• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.393-400
• /
• 2014

In this study, an automatic transmission was developed for a bicycle. This transmission uses the pedal rpm and riding speed information for efficient riding. This transmission was installed on a bicycle using an internally geared hub. The automatic transmission was developed for a beginner to ride with proper gear changes. Indoor ride tests were performed to assess the performance of this transmission. Here, a 'beginner' is defined as a bicycle rider who can maintain a riding power of ~150W with a maximum heart rate of ~80%. Furthermore, 'ride with proper gear change' means that the rider could ride the bicycle while maintaining an efficient pedal rpm by the automatic transmission. One expert and four beginners participated in the ride test. The expert was chosen for the comparison with the beginners. To minimize environmental disturbances, the ride test was performed indoors. In this test, two types of gear changes manual and automatic were tested on two types of roads a road with a gradual incline of 0-3% and a road that simulates the bicycle road along the Han river in Seoul. The results of the ride tests show that the algorithm applied for the automatic transmission helps beginners to ride the bicycle efficiently.

• The Korean Journal of Health Service Management
• /
• v.7 no.4
• /
• pp.23-32
• /
• 2013

This study aimed to explore possible relationships between self-efficiency and intention to leave in dental hygienists so as to provide basic data for developing solutions to effectively manage dental hygienist man power. A total of 206 dental hygienists from different dental care institutions in Cheonbuk Province were chosen as subjects by a convenience sampling method. Data were collected through a self-reported survey. The results were as follows. The self-efficiency was higher among dental hygienists who were more than 36 years of age, had graduated university, were at their cuurent job longer than 11 years, and reported their annual income to be more than 25 million won. As their age was younger and their education and income levels were lower, their intention to leave was stronger. Also subjects who were unmarried, did not feel satisfaction with their current job, and did not want to stay any longer at the location where they were currently working tended to have higher intention to leave. The higher their self-efficiency, the lower their turnover intention. An examination of the three factors offered by a factor analysis on self-efficiency, 1) sense of competence, 2) sense of confidence, and 3) strong drive, revealed that the higher their sense of competence, the lower their turnover intention. It was also revealed that their self-efficiency had a significant influence on their turnover intention and the most influential factor was their sense of competence.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.4
• /
• pp.267-273
• /
• 2000

The tooth selectivity of the dredge for catching venus clam (Gomphina melanaegis) was described in which the teeth penetrated the bottom and lifted the shell into the bag. Some factors affecting the selection action of the teeth of the dredge were analyzed related to shell length and shell height. The retention probability of venus clam not sifting through the gaps between the teeth was calculated for various shell lengths and was fitted to two parameter logistic selection curve. The formula obtained is as follows: $P= \frac{1}{1+exp[8.24](\frac{d}{L_1}-0.649)}$, where d is distance between teeth and $L_1$ is a shell length. For biological minimum size(25mm) of venus clam to be catchability 50% the distance between teeth was estimated 16.2mm from the logistic curve. Therefore it is desirable to extend that current spacing between teeth from 12mm to 16mm for the venus clam dredge. That space increasing enables fuel oil of vessel to drag a dredge to be reduced and also man power to sift through sifter smaller venus clams on boards to be reduced.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.5
• /
• pp.55-65
• /
• 2008

The strategic decision makers of the firm have faced with uncertainty and complexity. Although they must make decision under these environments, they can't have enough time, man power, budget and knowledge that they need to decide. They can't, therefore, help getting supports by experts who have implicit knowledge about the domain. But it is difficult for them to find any other procedures and methods to create, transform, combine, and apply new knowledges, whenever decision makers face the problem This paper provides a new method to support a strategic decision making by using the knowledge transformation process suggested by Nonaka. We illustrate an application case of the strategic decision making in consulting industry. This paper uses cognitive map as a decision support technology based on the suggested method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.1
• /
• pp.18-22
• /
• 2014

Residual stresses that occur during the welding process, are the main cause of failure and defects in welded structures. This paper, presents the use of an electronic processing laser speckle interferometer to measure the residual stress of a welded pipe for a nuclear power plant. A tensile testing machine was used to evaluate a welded pipe that failed in compression. The inform plane deformation and modulus of elasticity of the base metal and welds were measured using an interferometer. Varying the load on the welded pipe had a larger effect on the deformation of the base metal the other properties of the base metal and welds. The elastic moduli of the base metal and weld of the welded pipe were 202.46 and 212.14 GPa, respectively, the residual stress was measured to be 6.29 MPa.

• Journal of the Korean Vacuum Society
• /
• v.17 no.3
• /
• pp.199-203
• /
• 2008

The effects of surface treatment by $O_2$ plasma on the Bio-FETs were investigated by using the pseudo-MOSFETs on the SOI substrates. After a surface treatment by $O_2$ plasma with different RF powers, the current-voltage and field effect mobility of pseudo-MOSFETs were measured by applying back gate bias. The subthreshold characteristics of pseudo-MOSFETs were significantly degraded with increase of RF power. Additionally, a forming gas anneal process in 2 % diluted $H_2/N_2$ ambient was developed to recover the plasma process induced surface damages. A considerable improvement of the subthreshold characteristics was achieved by the forming gas anneal. Therefore, it is concluded that the pseudo-MOSFETs are a powerful tool for monitoring the surface treatment of Bio-FETs and the forming gas anneal process is effective for improving the electrical characteristics of Bio-FETs.

• Journal of the Korean Vacuum Society
• /
• v.17 no.3
• /
• pp.204-210
• /
• 2008

ZnO thin films were grown on a glass by RF sputtering system with RF power 100W and oxygen partial pressure of $0%{/sim}30%$. Elliptic constants were measured by using a phase modulated spectroscopic ellipsometer and analyzed with the Tauc-Lorentz dispersion formula and best fit method in the range of 1.5 to 3.8eV. Also, scanning electron microscope(SEM) was used for the analysis of surface crystallization condition. From elliptic constants spectra, optical constants, thickness and roughness of ZnO films were evaluated. Total thickness of ZnO films obtained by ellipsometry showed good agreement with SEM data. It was found that the grain size of the films were getting smaller with increasing oxygen partial pressure. Band-gap of ZnO films increase with the oxygen partial pressure. These findings clearly indicate that optical properties of ZnO films are strongly dependent on the oxygen partial pressure. It could be explained that increasing the oxygen partial pressure induced high crystalline imperfection in the ZnO films.

• The Journal of Korean Society for School & Community Health Education
• /
• v.14 no.3
• /
• pp.1-14
• /
• 2013

Objectives: The purpose of this study was to investigate the possible impact factors(oral health level, oral health promotion behaviors, health level, health behaviors, and mental health) on oral health related quality of life using OHIP-14 of health allied college students. Methods: A total of 363 self-administered questionnaires were collected from university student in Seoul. To investigate the casual relationship between each variable presented in the research model, descriptive statistics, t-test, one-way ANOVA(Scheffe's test), man-whitney, kruskal wallis, multiple regression analysis were carried out by using SPSS ver. 21.0 Results: The study shows that the students reported mean score of OHIP-14 ($8.32{\pm}7.51$), of which physical pain was the highest score($1.88{\pm}1.45$) and social disability was the lowest score($0.69{\pm}1.13$). Multiple regression revealed that the score of OHIP-14 was shown to be significantly higher for the following people: who were get more self-reported symptom of periodontitis, halitosis, negative self-perceived general health and oral health, no received dental scaling treatment, and participants who had no experience awareness of distress in two weeks. The explanatory power was 18.2%. The most powerful factor regarding to self-reported symptom of periodontitis was shown to be negatively relations oral health-related quality of life. Conclusions: In order to enhance the students' life quality, there need to be considered for a comprehensive oral health-related quality of life program for the students through health education policy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.277-277
• /
• 2011

디스플레이의 기술발전에 의해 대면적 고해상도의 LCD가 제작되어 왔다. 이에 따라 LCD 점등검사를 위한 Probe Unit의 기술 또한 급속도로 발전하고 있다. 고해상도에 따라 TFT LCD pad가 미세피치화 되어가고 있으며, panel의 검사를 위한 Probe 또한 30 um 이하의 초미세피치를 요구하고 있다. 따라서, 초미세 pitch의 LCD panel의 점등검사를 위한 Probe Unit의 개발이 시급하가. 본 연구에서는 30 um 이하의 미세피치의 Probe block을 위한 Slit wafer의 식각 공정 조건을 연구하였다. Si 공정에서 식각율과 식각깊이에 따른 profile angle의 목표를 설정하고, 식각조건에 따라 이 두 값의 변화를 관측하였다. 식각실험으로 Si DRIE 장비를 이용하여, chamber 압력, cycle time, gas flow, Oxygen의 조건에 따라 각각의 단면 및 표면을 SEM 관측을 통해 최적의 식각 조건을 찾고자 하였다. 식각율은 5um/min 이상, profile angle은 $90{\pm}1^{\circ}$의 값을 목표로 하였다. 이 때 최적의 식각조건은 Etching : SF6 400 sccm, 10.4 sec, passivation : C4F8 400 sccm, 4 sec의 조건이었으며, 식각공정의 Coil power는 2,600 W이었다. 이러한 조건의 공정으로 6 inch Si wafer에 공정한 결과 균일한 식각율 및 profile angle 값을 보였으며, oxygen gas를 미량 유입함으로써 식각율이 균일해짐을 알 수 있었다. 결론적으로 최적의 Slit wafer 식각 조건을 확립함으로써 Probe Unit을 위한 Pin 삽입공정 또한 수율 향상이 기대된다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.4
• /
• pp.309-315
• /
• 2012

Catalytic combustion is generally accepted as one of the environmentally preferred alternatives for heat and power from fossil fuels, as it has the advantage of stable combustion under very lean conditions with such low emissions as UHC, CO, and NOx. In this work, therefore, comparative numerical studies on the catalytic combustion behaviors over Pd-based catalysts have been conducted with the gaseous $CH_4$, $C_2H_6$, and $C_3H_8$. In the following, after introducing the governing equations with 1D channel and Langmuir-Hinshelwood models, numerical investigations on the catalyst performance are conducted by changing such various parameters as inlet temperature, excess air ratio, and space velocity. The numerical results show that outlet temperature and conversion of $C_3H_8$ are highest among others because of its chemical structure and reactivity.