• Journal of Fisheries and Marine Sciences Education
• /
• v.7 no.2
• /
• pp.173-181
• /
• 1995

In this paper, marine casualties occurred in Korean coastal and near-coastal seas, from 1989 to 1993, were analysed. The main results obtained were as follows : 1. According to the numerical component ratio of marine casualties, fishing vessels account for higher portion than other vessels and passenger vessels lower portion. On the other hand, in view of the occurring ratio of that, fishing vessels account for very low rate of accidents and passenger vessels very high rate. 2. Most of marine casualties resulted from the human factors such as careless operation and insufficient engine maintenance, etc. Collision accidents took a majority of all marine accidents in all of vessels, but engine trouble accounted for main cause of accidents in fishing vessels. 3. In view of the results on classifying marine casualties into time zone, great number of accidents took place in dawn, but that of fishing vessels in forenoon. 4. According to the view of the occurring ratio of the injury, the rate was 0.33% in total vessels and 0.18% in fishing vessels. 5. In view of the marine casualties by age and shipboard career, crews with 10~20 years shipboard career raised more marine accidents than others.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.9
• /
• pp.2312-2325
• /
• 2013

In this paper, we propose a preprocessing method that it is to correct the distortion of text area in Korean signboard images as a preprocessing step to improve character recognition. Distorted perspective in recognizing of Korean signboard text may cause of the low recognition rate. The proposed method consists of four main steps and eight sub-steps: main step consists of potential vertical components detection, vertical components detection, text-boundary estimation and distortion correction. First, potential vertical line components detection consists of four steps, including edge detection for each connected component, pixel distance normalization in the edge, dominant-point detection in the edge and removal of horizontal components. Second, vertical line components detection is composed of removal of diagonal components and extraction of vertical line components. Third, the outline estimation step is composed of the left and right boundary line detection. Finally, distortion of the text image is corrected by bilinear transformation based on the estimated outline. We compared the changes in recognition rates of OCR before and after applying the proposed algorithm. The recognition rate of the distortion corrected signboard images is 29.63% and 21.9% higher at the character and the text unit than those of the original images.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.3-9
• /
• 2008

Recently, the plant industries are being activated and plant control systems use various technologies. Because the optimized design for the plants is very important for the reducing of operation and maintenance costs, automatic control systems become more important. Plant control systems consist of the master controller, the plant networks, the programming environment for engineering, monitoring software and the field devices. The control systems should have reliability, availability and safety. Modular architecture of hardware and software makes flexible configuration of the control systems. Each component should have diagnostic functions. It follows industrial standards and makes open systems. Open systems increase accessibility against the data which is distributed in the plants. The controllers including processor and communication modules use the up-to-date technology. They have real time and fault tolerant function by duplicating processors or networks. It also enables to make the distributed control systems. The distributed architecture makes more scalable main control system. Automatic control systems can be operated with better performance. In this paper, we analyzed the requirements of the seawater desalination plants and made some consideration facts for developing the optimized controller. Also we described the design concept of the main controller, which consists of several modules. We should validate and complement the design for the reliability and better performance.

• The Research Journal of the Costume Culture
• /
• v.17 no.2
• /
• pp.343-351
• /
• 2009

As more and more consumers shop online, websites of fashion brands have become effective means for business activities. The Colors of web sites are the most effective visual elements for e-tailers to communicate with consumers. The purpose of this study is to compare websites created for local and global markets by men's apparel brands. The empirical study focused on differences of color application between the local and global websites. Fourteen brands were chosen for the study. The main color, sub color, and accent color were extracted according to the screen component ratios for each website. The colors were analyzed by Munsell's 10 Hues and 12 tone classifications of Practical Color Coordinate System. The Results indicated that all websites were using White as the main color. The local website used pale tones while global websites used dark tones. There was also differences in the use of sub colors and tones. Red was most used as the accent color in both local and global websites.

• Herbal Formula Science
• /
• v.7 no.1
• /
• pp.183-188
• /
• 1999

Though development of diverse and highly value-added commodities in Artemisia Iwayomogi, we can expect such effects as procurement of secure farm's production bases and promotion of consumer's demands. Thus, as a first step for development of funtional foods of Artemisia Iwayomogi, solids yield, physical properties and scopoletin contents which is main component of Artemisia Iwayomogi, were investigated according to extration solvents and temperatures. The main result of this experiment were as following: solid yield in 50% ethanol extracts showed higher than those of water extracts at the same temperature. In condition of 50% ethanol extracts, solid yield, degree of browing and scopoletin contents showed increasing, but turbidities which mean transmittance(%T) showed decreasing sa temperature rise. In water extracts, pH values showed increasing as temperature rise.

• Journal of the Korean Applied Science and Technology
• /
• v.2 no.2
• /
• pp.47-53
• /
• 1985

Correlation among the wax-pigment composites which is base vehicles for the crepas was investigated in terms of fadeness. The base wax synthesized and pigments are compounded with petroleum lubricant and exposed under carbon arc individually. The yellowing phenomenon was appeared on the reference papers coated with the spindle oil which was then exposed. The papers were again extracted with distilled water and pH of them were ranged between 6.2-6.5. Color difference from Adam-Nickerson equation, ${\vartriangle}E$ of base wax is 0.15 and that of spindle oil are varied from 0.66 to 15.62. Since the main components of the petroleum lubricant are aromatic hydrocarbons which have absorptions characteric of UV ranging from 240 to 280 nm, fadeness characteristics of the composites are largely depend upon the change of molecular structure of spindle oil by absorbing UV. Thus the spindle oil having the following physical properties has the better resistance of fadness and is recommended to use in compounding the base wax-pigment composites: ${\cdot}$ main component: paraffinic hydrocarbon ${\cdot}$ pour point: below - $15^{\circ}C$ ${\cdot}$ UV absorption characteristics: ${\lambda}max.$ : 268-290nm ${\cdot}$ absorbancy: below 0.1(0.03ml of sample/50ml of $CHCl_3$)

• Journal of the Korean Ceramic Society
• /
• v.54 no.5
• /
• pp.395-399
• /
• 2017

The thermal properties and crystallization behavior of calcium phosphate glass fabricated using eggshell were examined. Nature eggshell has several impurities in the main component of $CaCO_3$. To manufacture calcium phosphate glass, washed eggshell was dissolved in aqua-regia while adding a solution of isopropyl alcohol, D. I. water and phosphoric acid. The calcined precursor was melted at $1000^{\circ}C$, and the glass ($T_g$ : $540^{\circ}C$) was crystallized at $620{\sim}640^{\circ}C$, which temperature range is relatively low compared to the crystallization temperature of other general types of calcium phosphate glass. The calcium phosphate glass using eggshell was successfully crystallized without any additional nucleating agents due to the multiple effects of impurities such as $Fe_2O_3$, $Al_2O_3$, SrO and $SiO_2$ in the eggshell. The main crystalline phase was ${\beta}-Ca(PO_3)_2$ and a biocompatible material, hydroxyapatite, was also observed. The crystallization process was completed under the condition of a holding time of only 1 h at the low temperature.

• Journal of Information Technology Applications and Management
• /
• v.21 no.2
• /
• pp.31-48
• /
• 2014

The concept of Health Related Quality of Life and its determinants have evolved since the 1980s. Although many researchers have published articles of technology usage in hospitals and the installation of technology based healthcare system, the research about applying the information technology to improve the patients' perceived quality of healthcare services is still limited. In general, services are deeds, processes and performances that are essentially concerns of the consumer. The healthcare service quality depends on tangible factors, such as equipments, facilities, and the quality of hospital staff and also the intangible ones. The main purpose of this work is to establish new model and find out the contribution of information technology to enhance the patients' perceived quality of healthcare service. We attempted to examine the main information technology related factors in 3 aspects, namely quality of information, the technology accessibility and the community that can improve patients' perceived quality of healthcare services. Offline and online questionnaires were used to measure the patients' perceived quality and were distributed to 384 people in 2 countries, Laos and South Korea. A principle component analysis and multiple regressions were used to verify our model. Results show that the use of information technology has partial positive effect on patient-physician interaction in both countries. However, patient knowledge and patient autonomy which are the 2 dimensions of patient-physician interaction has significant positive effect on patients' perceived quality of healthcare service.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.4
• /
• pp.76-83
• /
• 2004

A Propulsion System of the CRW(Canard Rotor Wing) type UAV(Unmanned Aerial Vehicle) was composed of the turbojet engine to generate the propulsive exhaust gas, and the duct system including main and rotary ducts, the nozzle subsystem including main and tip jet nozzle for three flight modes such as lift/landing mode, low speed transition flight mode and high speed forward flight mode. Transient simulation performance utilized the ICV (Inter-component volume) method and simulated using the SIMULINK. Transient performance analysis was performed on 3 cases. Fuel flow schedules to accelerate from Idle to maximum rotational speed were divided into the step increase of the most severe case and ramp increase cases to avoid the overshoot of turbine inlet temperature, and variations of thrust and the turbine inlet temperature were investigated in some transient analysis cases.

• Journal of the Korean Chemical Society
• /
• v.21 no.3
• /
• pp.210-214
• /
• 1977

We have investigated the amino acid composition of gliadin and glutenin from wheat flour Jang Kwang variety and have purified the main gliadin protein by Sephadex column. The results were obtained as follows: 1. Five bands of component for both gliadin and glutenin were found in disc electrophoretic gel column 2. The highest content of amino acid in gliadin and glutenin were glutamic acid and alanine was present in comparatively large amounts in glutenin, whereas proline was rich in gliadin 3. Main gliadin protein was purified by Sephadex G-150 and A-25 column chromatography and identified its purity by disc electrophoresis.