• 산업경영시스템학회지
• /
• 제43권4호
• /
• pp.123-132
• /
• 2020

Currently, there are two types of trainer in Korea : basic and advanced. Both models have been in operation for more than 10 years, and compared to the early stage of operation, reliability has gradually improved and failure rates have also entered a trend of stabilization. Therefore, it is necessary to extend the maintenance period considering economic feasibility. This study investigates the three maintenance period calculation methods: NAVAIR 00-25-403 [17], DOD, U.S. [4], CERL and US Army [3], with intention to extend the maintenance period of the trainer from current 200 hours to 400 hours. In addition, the maintenance period was calculated by the three methods with actual operational data. Common standards and procedures were established to apply operational data to the existing maintenance period calculation methods, the required reliability indicators were derived, and the maintenance periods was calculated based on the results, additionally, a review on the field applicability of the three maintenance cycles was conducted. An on-site interviews were conducted with the calculation results, and 11 out of the 15 items were expected to be extended by 400 hours. It was suggested that the remaining 4 items could be extended to 400 hours by supplementing the inspection method through additional analysis such as functional analysis, inspection content verification, and site connection.

• 산업공학
• /
• 제16권1호
• /
• pp.27-33
• /
• 2003

The maintenance cost in K Steelworks has been continuously increased in proportion to the production cost. However, there seems to be a possibility of reducing cost through the optimization of maintenance actions. The failure types of the equipment in steelworks ate various with different failure cost. Thus the failure rate and cost of each type of failures should be considered simultaneously when the optimum maintenance period is to be determined. It is considered that the equipment undergoes periodic replacement and a specified number of incomplete preventive maintenance actions are performed during a replacement period. Assuming that the time to failure follows a Weibull distribution, the parameters of the failure rate are estimated using the maximum likelihood estimation. The optimal replacement period is determined to minimize the average cost per unit time. As the result of analysis it is suggested that the existing maintenance period for a hot-rolling equipment can be extended significantly.

• 대한산업공학회지
• /
• 제37권4호
• /
• pp.390-399
• /
• 2011

Generally the life-cycle cost of complex systems composed of several sub systems or equipments such as train, aircraft weapon systems is spent much more during operation and maintenance phase than development phase. The maintenance cost for maintaining the availability and extending the life span of systems comprise a large proportion of systems operation cost. The cycle of preventive maintenance affects operation and maintenance cost a lot. In this study we introduce a way minimizing life-cycle cost of systems by calculating more reliable preventive maintenance period than the results of previous study using systems reliability data considered the reliability and failure effect ratio of sub-systems or components. We can solve the preventive maintenance period problem known as NP-Hard as quick as possible by using modified genetic algorithm than using other models introduced in previous study.

• International Journal of Reliability and Applications
• /
• 제18권1호
• /
• pp.9-20
• /
• 2017

In this paper, we consider a renewable repair-replacement warranty strategy with age-dependent minimal repair service and propose an optimal maintenance model during post-warranty period. Such model implements the repair time limit under warranty and follows with a certain form of system maintenance strategy when the warranty expires. The expected cost rate is investigated per unit time during the life period of the system as for the standard for optimality. Based on the cost design defined for each failure of the system, the expected cost rate is derived during the life period of the system, considering that a renewable minimal repair-replacement warranty strategy with the repair time limit is provided to the customer under warranty. When the warranty is finished, the maintenance of the system is the customer's responsibility. The life period of the system is defined and the expected cost rate is developed from the viewpoint of the customer's perspective. We obtain the optimal maintenance strategy during the maintenance period by minimizing such a cost rate after a warranty expires. Numerical examples using field data are shown to exemplify the application of the methodologies proposed in this paper.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.647-652
• /
• 2008

Railway signal system has been more complex, larger and required high reliability. So, maintenance by experience must be changed to optimize maintenance program or introduced systematic method for estabilish new maintenance program. In this paper, we introduced the maintenance period decision method which are Age based method and Block replacement method based on the failure distribution for the equipment. So, we allocated optimum maintenacne period for the railway signal equipment using block replacement method.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1350-1358
• /
• 2008

Recently the study related to life cycle cost analysis of railway structure consisted of a complex is proceeded covering several range, which is considering the methodology of efficiency and rationalization for maintenance and analysing long-time behavior of the structure of looking at standpoint from asset management and safety. But LCCA(life cycle cost analysis) of railway structure was almost impossible as there were not anything datum for maintenance plan, such as maintenance periods related to each of components(painting and corrosion of steel, and cracking of elements, etc)and maintenance proportion, despite of its 100-year history. According, for collecting data related to railway truss bridge, bridge record cards and testing safety papers, and researching question, etc are surveyed and classified for LCC Analysis. Especially, LCC assessment on the side of assets-maintenance considering about initial cost, maintenance cost, and indirect cost is constructed. Maintenance period and complementary measure rate are very important in maintenance. To decide maintenance period, Baysian updating method is applied.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1487-1493
• /
• 2008

Railway vehicle is very important to implement the effective maintenance in proper to prevent any failure during operation period. Many railway authorities are making efforts to maintain the railway vehicle through scientific and systematic procedure. To achieve this, Reliability Centered Maintenance(RCM) is partially applied. The efficiency of RCM has proven and its terminology was familiar with nuclear power, military and chemical plant etc. since the commercial aircraft's industries has introduced the maintenance program based on the target of reliability. The application of RCM on railway vehicle can be utilized with systematic analysis method to select the best effective maintenance period and action to prevent the failures by selecting the equipment affecting the its safety and reliability. This paper is presented that the procedure of adequate and effective maintenance for railway vehicle by comparing among the related standards in example IEC60300-3,11, MIL-STD-2173, and technical documents or papers. In accordance with above result, RCM procedure is proposed to apply effectively for maintenance of railway vehicle. That is, (1) Analysis of data and Calculation of criticality per equipment (2) Selection of equipment to analyze (3) Analysis of failure mode and effect (4) Evaluation of maintenance method and period (5) Optimization of maintenance program through renewal of maintenance method and period.

• 품질경영학회지
• /
• 제15권1호
• /
• pp.76-81
• /
• 1987

Past treatment of the single machine maintenance problem has shown that preventive maintenance may be desirable for equipment for which failures are caused at least partially by wear-out factors. In all previous treatment, however, the size of the maintenance-repair crew has been held constant and the optimal maintenance period has then been determined. This paper suggests a simultaneous solution for the maintenance-repair crew size and the optimal maintenance period. The optimal maintenance period is seen to shift as the size of the maintenance-repair crew varies.

• The Journal of Advanced Prosthodontics
• /
• 제9권3호
• /
• pp.224-231
• /
• 2017

PURPOSE. This study was designed to evaluate the teeth and dental implants during dental maintenance therapy over 3 years in different conditions after periodontal and dental prosthetic treatment. MATERIALS AND METHODS. 166 patients received maintenance therapy. 59 patients were treated with 2% minocycline-HCl ointment as local drug delivery (LDD) (L group) and 107 patients were treated without LDD (NL group). Clinical data was collected in maintenance period for evaluation. Patients were classified into groups depending on the application of LDD with maintenance therapy, the type of dental treatment before maintenance period (Pre-Tx), the frequency (F-MT), and regularity (R-MT) of maintenance therapy. RESULTS. The numbers of lost teeth (N-teeth, P=.003) and newly placed dental implants (N-implants, P=.022) are significantly different according to Pre-Tx. F-MT among patients who received surgical dental treatment before maintenance period showed statistical differences in N-teeth (P=.041), but not in N-implants (P=.564). All of the patients in L group showed high F-MT (F-MT1). In NL group, there were no statistical differences in N-teeth or N-implants according to F-MT or R-MT. In F-MT1 group, application of LDD made N-teeth significantly different from both Pre-Tx groups while no significant difference could be found in N-implant. Independent t-test and one-way ANOVA were selected for statistical analysis. CONCLUSION. The regular maintenance therapy and LDD can be effective for teeth during maintenance period. It is not only pharmacological efficacy in decreasing bacterial species that makes LDD a useful adjunct. Application of LDD also motivates patients to take adequate check-ups in the aspects of both frequency and regularity.

• 대한산업공학회지
• /
• 제15권2호
• /
• pp.87-91
• /
• 1989

A warranty is a contractual obligation incurred by a producer in connection with the sale of a product. The warranty specifies that producer agrees to remedy certain failures in the product sold. There have been many articles dealing with warranties, but they have studied about optimal warranty cost for the warranty period. In this study, an optimal preventive maintenance time interval is computed. The optimal preventive maintenance time interval minimizing warranty cost for the warranty period is discussed. It is assumed that failure rate is increasing and the failure rate after preventive maintenance or corrective maintenance lies between good as new and bad as old.