• Asian Journal of Turfgrass Science
• /
• v.11 no.2
• /
• pp.105-115
• /
• 1997

Responses of 'Penncross' creeping bentgrass turf to various fairway cultural practices are not well-established or supported by research results. This study was initiated to evaluate the effects of irrigation frequency, clipping return or removal, and nitrogen rate on leaf and soil nitrogen con-tent in the 'Penncross' creeping bentgrass (Agrostis palustris Huds.) turf. A 'Penncross' creeping bentgrass turf was established in 1988 on a Sharpsburg silty-clay loam (Typic Argiudoll). The experiment was conducted from 1989 to 1991 under nontraffic conditions. A split-split-plot experimental design was used. Daily or biweekly irrigation, clipping return or removal, and 5, 15, or 25 g N $m-^2$ $yr-^1$ were the main-, sub-, and sub-sub-plot treatments, respectively. Treatments were replicated 3 times in a randomized complete block design. The turf was mowed 4 times weekly at a l3 mm height of cut. Leaf tissue nitrogen content was analyzed twice in 1989 and three times in both 1990 and 1991. Leaf samples were collected from turfgrass plants in the treatment plots, dried immediately at 70˚C for 48 hours, and evaluated for total-N content, using the Kjeldahl method. Concurrently, six soil cores (18mm diam. by 200 mm depth) were collected, air dried, and analyzed for total-N content. Nitrogen analysis on the soil and leaf samples were made in the Soil and Plant Analyical Laboratory, at the University of Nebraska, Lincoln, USA. Data were analyzed as a split-split-plot with analysis of variance (ANOVA), using the General Linear Model procedures of the Statistical Analysis System. The nitrogen content of the leaf tissue is variable in creeping bentgrass fairway turf with clip-ping recycles, nitrogen application rate and time after establishment. Leaf tissue nitrogen content increased with clipping return and nitrogen rate. Plots treated with clipping return had 8% and 5% more nitrogen content in the leaf tissue in 1989 and 1990, respectively, as compared to plots treated with clipping removal. Plots applied with high-N level (25g N $m-^2$ $yr-^1$)had 10%, 17%, and 13% more nitrogen content in leaf tissue in 1989, 1990, and 1991, respectively, when compared with plots applied with low-N level (5g N $m-^2$ $yr-^1$). Overall observations during the study indicated that leaf tissue nitrogen content increased at any nitrogen rate with time after establishment. At the low-N level treatment (5g N $m-^2$ $yr-^1$ ), plots sampled in 1991 had 15% more leaf nitrogen content, as compared to plots sampled in 1989. Similar responses were also found from the high-N level treatment (25g N $m-^2$ $yr-^1$ ).Plots analyzed in 1991 were 18% higher than that of plots analyzed in 1989. No significant treatment effects were observed for soil nitrogen content over the first 3 years after establishment. Strategic management application is necessary for the golf course turf, depending on whether clippings return or not. Different approaches should be addressed to turf fertilization program from a standpoint of clipping recycles. It is recommended that regular analysis of the soil and leaf tissue of golf course turf must be made and fertilization program should be developed through the interpretation of its analytic data result. In golf courses where clippings are recycled, the fertilization program need to be adjusted, being 20% to 30% less nitrogen input over the clipping-removed areas. Key words: Agrostis palustris Huds., 'Penncross' creeping bentgrass fairway, Irrigation frequency, Clipping return, Nitrogen rate, Leaf nitrogen content, Soil nitrogen content.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.5
• /
• pp.766-771
• /
• 1999

The first paper of this series compared the effects of rates and frequencies of application of dairy slurry on herbage yields and stand persistence of orchardgrass (Dactylis glomerata L.), reed canarygrass (Phalaris arundinacea L.), and alfalfa (Medicago sativa L.)-grass mixtures managed as a 4-cutting system. This paper compares the effects of rates and frequencies of application of dairy slurry on herbage yield and stand persistence of alfalfa, orchardgrass, tall fescue (Festuca arundinacea Schreb.), and alfalfa-orchardgrass mixture managed as a 5-cutting system. The results presented here are part of a larger study having a primary objective of comparing alfalfa, various grasses, and alfalfa-grass mixtures for utilizing nutrients from dairy slurry applied to established stands. A randomized complete block design with treatments in a split plot arrangement with four replicates was used. The main plots consisted of 9 fertility treatments: 7 slurry rate and frequency of application treatments, one inorganic fertilizer treatment, and an unfertilized control. The sub-plots were the forage species. Manure used for the study was composed from stored solids scraped from the alleyways of a free-stall dairy barn. Water was added to from a slurry having about 8 % solids. Slurry was pumped from the liquid spreader tank into 10.4 L garden watering cans for manual application to the plots. Herbage yields of alfalfa, tall fescue, and alfalfa-orchardgrass were generally not affected by slurry application rates and were not significantly different from the inorganic fertilizer treatment. Tall fescue significantly outyielded all other forage species at all manure and the inorganic fertilizer treatments in the second year when rainfall during the growing season was unusually high. Grasses generally had a greater response to manure applications than alfalfa and alfalfa-orchardgrass. Increasing rates of manure did not increase herbage yields of alfalfa and alfalfa-orchardgrass. Herbage yields within each species were not affected by frequency of application of the same total rate. Stand ratings of alfalfa, orcahrdgrass and alfalfa-orchardgrass were significantly lower for the very high manure application rate compared to the control treatment. Based upon the results of this study, multiple annual applications of slurry manure can be made onto these species at rates up to $1,700kg\;total\;N\;ha^{-1}\;yr^{-1}$ without detrimental effects on herbage yield and stand persistence.

• Korean Journal of Veterinary Research
• /
• v.38 no.4
• /
• pp.882-897
• /
• 1998

This experiment was conducted to predict the effects of motional characteristics on the fertility of Korean native cattle(KNC) by using CASA technology and in vitro fertilization system. Twenty-six KNC frozen semen straws were obtained from Korean KNC improvement department, livestock improvement main division, national livestock cooperatives federation in Korea. Specimens were allowed to thaw at $37^{\circ}C$ for 30 sec in water bath. Semen analysis was performed on semen image analysis system(SIAS, Medical supply, Korea) adjusted to the gate settings and used the semen droplet ($5{\mu}l$) placed on Makler counting chamber(Sefi medical instrument, Israel) prewarmed at $37^{\circ}C$. The same person used the same micropipette to fill the Makler counting chamber. A total of 150 or more of sperms were analysed in each specimen by a single trained person by scanning at least 5 to 10 fields. The oocytes collection, in vitro maturation, IVF, in vitro culture and determination of the cleavage rate were performed by the technique, as described by Hwang et al (1997). Statistical analysis was done by linear regression with use of the Sigma plot program on a IBM personal computer. The cleavage rate in vitro fertilized oocyte was significantly correlated(P<0.05) with MOT, VCL, VSL, VAP, ALH, BCF and MAD, but not CON, LIN, STR, WOB, DNM, DNC and HYP in regressional analysis. The results show that some kinematic characteristics of frozen-thawed semen by CASA can be predict the fertility in in vitro model system.

• Horticultural Science & Technology
• /
• v.33 no.3
• /
• pp.340-348
• /
• 2015

Mowing turfgrasses, especially fast growing species like perennial ryegrass, is one of the most time and money consuming tasks of their management. Trinexapac-ethyl (TE) is a popular plant growth regulator used to reduce mowing requirements, improve stress tolerance, and enhance turf quality. This study was conducted to investigate the effect of TE rate and frequency of applications on growth response and traffic tolerance of perennial ryegrass. The experiment was a split-plot laid out in a randomized complete block (RCB) design with three replications. TE was applied to main plots at 0.00, 0.25, and $0.50kg\;a.i.\;ha^{-1}$. Application pattern included an initial application, followed by two sequential applications at 6-wk intervals. Traffic treatment was applied to subplots with a cleated roller. Results demonstrated that TE consistently reduced vertical shoot growth, clippings dry weight, with maximum growth reduction of 59% and 65%, for 0.25 and $0.50kg\;a.i.\;ha^{-1}$, respectively, occurring at 2 weeks after initial TE treatment (WAT). Traffic also dramatically reduced vertical shoot growth and clippings dry weight. Overall, quality of perennial ryegrass was enhanced by sequential TE applications, however, turf quality and surface coverage reduced greatly under traffic, regardless of TE treatment. Total chlorophyll, chlorophyll a and chlorophyll b and total carbohydrates (TC) contents were also positively influenced following sequential TE application. Our results indicated that TE reduces mowing frequency and enhances turf quality rather than influencing traffic resistance.

• Particle and aerosol research
• /
• v.7 no.2
• /
• pp.59-68
• /
• 2011

The objective of the study was to investigate the main factors that contribute the variation of $PM_{10}$ concentration of Seoul and to quantify their effects using generalized additive model (GAM). The analysis was performed with 3 year air pollution data (2004~2006) measured at 27 urban sites and 7 roadside sites in Seoul, a background site in Gangwha and a rural site in Pocheon. The diurnal variation of urban $PM_{10}$ concentrations of Seoul showed a typical bimodal pattern with the same peak times as that of roadside, and the maximum difference of $PM_{10}$ level between urban and roadside was about $14{\mu}g/m^{3}$ at 10 in the morning. The wind direction was found to be a major factor that affects $PM_{10}$ level in all investigated areas. The overall $PM_{10}$ level was reduced when air came from east, but background $PM_{10}$ level in Gangwha was rather higher than the urban $PM_{10}$ level in Seoul, indicating that the $PM_{10}$ level in Gangwha is considerably influenced by that in Seoul metropolitan area. When hourly variations of $PM_{10}$ were analyzed using GAM, wind direction and speed explained about 34% of the variance in the model where the variables were added as a 2-dimensional smoothing function. In addition, other variables, such as diurnal variation, difference of concentrations between roadside and urban area, precipitation, month, and the regression slope of a plot of carbon monooxide versus $PM_{10}$, were found to be major explanatory variables, explaining about 64% of total variance of hourly variations of $PM_{10}$ in Seoul.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.2
• /
• pp.107-114
• /
• 2003

Growth characteristics and seed productivities of orchardgrass "Hwabsung 2 Ho" cultivated for seed production were examined in the NLRI from 2000 to 2002. The experimental design was a split-plot arrangement with three replications. The main-plots were three drill widths of 15, 30 and 45cm, and subplots were four nitrogen application levels of 45, 90, 135 and 180kg/ha in early spring. Lodging was less in 45cm of drill width than in 15 and 30cm and was not severe by 90kg per ha of nitrogen including 45cm of drill width. Number of panicles per $1\m^2$ was tended to be more in 15cm of drill width than in 30 or 45cm. Among 45cm of drill widths. 45kg per ha of nitrogen had most numerous panicles. Panicle length, number of 1st branch, weight of 1,000 grain, and germination of 30 or 45cm of drill width showed better characters than that of 15cm. Seed yield was not statistical different among the treatments but was some more in 30cm of drill width, and was tended not to be different among nitrogen levels. Therefore, considering lodging tolerances, seed yield components, and mechanizations, treatment with 45cm of drill width including 45kg per ha of nitrogen in early spring was better than other treatments for orchardgrass seed production.

• The Korean Journal of Applied Statistics
• /
• v.7 no.1
• /
• pp.83-102
• /
• 1994

Some optimal designs and data analysis methods based on a Gaussian spatial linear model for computer simulation experiments are considered. For designs of computer experiments, Latin-hypercube designs and some optimal designs are combined. A two-stage computational (2-points exchange and Newton-type) algorithm for finding the optimal Latin-hypercube design is presented. The spatial prediction model which was discussed by Sacks, Welch, Mitchell and Wynn(1989) for computer experiments, is used for analysis of the simulated data. Moreover, a method of contructing sequential (optimal) Latin-hypercube designs is considered. An application of this approach to the quality improvement and optimization of the integrated circuit design via the main-effects plot and the sequential experimental strategy is presented.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.1
• /
• pp.91-97
• /
• 2011

The objectives of this research were to investigate the system of rice intensification (SRI) on early growth, grain yield, and yield components under Chinese milk vetch residue-mulched no-tillage cropping systems at silt loam soil. The field was prepared as a split-plot design with three replications, main plots consisted of Dongjinbyeo, and Sobibyeo as a cultivar, and subplots consisted of $10{\times}10$ cm, $20{\times}20$ cm, and $30{\times}30$ cm as a planting density. Weed infestation during rice growing season was more severe in wider planting density $30{\times}30$ at 35 days after transplanting (DAT), and $20{\times}20$ cm at 95 DAT in both Sobibyeo and Dongjinbyeo. The maximum plant height was recorded in Sobibyeo compared with Dongjinbyeo, $10{\times}10$ cm and $20{\times}20$ cm planting density compared with $30{\times}30$ cm from 20 DAT until 60 DAT. Among the three planting densities, SPAD values were significantly greater in planting density of $20{\times}20$ cm both in Sobibyeo and Dongjinbyeo followed by $30{\times}30$ cm compared with closer planting density of $10{\times}10$ cm. The lowest grain yield was observed in wider planting density of $30{\times}30$ in both Sobibyeo and Dongjinbyeo due to lower number of panicle per unit area. Our findings suggest that optimum planting density for SRI in no-tillage paddy was $20{\times}20$ cm and it should be useful the systems to small-scale rice farmers in Korea as a sustainable farming system.

• Applied Chemistry for Engineering
• /
• v.28 no.3
• /
• pp.286-289
• /
• 2017

Synthesis of zeolite 4A was carried out to optimize the nanoparticle synthesis process using statistical experimental design method. The zeolite 4A was synthesized by controlling the concentration of the silicon precursor, sodium metasilicate (SMS), and characterized by XRD, SEM and nitrogen adsorption. In particular, the property of zeolite 4A can be determined by XRD analysis. Using the general factor analysis in the design of experiments, we analyzed main effects and interactions according to the reactor, reaction temperature and reaction time. The optimum reaction condition for the synthesis of zeolite 4A crystallinity was using an autoclave for 3 hours at $110^{\circ}C$. Furthermore, the optimal synthesis conditions of zeolite 4A with various crystallinity using Ludox as a silicon precursor were presented of what using both the surface and contour plot.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.7
• /
• pp.929-934
• /
• 2000

Optimum stand density of alfalfa (Medicago sativa L.) varies with locations and climates. Stand density is one of the factors that determines herbage yield, forage quality and persistence of alfalfa. As establishment costs increase, the question arises whether present population densities are optimum for obtaining maximum herbage yield and forage quality. The objectives of this study were: 1) to determine the optimum plant density for highest herbage yield and forage quality for the dehydrated alfalfa industry under Edmontons climatic conditions in Alberta, Canada; 2) to compare herbage yield and forage quality of the cultivars 'Algonquin' and 'Vernal' grown at a range of stand densities. Alfalfa seedlings of both cultivars were either transplanted at spacings of 6, 10, 15 and 25 cm or direct seeded at the 4.5 cm plant spacings, providing population densities of 494, 278, 100, 45 and $16plants/m^2$. The experimental design was a randomized complete block with a split-plot arrangement having three replicates; the main plots consisted of two alfalfa cultivars Algonquin and Vernal, and the sub-plots were the five population densities. The cultivar Vernal had significantly higher annual yield than did the cultivar Algonquin. There was no significant effect of plant density on herbage yield. There was no difference in crude protein (CP) between the two cultivars. At the first cut, there was a significant quadratic effect of plant density on CP content and the greatest CP occurred at the 100 plants/m2 density. Crude protein was not affected by plant density at the second cut. Acid detergent fiber (ADF) and neutral detergent fiber (NDF) were not affected by plant density. The cultivar Algonquin usually had a lower ADF and NDF than cultivar Vernal. In conclusion, high population densities ($278plants/m^2$ or more) of alfalfa did not improve herbage yield and forage quality compared with low plant population densities ($100plants/m^2$ or less) of alfalfa.