distolingual cusp was most frequent and in this case the third molar had the 3 cusps separated by the central developmental groove and the buccal developmental groove. 2. In most cases, the mandibular first molar had the 5-cusp type that the groove patter resembles a Y, the second molar the 4-cusp type arranged in such a way that the buccal and lingual developmental grooves meet the central developmental groove at right angle on the occlusal surface and many instances of the mandibular third molars had the 5-cusp thpe with a+groove pattern which separatess the mesiolingual cusp from the distobuccal cusp and the 4-cusp type with a+groove pattern. 3. The maxillary and mandibular third molar were most variable in the developmental groove.

• The Journal of Advanced Prosthodontics
• /
• v.16 no.4
• /
• pp.221-230
• /
• 2024

PURPOSE. This in vitro study was conducted to investigate the accuracy of intraoral scanner (IOS) for recording maximal intercuspal position (MIP) and border positions of the mandible. MATERIALS AND METHODS. Maxillary and mandibular master casts were articulated in MIP, protrusive, and lateral interocclusal position sequentially on a semi-adjustable articulator. For each articulation relation, sites of occlusal contacts (SOCs) and sites of clearance (SCs) were identified on the master casts with articulating paper (reference sites). IOS was used to take full arch scans and nine virtual interocclusal records (VIRs) for virtual articulation of models. Virtual SOCs and SCs were detected with 3D processing software and compared to those identified with the articulating paper. Sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) were calculated for each articulation relation. RESULTS. For MIP, IOS showed adequate sensitivity and NPV of 100%, and specificity and a PPV of 99%. For protrusive position, the IOS showed a sensitivity and a NPV of 100%, a high PPV of 86%, and a specificity of 83%. For lateral positions, the specificity and the PPV were high (93% and 79%, respectively), but the sensitivity and the NPV were below the clinically acceptable limits (28% and 56%, respectively). CONCLUSION. IOS displayed clinically acceptable accuracy for recording MIP and protrusive border mandibular position. However, IOS had less accuracy for lateral border mandibular position.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.4
• /
• pp.565-579
• /
• 1993

This study was accomplished to analyse and compare the occlusal contact patterns during eccentric mandibular movements in adult with normal occlusion. 50 subjects(male 27, female 23), who had natural occlusion and no symptom of temporomandibular disorder, were selected. Teeth contact patterns during mandibular eccentric movements were recorded and the distribution of tooth contacts in maximum intercuspation analysed by T-scan system. And then, tooth contact numbers recored by T-scan and silicone bite registration at centric occlusion were analysed and compared. The results obtained were as follows : 1. Antero-posteriorly, the qualitative center of occlusal contacts in centric occlusion were in the first molar areas, but there was a slight deviation in left-right directions. Thus, distribution of occlusal contacts were not bilaterally symmetric. 2. During the mandibular movements from centric occlusal position to right lateral and left lateral directions, the frequency that maxillary canine joined in lateral guidance was relatively high, but pure canine protected occlusion or pure group function occlusion had small frequency. 3. During mandibular protrusive movement, one or more maxillary central incisors frequently joined in protrusive guidance. 4. During mandibular eccentric movements, working and balancing side premature contact was observered in relatively high frequency. 5. In centric occlusal position, the numbers of occlusal contacts recorded on T-scan were relatively smaller than on silicone bite registration.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.3
• /
• pp.242-252
• /
• 2015

Implant overdenture treatment using several solitary attachment systems on mandibular edentulous patients. Most patients with severe residual ridge resorption report significantly more problems adapting to their mandibular denture due to a lack of comfort, retention, stability and to the inability to chew and eat. Recent scientific studies carried out over the past decade have determined that the benefits of a mandibular implant overdenture are sufficient to get retention and stability. Therefore, overdenture with implants on the mandible and attachments are considered as a treatment of choice as a favorable treatment. In this cases, with consideration for jaw relation, level of bone loss, facial support and economic factor, edentulous patients with severe residual ridge resorption are rehabilitated by complete denture on maxilla and two-implants overdenture using several solitary attachment systems on mandible.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.1
• /
• pp.88-94
• /
• 1991

Maxillofacial deformities are not considered to be a trouble in social life but function. So many maxillofacial plastc surgeons has made efforts to overcome these troubles and bring out more positive life. The proper proportion and shape decide esthetic quality. Lower third of face was consist with lip, cheek, mandibular lower border and mandibular angle. Widening lower third of face give a impression with muscular and recklessness. And lower and wide mandibular angle makes face square shape. Unilateral involvement cause asymmestric face. These face is considered unfavorable, especially in Korea or Japan. We prevent a number of with mandibular angle Bulging which was corrected with mandibular osteotomy or masseter myotomy.

• Journal of Oral Medicine and Pain
• /
• v.22 no.1
• /
• pp.167-181
• /
• 1997

The aim of this study was to investigate the relationship between velocity and factors which could affect the velocity of mandibular movement. For this study, 30 dental students without any masticatory signs and symptoms and 90 patients with temporomandibular disorders(TMD) were selected as the control group and the patients group, respectively. After determining Angle's classification and lateral guidance pattern of occlusion, clinical examination for TMD was perfomed. Velocity and distance of mandibular movements were recorded with BioEGN, reproducibility index of lateral excursions was evaluated by Pantronic(PRI) and BioEGN (BERI) activity in masticatory and cervical muscles were measured with BioEMG, and occlusal contact time and cross-arch unbalance(Total left-right statistics, TLR) on clenching were recorded with T-scan, respectively. The results of this study were as follows : 1. Velocity in the patients was faster than that in the controls in most mandibular movements, but on wide opening and closing movement, result was reverse. 2. Velocity on closing movements were faster than that on opening movements in the control group and a similar tendency was also shown in the patients group. 3. Patients with muscle disorders showed a tendency to have the highest value of velocity of all diagnostic subgroups, while patients with degenerative joint diseases showed a tendency to have the lowest value. 4. Patients with canine guidance showed a tendency to have the highest value of velocity in three subgroups by lateral guidance pattern, while patients with group function showed a tendency to have the lowest value. 5. BERI had a positive correlation with opening velocity on lateral excursion, while TLR had a negative correlation with opening velocity on swallowing. 6. EMG activity on clenching in masticatory muscles had negative correlation with opening velocity on border movements, and on swollowing, while the activity in rest correlated positively with opening velocity on border movements. 7. There were positive correlation between the velocity and the distance in long components of mandibular trajectory.