• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.105-117
• /
• 2003

The purpose of this research aimed at performing the easy design. and also the easy on-the-job application or the maintenance interval determination methodology by presenting the determining model or the optimizing maintenance interval in TBM for the preventive maintenance or facility TBM(time-based maintenance) as the preventive maintenance requires the adequate determination or the maintenance interval. The maintenance interval or TBM shall be applied differently for the each interval such as He patrol inspection, maintenance, overhaul inspection. exchange. And it is based on the composition level of equipment. The already informed theories or interval determination methodology for the patrol inspection. repair. and overhaul inspection are difficult for adopting because or the several restriction problems in applying the maintenance schemes as the theory So, the model for determining the optimizing exchange interval or part, maintenance interval of auxiliary machine, unit equipment etc. was presented to apply in the maintenance easily and appropriately.

• 산업경영시스템학회지
• /
• 제26권2호
• /
• pp.1-8
• /
• 2003

The operation and management of a plant require proper accounting for the constraints coming from reliability requirements as well as from budget and resource considerations. Most of the mathematical methods to decide the inspection time interval for plant maintenance by reliability theory are too complicated to be solved. Moreover, the mathematical and theoretical models are not usually cases in the practical applications. In order to overcome these problems, we propose a new the decision-making method of optimal inspection interval to minimize the maintenance cost by reliability theory and genetic algorithm (GA). The most merit of the proposed method is to decide the inspection interval for a plant machine of which failure rate $\lambda$(t) conforms to any probability distribution. Therefore, this method is more practical. The efficiency of the proposed method is verified by comparing the results obtained by GA-based method with the inspection model haying regular time interval.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.742-743
• /
• 2007

A maintenance plan of power system equipment reduces failure rate caused by equipment's age. To prevent unexpected failure, the maintenance is performed periodically according to the interval time. The more expansive equipment's scale is, the more the maintenance without considering costs sustains a economical loss. Hence, the maintenance's time and the cost must be considered when maintenance which is considering the reliability is implemented. In this paper, optimum maintenance interval is calculated by considering minimum maintenance cost of the equipment with the combined cycle units in Korea power systems.

• 한국안전학회지
• /
• 제38권2호
• /
• pp.104-111
• /
• 2023

Rolling stock maintenance, which focuses on preventive maintenance, is typically implemented considering the potential harm that may be inflicted to passengers in the event of failure. The cost of preventive maintenance throughout the life cycle of a rolling stock is 60%-75% of the initial purchase cost. Therefore, ensuring stability and reducing maintenance costs are essential in terms of economy. In particular, private railroad operators must reduce government support budget by effectively utilizing railroad resources and reducing maintenance costs. Accordingly, this study analyzes the reliability characteristics of components using field data. Moreover, it resolves the problem of determining an economical replacement interval considering the timing of scrapping railroad vehicles. The procedure for determining the optimal replacement interval involves five steps. According to the decision model, the optimal replacement interval for the onboard signal device components of the "A" line train is calculated using field data, such as failure data, preventive maintenance cost, and failure maintenance cost. The field data analysis indicates that the mileage meter is 9 years, which is less than the designed durability of 15 years. Furthermore, a life cycle in which the phase signal has few failures is found to be the same as the actual durability of 15 years.

• 대한산업공학회지
• /
• 제15권2호
• /
• pp.87-91
• /
• 1989

A warranty is a contractual obligation incurred by a producer in connection with the sale of a product. The warranty specifies that producer agrees to remedy certain failures in the product sold. There have been many articles dealing with warranties, but they have studied about optimal warranty cost for the warranty period. In this study, an optimal preventive maintenance time interval is computed. The optimal preventive maintenance time interval minimizing warranty cost for the warranty period is discussed. It is assumed that failure rate is increasing and the failure rate after preventive maintenance or corrective maintenance lies between good as new and bad as old.

• 플랜트 저널
• /
• 제9권4호
• /
• pp.37-42
• /
• 2013

화력발전소와 같은 대규모 플랜트 설비는 복잡하여 고장이 발생할 경우 고장발생 설비, 시기 및 원인을 정확하게 파악하는 것이 쉽지 않기 때문에 무엇보다 고장을 사전에 예방하는 것이 중요하다. 최근 들어 정비업무에 대한 관점과 중요성이 점차 변화해 가고 있고 주기정비 방식에서 벗어나 상태기반 정비방식으로 발전되고 있다. 본 연구에서는 상태정비에 주안점을 두고 신뢰도중심정비 방법을 화력발전소, 특히 석탄취급설비에 적용하여 정비주기를 선정하고자 하였다.

• 한국안전학회지
• /
• 제30권3호
• /
• pp.13-19
• /
• 2015

Railway vehicle equipment goes back again to the state just before when failure by the repair. In repairable system, we are interested in the failure interval. As such, a statistical model of the point process, NHPP power law is often used for the reliability analysis of a repairable system. In order to derive a quantitative reliability value of repairable system, we analyze the failure data of the air brake system of the train line 7. The quantitative value is the failure intensity function that was modified, converted into a cost-rate function. Finally we studied the optimal number and optimal interval in which the costs to a minimum consumption point as cost-rate function. The minimum cost point was 194,613 (won/day) during the total life cycle of the braking system, then the optimal interval were 2,251days and the number of optimal preventive maintenance were 7 times. Additionally, we were compared to the cost of a currently fixed interval(4Y) and the optimum interval then the optimal interval is 3,853(won/day) consuming smaller. In addition, judging from the total life, "fixed interval" is smaller than 1,157 days as "optimal interval".

• International Journal of Reliability and Applications
• /
• 제9권2호
• /
• pp.141-152
• /
• 2008

This paper presents equations, which can be used to evaluate the failure frequency and the failure rate of a two identical component parallel redundant system in which each component can operate in its wear out period, and the failure rate of each component is exponential power distribution. The optimum maintenance interval for a two identical component parallel redundant system can be obtained using these equations. The proposed approach is presented and illustrated using several numerical examples. The optimum maintenance interval for each component in a two identical parallel redundant system will depend on factors such as: failure rate, repair and maintenance times of each component in the parallel redundant systems.

• 대한안전경영과학회지
• /
• 제6권1호
• /
• pp.61-70
• /
• 2004

In this paper, a group replacement policy based on a failure count is analysed. For a group of identical repairable units, a maintenance policy is performed with two phase considerations: a repair interval phase and a waiting interval phase. Each unit undergoes minimal repair at failure during the repair interval. Beyond the interval, no repair is made until a number of failures. The expected cost rate expressions under the policy is derived. A method to obtain the optimal values of decision variables are explored. Numerical examples are given to demonstrate the results.

• 한국철도학회논문집
• /
• 제11권3호
• /
• pp.240-247
• /
• 2008

최근 들어 각 철도 운영기관들은 유지보수 정보 시스템을 구축하여 고장 및 유지보수 데이터를 수집하고 있다. 그 한 예로서 서울특별시도시철도공사(SMRT)에서는 전동차정보시스템(EMU-IS) 을 국내 최초로 개발하여 2000년 8월부터 본격적으로 사용을 시작하였다. 본 논문에서는 SMRT 전동차량 운영으로 EMU-IS에 모아진 운행, 정비, 고장 데이터를 분석하여 신뢰도를 평가하고 유지보수주기를 결정하는 사례를 다루었다. 그 사례로서 도어시스템의 주요 아이템에 대해 신뢰성을 시간 빛 거리 기준으로 평가하고 오버홀 주기를 결정하는 문제를 다루었다.