• The Journal of the Acoustical Society of Korea
• /
• v.31 no.1
• /
• pp.39-50
• /
• 2012

A voice transformation (VT) method that can make the utterance of a source speaker mimic that of a target speaker is described. Speaker individuality transformation is achieved by altering three feature parameters, which include the LPC cepstrum, pitch period and gain. The main objective of this study involves construction of an optimal sequence of features selected from a target speaker's database, to maximize both the correlation probabilities between the transformed and the source features and the likelihood of the transformed features with respect to the target model. A set of two-pass conversion rules is proposed, where the feature parameters are first selected from a database then the optimal sequence of the feature parameters is then constructed in the second pass. The conversion rules were developed using a statistical approach that employed a maximum likelihood criterion. In constructing an optimal sequence of the features, a hidden Markov model (HMM) was employed to find the most likely combination of the features with respect to the target speaker's model. The effectiveness of the proposed transformation method was evaluated using objective tests and informal listening tests. We confirmed that the proposed method leads to perceptually more preferred results, compared with the conventional methods.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.3
• /
• pp.230-237
• /
• 2012

This paper proposes an active-clamp ac-dc converter with direct power conversion that has a simple structure and achieves high efficiency. The proposed converter is derived by integrating the step-down ac chopper and the output-voltage doubler. The proposed converter provides direct ac-dc conversion and dc output voltage without using any full-bridge diode rectifier. The step-down ac chopper using an active-clamp mechanism serves to clamp the voltage spike across the main switches and provides zero-voltage turn-on switching. The resonant-current path formed by the leakage inductance of the transformer and the resonant capacitor of the output-voltage doubler achieves the zero-current turn-off switching of the output diodes. The operation principle of the converter is analyzed and verified. A 500W prototype is implemented to show the performance of the proposed converter. The prototype provides maximum efficiency of 95.1% at the full load.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.305-309
• /
• 1999

This paper presents an high efficiency energy conversion system for very high-speed flywheel energy storage system using high Tc superconducting bearings. Main configuration of power convertor is designed to replace of the conventional battery with EMB(Electro Mechanical Battery). PMSM(Permanent Magnet Synchronous Motor) using Halbach array is used as the energy conversion system of motor and generator. Some PWM methods for the high frequency inverter is described and the power factor effects to the torque characteristics and efficiency of the motor and generator is analyzed. As the results, it is verified that the inverter output current is well regulated to be in-phase or inverse-phase sinusoidal waveform to have the wide operational range from 2,500rpm to 42,000rpm. Proposed circuit is designed to obtain the very high speed, high efficiency and stable rotational characteristics, and to be applied to1.2r[kW]/65[Wh] system.

• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.14-17
• /
• 2016

This paper describes the implementation of automatic number-braille converter based on image processing for the blind people. The algorithm is consists of four main steps. First step is binary image conversion of the input image obtained by the camera. the second step is segmentation operation by means of dilation and labelling of the character. Next step is calculation of cross-correlation between segmented text image and pre-defined text-pattern image. The final step is generation of brail output which is relevant to input image. The computer simulation result was showing 91.8% correct conversion rate for arabian numbers which is printed in A4-sheet and practical possibility was also confirmed by using implemented automatic number-braille converter based on DSP image processing board.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.141-143
• /
• 2011

Al-SBA-1(Si/Al = 40, 80 and 120) and Al,Mg-SBA-1 (Si/(Al+Mg) = 40 and 80) molecular sieves were synthesized and characterized. Acetalization of n-heptanal with methanol was studied under autogenous pressure between 80 and $150^{\circ}C$. Since protonation of n-heptanal was fast, addition of methanol to the same to formed hemiacetal slowly whereas conversion of hemiacetal to acetal was fast. The catalysts exhibited nearly similar conversion irrespective of their difference in acidity, and all of them showed more than 80 % conversion either at 80 or $100^{\circ}C$. Hence it is evident that the difference in acidity is not so important in differentiating the activity of the catalysts. The large pore size and hydrophilic and hydrophobic properties are suggested to be the main factors that control acetalization.

• International Journal of Automotive Technology
• /
• v.2 no.2
• /
• pp.77-83
• /
• 2001

Effect of ethene on the $DeNO_X$ conversion process in a simulated diesel engine operating conditions was investigated experimentally and theoretically. With the addition of even a small amount of ethene the NO to $NO_2$ conversion enhances greatly. The energy required to convert one NO molecule is 27 eV with 250 ppm ethene added, while 137 eV without ethene at 473 K. The effect of energy density, temperature, and the initial concentrations of ethene and oxygen are also discussed and the results show that the increase of the mentioned parameters lead to the promotion of NO oxidation. A kinetic model used in this study shows good agreement with the experimental result. Byproducts like formaldehyde ($CH_2$ 0) and methyl nitrite ($CH_3$ ONO) predicted by model calculation are broken up into CO and $H_2O$ eventually when high energy is delivered to the gas mixture. Sensitivity analysis shows that the main reactions of NO oxidation when ethene is added we: $HO_2+ NO \arrow NO_2 + OH, RO_2 + NO \arrow NO_2 + RO$, where R is a hydrocarbon radical. Also the direct oxidizing reaction of NO with O cannot be neglected.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.17 no.4
• /
• pp.399-406
• /
• 1997

This research was carried out to investigate the effect of zeranol injection on dry matter(DM) and nutrient intake requirement by growth stage of early castrated bull with 3 treatments(bul1, steer, steer+zeranol) with 28 Holstein bull at National Livestock Research Institute. The main results were as follows: DM intake at growing and fatting stage was the highest in steer groups, that the highest in bull groups at finishing stage and overall mean DM intake was 5% lower at steer+zeranol groups compared to bull and steer, respectively. Net energy intake at finishing stage was the highest as 35.49 Mcal at bull groups, while overall mean net energy intake was 101 - 109% of NRC requirement without significant difference. Concentrate intake to body weight was 1.68- 1.82, 1.91 -2.08 and 1.81 -2.05% at growing, fatting and finishing stage, respectively. Overall mean concentrate intake to body weight at steer groups was 1.94%, which is 1.8 and 1.81% higher compared to bull and steer+zeranol groups, respectively. Feed conversion ratio(DM) during overall period was the worst at steer groups as 9.321g, and also net energy conversion ratio was similar to DM conversion ratio.

• Journal of Korean Institute of Industrial Engineers
• /
• v.14 no.2
• /
• pp.71-80
• /
• 1988

The primary purpose of this study is to develop an automation tool capable of converting the specification of structured analysis into that of structured design. Structured Analysis and Structured Design Language (SASDL) is a computer-aided description language based on ERA model and particulariged by ISLDM/SEM. The automation tool utilizes the specifications of data flow diagram described in SASDL to produce their corresponding SASDL specification of structure chart. The main idea behind the automatic conversion process is to categorize the bubbles in data flow diagram and to determine the positions of the bubbles in structure chart according to their categories and the relative locations in data flow diagram. To make the problem into manageable size, the whole system is broken down into separate parts called activity units. A great deal of manual jobs, such as checking processes leveling, checking data derivation of processes, deriving structure chart from data flow diagram, checking any inconsistency between data flow diagram and structure chart and so forth, can be automated by using SASDL and conversion tool. The specification of structure chart derived by conversion tool may be used in an initial step of design to be refined by SASDL users.

• Journal of Power Electronics
• /
• v.14 no.4
• /
• pp.733-741
• /
• 2014

The integration of photovoltaic (PV) energy sources into DC grid has gained considerable attention because of its enhanced conversion efficiency with reduced number of power conversion stages. During the integration process, a local control unit is normally included with every power conversion stage of the PV source to accomplish the process of maximum power point tracking. A centralized monitoring and supervisory control unit is required for monitoring, power management, and protection of the entire system. Therefore, we propose a field-programmable gate array (FPGA) based centralized control unit that integrates all local controllers with the centralized monitoring unit. The main focus of this study is on the process of integrating many local control units into a single central unit. In this paper, we present design and optimization procedures for the hardware implementation of FPGA architecture. Furthermore, we propose a transient analysis and control design methodology with consideration of the nonlinear characteristics of the PV source. Hardware experiment results verify the efficiency of the central control unit and controller design.

• Journal of Korea Society of Industrial Information Systems
• /
• v.26 no.6
• /
• pp.35-46
• /
• 2021

This study investigates the behavior of users using delivery apps as non-face-to-face lifestyles accelerated due to the 4th industrial revolution era and Covid 19. Specifically, this study examines the effect of customers' perceived service quality on the conversion cost, customer satisfaction, and continuous use intention. Based on the results, the main purpose of this study is to provide useful information and implications for entrants (restaurants) who have signed up and operated and platforms that connect customers, restaurants, and delivery people.