• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.139-147
• /
• 2019

A MANPADS(Man Portable Air Defense System), which tracks infrared energy, is light enough for individuals to carry and can against to a variety of aircraft, making it widely deployed around the world, posing a major threat to aircraft. A flare has been developed as an IRCM(Infrared Countermeasures) that protects the life of friendly aircraft and combatants by deceiving such guided missiles. However, DIRCM, which can overcome the problems of existing IRCM, is being developed mainly in some developed countries, and the need for it has been increasing gradually. This paper modeled first generation IR seeker of AM modulation method, the second generation IR seeker of FM modulation method, and the third generation IR seeker of pulse modulation method among various MANPADS, and modeled the scattering light phenomenon in the seeker when laser beams are investigated in DIRCM. Using this, jamming simulations were performed in various engagement environments of the MANPADS and aircraft equipped with DIRCM, and the miss distance of the guided missiles and aircraft were analyzed. Simulation results show that DIRCM, which irradiates a modulated laser beam with one jamming code, deceives both first, second and third generation MANPADS at 1km and 2km of engagement distance. In particular, the survival rate of aircraft equipped with DIRCM increased when the distance of engagement increased from 1km to 2km, and the survival rate was at least 99% at 2km of engagement distance.

• Korean Journal of Optics and Photonics
• /
• v.30 no.1
• /
• pp.1-7
• /
• 2019

MANPADS (man-portable air defense system) is a counterweapon system against enemy aircraft, tracking the MWIR (mid-wavelength of infrared) signature of the plume. Under foggy conditions, however, multiple scattering phenomenon caused by the particles affects the MWIR transmittance, and the MANPADS detection performance. Therefore, in this study we analyzed the lock-on range of MANPADS with varying fog conditions and plume characteristics. To analyze the optical extinction properties and transmittance in fog, Mie scattering theory and analytic solution of the radiative-transfer equation are utilized. In addition, we used flare signature as an alternative MWIR light source. We confirmed that the lock-on range could be noticeably reduced under conditions of mist, and proportional to the flare temperature.

• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.1
• /
• pp.9-15
• /
• 2019

DIRCM is a device that deception missiles by directing the light source to missile seeker with infra-red laser based turret. The effectiveness of the device is affected by changes of the turret's Field of View (FoV), and also influence of the interference devices determines the effect of the DIRCM's effectiveness. Therefore finding mounting location for DIRCM is critical parameter for the DIRCM's effectiveness. so we applied stiffness review, interference analysis, FoV analysis and simulation analysis method to Multi-purpose helicopter for the find DIRCM location. As a result, in case of 1 DIRCM mounted at helicopters bottom shows 30~40% survivability. case of 2 DIRCM mounted at both side shows 70~80% survivability.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.3
• /
• pp.107-115
• /
• 1998

This paper deals with the study on injection with EPDM(Ethylene propylene dien ter polymer) the gap which narrow, long, and tubular between an ablative composite tube and a steel motor case. Small size motor assembly was designed and manufactured for man-portable air defense propulsion system. Motor assembly is consisted with steel tube, ablative composite tube and insulation rubber. Ablative composite tube was made of carbon/phenolic prepreg by rolling process and insulation rubber was made of EPDM by TPM(Trans-power molding) process. To select the insulation rubber material, we tested ablative insulation property and degradation property at first and we tested fluidity, adhesive property and hardness of EPDM rubber. Finally we designed TPM process to manufacture motor case assembly and the motor case assembly was examined by non-destructive test(X-ray).