• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.801-806
• /
• 2021

Rail corrugation is continuously increasing due to the lack of maintenance regulations for the amount of rail irregularities. Rail corrugation is causing various problems, such as a decrease in ride comfort and an increase in the amount of track maintenance. In this paper, the effect of rail corrugation on the track force was analyzed by measuring the rail irregularities before and after rail grinding and the track measurements (dynamic wheel load, displacement, and acceleration) for the section where the rail corrugation occurred. In addition, it was experimentally proven that the rail grinding performed to reduce the corrugation of the rail was very effective in reducing the additional forces on the track.

• Journal of Appropriate Technology
• /
• v.5 no.1
• /
• pp.8-17
• /
• 2019

Solar pumps, for water lift systems, is becoming popular in rural areas for supplying drinking water in dry seasons when its need is elevated. The development in technology has also made solar pumps readily available and cheap which has increased its demands. So, for scattered settlements having a limited budget for operation and maintenance costs, solar pump is preferred over grid connected electrical pumping systems. This primary objective of the study was to design a solar photovoltaic pumping drinking water supply system for a small health post which is about 45 km east from Kathmandu, the capital city of Nepal. The study also compared and verified the final design with the system's existing design prepared by a development agency. The water source for this study was a confined aquifer 115m below the surface. The water demand was calculated to be 11m³ per day. A 1500 kPa submersible pump attached to a motor was selected and installed. Along with that twelve solar panels, reservoir, transmission main and distribution main was designed. The outcomes conclude solar photovoltaic pumping water supply systems to be cost-effective with an estimated cost of only USD 0.84 million per MLD. Solar pumps require low maintenance and operation costs and its repairs can quickly be done by the local people. The study also shows that solar technology produces no sound, needs no fuel making it environmentally friendly.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.2
• /
• pp.569-574
• /
• 2023

For maintenance of concrete structures, it is necessary to identify and maintain various defects. With the current method, there are problems with efficiency, safety, and reliability when inspecting large-scale social infrastructure, so it is necessary to introduce a new inspection method. Recently, with the development of deep learning technology for images, concrete defect classification research is being actively conducted. However, studies on contamination and spalling other than cracks are limited. In this study, a variety of concrete defect type classification models were developed through transfer learning on a pre-learned deep learning model, factors that reduce accuracy were derived, and future development directions were presented. This is expected to be highly utilized in the field of concrete maintenance in the future.

• Journal of Wind Energy
• /
• v.14 no.3
• /
• pp.25-33
• /
• 2023

In order to secure the safety of increasing offshore activities such as offshore wind farm maintenance and fishing, IMPACT, a mid-term marine weather forecasting system, was established by predicting marine weather up to 7 days in advance. Forecast data from the Korea Hydrographic and Oceanographic Agency (KHOA), which provides the most reliable marine meteorological service in Korea, was used, but wind speed and wave height forecast errors increased as the leading forecast period increased, so improvement of the accuracy of the model results was needed. The Model Output Statistics (MOS) method, a post-correction method using statistical machine learning, was applied to improve the prediction accuracy of wave height, which is an important factor in forecasting the risk of marine activities. Compared with the observed data, the wave height prediction results by the model before correction for 6 to 7 days ahead showed an RMSE of 0.692 m and R of 0.591, and there was a tendency to underestimate high waves. After correction with the MOS technique, RMSE was 0.554 m and R was 0.732, confirming that accuracy was significantly improved.

• International Journal of Advanced Culture Technology
• /
• v.12 no.1
• /
• pp.254-261
• /
• 2024

Among eco-friendly energy, solar energy is one of the renewable energy sources that is developing in the spotlight in many countries. In line with this, the Korean government and local governments are carrying out projects to provide subsidies for the distribution of household solar power, raising the spread of household solar power and awareness. However, due to the lack of research on consumer perception of household solar power, this study investigated the perception of household solar power from 2015 to 2022 by setting the central word as solar power. As a result, 2016 had the highest number of collections, and when the top 50 words for each year were analyzed, it was confirmed that words related to the installation and maintenance of household solar power dominated. And through CONCOR analysis, a total of four were derived: solar energy recognition, renewable and eco-friendly energy recognition, solar government policies, solar companies, and perceptions of households. Through emotional analysis, it was confirmed that 2021 had the most positive data. As a result, consumer perception of household solar power is positive based on what was mentioned above, but research on how to use negative opinions on waste control and installation and maintenance should be conducted.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.4 s.19
• /
• pp.13-19
• /
• 2004

A system for detecting underwater target demands a high operational reliability because of the difficulty of maintenance and repair when the system has a few troubles during long operating period. Therefore, in this paper, we have proposed a signal transport system with a high reliability in an underwater sensor array system composed of magnetic and acoustic sensors. In this system, the nodes for signal transport are connected dually each other with single-hop construction and a magnetic sensor is connected to a couple of neighboring nodes. This enables the output signal to transport from a node to the next node and the next but one node. Also, the signal from a magnetic sensor can be transported to two nodes at the same time. Thus, the system with this construction makes possible to transport sensor data to another node which works normally when a transport node or cable have some faults and will operate normally although it happens some problems in a few signal transport nodes and connection cables.

• Journal of Information Technology Services
• /
• v.10 no.2
• /
• pp.61-74
• /
• 2011

SMEs(Small and Medium-sized Enterprises) have implemented the various IT-based Production Information Systems(PIS) to cope with the highly competitive environment as well as to improve their competitiveness and productivity. For the efficient development of PIS In SMEs, standardizing the system development process is required. Methodology for the development of PIS is especially important for the systematic and efficient implementation to communicate among the SI companies, SMEs, and a supervision agency. TIPA(Korea Technology and Information Promotion Agency for SMEs) has developed PSDM(Production System Development Methodology), and supplies it to the SI companies. The research goal of this paper is to explore the productivity improvement by adopting the PSDM with the cases of SI companies applied PSDM. The results show that such benefits as risk management, productivity improvement, easy system implementation and maintenance are perceived by PSDM Users. This research could be the first case study reveal the effectiveness of PSDM. For further research, the survey could be carried out with more samples.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.2
• /
• pp.448-457
• /
• 2013

The media is an effective means of preventing crime. It can be known to members of the media presiding over the most widely and rapidly. Because of this, the mass media is a good way to prevent such crime. Related to general crime, marine crime will have unique characteristics and about Crimes reported by the media, it is also true. The results of this study are as follows. Firstly, it is required that the more accurate present article must be published and reported. Secondly, for more accurate presentation of measure, there is a need to enhance professional training for reporters. Thirdly, the marine weather report is the most important political purpose of considering marine crime prevention. Forthly, marine crime is likely to be a lack of evidence. Therefore, in order to supplement the lack of evidence maritime security agency should be utilized for a news source.qualification Fifthly, the need for regular inspection of the articles is requested. Sixthly, for judicial control maintenance of the media related laws should be strengthened. Finally, the arbitration institution for media rights should be established under the Korea Ministry of Land Infrastructure and Transport. This is practical action for marine crime prevention.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.1
• /
• pp.22-30
• /
• 2015

In this research, items and contents of SONAR were derived from investigation of OMS/MP of previously-operated submarines and domestic and international references related to weapon system. Such items and contents were established in detail and were categorized into four separate groups after consulting system design experts and specialists in the field of SONAR's operation. Ultimately, based on wartime and peacetime scenario and operation concept of SONAR, RAM values were obtained through various methods using submarine-operating records and maintenance records for the past eleven years.

• Journal of Korean Society for Quality Management
• /
• v.44 no.1
• /
• pp.109-120
• /
• 2016

Purpose: This study developed a method of determining priorities for evaluating and revising defense standards. Methods: The proposed data integration and refinement methods are used to obtain component reliability information and to determine the frequency of component citation based on Pareto analysis. Based on the reliability information and the frequency of cited components, the target components for quality improvement can be determined and improved using various methods, such as engineering changes, special meetings, additional training, and revising the maintenance manual. Results: Based on the proposed process, we identified components that need to be improved in order to enhance the quality and reliability. Conclusion: Our process will improve the quality and reliability of weapon systems. The proposed process can be adopted for various weapon systems to enhance their quality and reliability, and to reduce military spending.