• 제목/요약/키워드: Man-made Features

검색결과 91건 처리시간 0.027초

리버스 옵셋 인쇄에서 PDMS 블랑켓 변형이 인쇄에 미치는 영향에 관한 연구 (Effect of PDMS Blanket Deformation on Printability in Reverse-Offset Printing)

  • 최영만;김광영;조정대;이택민
    • 대한기계학회논문집B
    • /
    • 제38권8호
    • /
    • pp.709-714
    • /
    • 2014
  • 리버스 옵셋 인쇄는 인쇄전자를 위한 미세 패터닝기술 중 하나로서 수 ${\mu}m$ 이하의 선폭을 구현할 수 있다. 옵셋 인쇄의 특성상 잉크는 PDMS 재질의 블랑켓에 전사된 후 음각으로 패턴된 클리쉐에 접촉하여 불필요한 패턴을 제거하게 되는데, 이 때 블랑켓은 압력에 의하여 음각 패턴 내부로 침투하는 변형이 발생한다. 이러한 변형은 인쇄 압력에 비례하며, 과도한 인쇄 압력은 넓은 면적의 패턴을 인쇄할 때 클리쉐 패턴의 바닥에 블랑켓이 닿는 불량을 일으키게 된다. 이 논문에서는 리버스 옵셋 인쇄에서 가압변위에 따른 PDMS 블랑켓의 변형을 유한요소기법을 이용하여 모델링하고 접촉압력 대비 변형량을 예측함으로써 실제 인쇄 장비의 실험 결과와 비교하여 인쇄결함이 발생하지 않도록 하는 클리쉐의 제작조건을 제시하고자 한다.

CROSS-INTERFEROMETRY FOR DEM CONSTRUNTION WITH ERS-ENVISAT PAIR

  • Hong Sang-Hoon;Won Joong-Sun
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
    • /
    • pp.542-545
    • /
    • 2005
  • Spaceborne radar interferometry has been widely used to estimate the topography and deformation of the Earth. It is difficult to obtain coherent interferometric SAR pairs especially over coastal areas mainly because of variation of surface conditions. We carried out the experiment using a cross-interferometric pair with a perpendicular baseline of about 1.4 km, a 30 minutes temporal separation and the height sensitivity of about 6 meters. The temporal decorrelation can be reduced by the cross interferometric technique with a 30 minutes temporal separation. Accurate coregistration was performed through resampling of ENVISAT ASAR data to equivalent pixel spacing to the ERS SAR data, because of the differences of the pulse repetition frequency and range sampling rate between the two sensors. Then we estimated range and azimuth offset to a sub-pixel accuracy using image intensity cross correlation. A larger window chip size than a general case was used because it was difficult to distinguish typical features. As range bin increased, the difference of Doppler centroid also increased. It resulted in lower coherence in far range than in near range. Coherences over wetland in near and far range were about 0.8 and 0.5, respectively. The coherence was improved by applying azimuth and range common band filtering, but coherence gap still existed. ERS-ENVISAT cross-interferogram usually lost information in urban area. However, high coherence over a city in this pair was shown, because of less man-made structures than other major cities. Accuracy of the DEM constructed by the ERS-ENVISAT 30-minute pair in a coastal area is to be evaluated.

  • PDF

제초제(除草劑) 신기능(新機能) 작물품종(作物品種) 이용(利用) 잡초방제(雜草防除) 기술(技術) (Weed Management Using a Potential Allelopathic Crop)

  • 김길웅;박광호
    • 한국잡초학회지
    • /
    • 제17권1호
    • /
    • pp.80-93
    • /
    • 1997
  • Allelopathic compounds as naturally occurring herbicide have originally reported from local vegetation since B.C. 300. These compounds are known as secondary plant metabolites which released from plants into the environment often attract or repel, nourish or poison other organisms. In recent, many natural plant allelochemicals be used to attempt to biologically or ecologically control weed among worldwide weed scientists. Some allelochemicals have also used as fungicides, insecticides, and nematodicides, and were less than man-made agrochemicals to damage the global ecosystem. It makes efficient use of resources internal to the farm, relies on a minimum of purchased inputs. Some scientists selected for allelopathic activity when breeding weed-controlling cultivars of rice, sorghum, cucumber, surflower etc. Thus, this paper is focused on allelopathic compounds isolated from cultivated crop with the high potential of prospective herbicides. The most environmentally acceptable and sustainable approach to utilization of allelopathy for weed control is to develop plant cultivars with proven allelopathic characteristics. In rice accessions, there are 60 cultivars/lines which have known as allelopathic activity and some of these cultivars control weed more less 90% within certain radius of activity. These accessions are originated from 15 countries including Korea, Japan, USA, India, Philippines, Indonesia, Laos, Taiwan, Afghanistan, Mali, Pakistan, Colombia, Egypt, China, and Dom. Rep. From these cultivars, the most common allelopathic compounds identified in rice are p-Hydroxybenzoic, Vanillic, p-Coumaric, and Ferulic acids. In addition, allelopathic lines of the following crop have shown inhibition of weed growth : beet (Beta vulgaris), lupin(Lupinus spp.), com(Zea mays), Wheat(Triticum aestivum), oats(Avena spp.) peas(Pisum sativum), barley(Hordeum vulgare), rye(Secale cereale), and cucumber(Cucumis sativus). Thus, future allelopathy research must be designed its potentially phytotoxic propertices and the ecotoxic features of the allelochemicals from release to degradation ; its ecological sustainability, its allelopathic effect in early growth. stages, and selectivity properties in combination with chemical stages, and selectivity properties in combination with chemical concentrations. Also, research approach in allelopathy might be screened for highly allelopathic germplasm collection of crops, the idea being to ultimately transfer this agronomic character into improved cultivars by either conventional breeding or other genetic transfer techniques.

  • PDF

영상의 차연산과 비연산 기법에 의한 도시지역의 토지피복 변화탐지 (Detecting Land Cover Change in an Urban Area by Image Differencing and Image Ratioing Techniques)

  • 이진덕;조창환
    • 대한공간정보학회지
    • /
    • 제12권2호
    • /
    • pp.43-52
    • /
    • 2004
  • 본 연구에서는 두 가지의 다른 센서에 의하여 획득된 다시기 항공사진과 KOMPSAT-1 EOC 위성영상을 이용하여 급속하게 변화하는 도시지역의 변화를 검출하고자 하였다. 모든 영상에 대한 1, 2차 기하보정을 통하여 좌표계와 축척을 일치시킨 다음, 동일한 조건 하에서 변화를 검출하기 위하여 7m의 공간해상도로 영상을 재배열하였다. 팬크로매틱 항공사진과 KOMPSAT-1 EOC 영상에 대하여 영상의 차연산 기법과 비연산 기법을 각각 적용하여 건물, 구조물, 도로, 기타 인공지물 등 변화를 검출할 수 있었으며, 다른 유형의 센서 영상을 이용한 시계열적 변화탐지의 잠재성을 확인할 수 있었다. 또한 영상의 차연산과 비연산 기법에 의한 변화탐지에 있어서 최적의 임계값을 제시하였다.

  • PDF

Kartagener 증후군 4예 (Four Cases of Kartagener's Syndrome)

  • 이용철;송항용;임석태;김현중;이홍범;이영승;이양근;정재만
    • Tuberculosis and Respiratory Diseases
    • /
    • 제41권6호
    • /
    • pp.663-669
    • /
    • 1994
  • 저자들은 Kartagener 증후군의 전형적인 특징인 내장 좌우역전증, 기관지 확장증 및 부비동염과 함께, 각각 폐암, 성인 호흡장애 증후군등을 동반한 2예를 포함한 4예를 경험하였기에 문헌고찰과 함께 이를 보고하는 바이다.

  • PDF

포스트모던 사회의 패션에 표현된 옵아트 (Op-Art in Fashion of Post-Modern Society)

  • 이민선
    • 복식
    • /
    • 제54권5호
    • /
    • pp.155-166
    • /
    • 2004
  • OP-Art was not appreciated by painters and art critics. and according1y has been forgotten in art history. But recently Op-Art is revitalized in fashion and is in its palmy days. This study intends to re-assess the value of Op-Art, by reviewing its influence on fashion design in the post-modern society To this purpose, conceptual characteristics of Op-Art was analyzed. And then, on the bases of these characteristics, the figural characteristics and the meaning of Op-Art in fashion design of post-modern society was re-explained. Op-Art is characterized as an art of flatness of picture plane which uses repetition of simple forms and colors. It is also based on trick of visual perception. Finally. it creates an impression which is flickering or vibrating by means of optical illusion. These characteristics give birth to some features such as simplicity. anonymity and mobility in the Op-Art fashion. The meanings of Op-Art in fashion design in post-modern society are as follows. First, repetition of simple units employed in Op-Art produces feeling of simplicity. which makes the Op-Art fashion works perceived as polysemy. In other words, the feeling of simplicity can be interpreted In diverse perspectives within the social context of our society. The material civilization and technology civilization, which causes the alienation and standardization of man. can be the backgrounds of the Op-Art fashion. Second, Op-Art is an art based on perspectives of spectators. Anonymity in the Op-Art fashion enhances participation of spectators. which gives Op-Art a sense of affinity. Third, through the feeling of mobility created by optical illusion techniques. the Op-Art fashion expresses the opposition to the ideal body image made by power group. In post-modern society, Op-Art in fashion gives new meaning to art. Op-Art in fashion proposes new roles of artist and spectators, and new concepts of art related with roles of human beings. Through general sensibility of men, Op-art in fashion can express new recognition of the post-modern society.

몽골 울란바토르 복드한산 자연보호지역의 산림훼손지 경년변화 분석 (An analysis of year-to-year change of degraded forest land in Mongolia nature reserve Mt. Bogdkhan in Ulaanbaatar)

  • 간조릭;이준우;권형근;최성민;이명교
    • 농업과학연구
    • /
    • 제41권3호
    • /
    • pp.205-211
    • /
    • 2014
  • Focused on Mt. Bogdkhan nature reserve in Mongolia, this study was conducted as a fundamental research to discover a tendency and characteristics of forest damage and to draw up measures for proper plans of forest restoration through an analysis of year-to year change using satellite images. In specific, land cover mapping was conducted by using Landsat images from 1994 to 2011, and then year-to year change was analyzed to investigate the features of forest damage in Mt. Bogdkhan. The results showed that the whole area of a reservation in Mongolia in 2011 was about $416.89km^2$; among them, forest area was $167,87km^2$, accounting for about 40.3%, followed by bare patch and grassland area (58.6%) and urban dry area (1.1%). In particular, compared in 1994, the area of forest in 2011 has increased by $6.12km^2$; while bare patch and grassland area has decreased by $10.81km^2$. Primary causes of forest degradation occurred in Mt. Bogdkhan nature reserve included illegal logging for fuel, forest and grassland degradation caused by domestic animals grazing, man-made forest fire, and disaster caused by insect pest.

전통 물고기문양을 모티브로 한 창의적 디자인 개발 연구 - 문양의 배치 및 색채 배색 과정을 중심으로 - (A Study on a Creative Design Development Using a Traditional Pattern - Focusing on the Arrangement and Color-scheme of the Pattern -)

  • 목소리;조진숙
    • 한국의상디자인학회지
    • /
    • 제16권2호
    • /
    • pp.81-100
    • /
    • 2014
  • The purpose of this study is to link traditional patterns to mordern clothing. Of all the traditional patterns, the fish pattern was chosen for use during the development of a creative one-piece design for woman and shirts design for man. This study is based upon document searches, including research papers. Through these searches, it investigates the symbolic meaning, formation of the fish pattern and the creative design process. Based on this investigation, the study attempts to modernize the fish pattern and apply the fish patterns to the design of a one-piece dress and shirts. The design procedure includes three sub-processes: selection, arrangement and color-scheme. The selection process, the form of the pattern was edited using Adobe Photoshop. The arrangement of the pattern was made through the checklist conception method, containing the following functions: expand, reset, repeat, omission and dismantling. For the color-scheme of the pattern, Paul Klee(1879-1940)work was selected, and the colors in his work were adopted when dyeing the rest of the one-piece dress and shirts as well as fish features. In conclusion, six designs of the one-pieces dress and shirts were created by using one of Korea's traditional patterns-the fish pattern. This kind of study not only let the world know about the unique beauty of nations but also helps to inspire people who has a profession in design, by suggesting design development process based on design competitiveness improvement factor from fusion of tradition and modern.

  • PDF

3차원 GIS 기법을 이용한 비행안전구역 모형 생성 및 장애 식별 (Flying Safety Area Model Creation and Obstruction Identification using 3D GIS Techniques)

  • 박완용;허준;손홍규;이용웅
    • 대한토목학회논문집
    • /
    • 제26권3D호
    • /
    • pp.511-517
    • /
    • 2006
  • 본 논문은 우리나라 민 군 겸용 비행장의 고도제한의 기준이 되는 군용항공기지법을 중심으로 비행안전구역을 분석하기 위한 방법을 연구하여 개발사업 시행시에 제한 지역을 분석할 수 있는 효과적인 방법을 제시하고 최근 대두되고 있는 비행장 주변지역의 고도제한에 따른 문제 해결에 도움을 주고자 한다. 이를 위해서 지리정보체계(GIS) 기법을 활용하여 항공기 지법에서 규정하고 있는 비행안전구역의 3차원 모형을 효과적으로 생성하기 위한 방법을 제시하고, 비행안전구역 내에서 자연지형 및 인공지물로 인한 장애지역과 대상을 자동으로 식별하기 위한 기법을 제시하였다. 제시한 방법을 실제적으로 적용해보기 위하여 실험지역으로 선정한 비행장에 대하여 상용의 수치지도 자료와 위성영상을 기반으로 지형공간정보를 생성하기 위한 단계적인 방법을 제시하였으며 실험지역 비행장의 비행안전구역 모형을 생성하고, 장애지역과 대상을 식별하여 비행장 비행안전구역 분석을 위한 통합 모형을 가시화함으로써 제시한 방법들의 활용성을 보였다.

Using three-dimensional theory of elasticity for vibration analysis of laminated sectorial plates

  • Liyuan Zhao;Man Wang;Rui Yang;Meng Zhao;Zenghao Song;N. Bohlooli
    • Steel and Composite Structures
    • /
    • 제48권1호
    • /
    • pp.1-17
    • /
    • 2023
  • The main goal of this paper is to study vibration of damaged core laminated sectorial plates with Functionally graded (FG) face sheets based on three-dimensional theory of elasticity. The structures are made of a damaged isotropic core and two external face sheets. These skins are strengthened at the nanoscale level by randomly oriented Carbon nanotubes (CNTs) and are reinforced at the microscale stage by oriented straight fibers. These reinforcing phases are included in a polymer matrix and a three-phase approach based on the Eshelby-Mori-Tanaka scheme and on the Halpin-Tsai approach, which is developed to compute the overall mechanical properties of the composite material. Three complicated equations of motion for the sectorial plates under consideration are semi-analytically solved by using 2-D differential quadrature method. Using the 2-D differential quadrature method in the r- and z-directions, allows one to deal with sandwich annular sector plate with arbitrary thickness distribution of material properties and also to implement the effects of different boundary conditions of the structure efficiently and in an exact manner. The fast rate of convergence and accuracy of the method are investigated through the different solved examples. The sandwich annular sector plate is assumed to be simply supported in the radial edges while any arbitrary boundary conditions are applied to the other two circular edges including simply supported, clamped and free. Several parametric analyses are carried out to investigate the mechanical behavior of these multi-layered structures depending on the damage features, through-the-thickness distribution and boundary conditions.