• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1346-1353
• /
• 2007

The simulation analysis of fire-driven flow and passenger evacuation in Daegu subway station, Chung-Ang, have been performed. The first location of outbreak of fire is inside passenger car in the third basement in Chung-Ang station. The smoke flow in the second and third basement has been analyzed using FLUENT 6.2. The CO(carbon monoxide) and temperature distribution in the train units and station platform have been obtained and transferred to input data for evacuation simulation. The highest temperature in the train units was 1500K. For the simulation of passenger evacuation, EXODUS has been used for whole basements (level 1${\sim}$ level 3) in the station. Total number of people was assumed to be one thousand and 640 were placed inside train and 360 were placed outside train. In evacuation simulation, an average of 135 passengers were killed and an average time to evacuate takes 10min 19sec. The main evacuation routes used by passengers were investigated and the cause of death was identified by evacuation simulation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.10
• /
• pp.1044-1048
• /
• 2015

Recently, the viability of the Northern Sea Route has been receiving a remarkable amount of attention. Owing to global warming, glaciers in the Arctic Ocean have been melting rapidly, which has opened up navigation routes for ships with commercial as well as research purposes. At present, vessels can be economically operated along the Northern Sea Route four months of the year. However, studies have shown that the economical operating time may increase to six months by 2020 and year-round by 2030. Even though the conditions of the Northern Sea Route are extreme, the main reason for its use is that the route is shorter than the existing route using the Suez Canal, which provides an economic benefit. In addition, 25% of the world's oil reserves and 30% of its natural gas are stored in the coastal areas of the East Siberian Arctic region. Many factors are leading to the expectation of commercial navigation using the Northern Sea Route in the near future. To satisfy future demand, the International Maritime Organization established the Polar Code in order to ensure navigation safety in polar waters; this is expected to enter into force on January 1, 2017. According to the code, a ship needs to reduce its speed and analyze the ice for safe operation before entering into it. It is necessary to enter an ice field at a right angle to break the ice safely and efficiently. This study examined the operation along the course for safe navigation of the passage under several conditions. The results will provide guidelines for traffic officers who will operate ships in the Arctic Ocean.

• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.869-879
• /
• 1995

TiAi intermetallic compound has been extensively studied for possible high temperature structural applications because of its high specific strength at high temperature, high creep resistance, and good oxidation resistance at elevated temperatures. In addition to its good properties, an economic manufacturing routes should be developed for this material to be used more extensively. One of the promising route in manufacturing TiAl intermetallics is the Self-propagating High-temperature Synthesis (SHS) method. Thus in this study, an attempt was made to study the mechanism of the SHS process in TiAl synthesis. The composition of the sample was Ti-(45, 50, 53)at% Al and the microstuctures of the products were analyzed using optical microscope and scanning electron microscope. When the phases formed at the main SHS reaction of whicyh combustion temperature is higher than the melting temperature of aluminum were identified as TiAl and Ti$_3$Al ; Ti$_3$Al cores surrounded by TiAl phase. In order to increase the combustion temperature, carbon was added 5 and 10at.%. When the carbon content was 10at.%, the heat of the reaction was large enough to melt the phase formed and that is consistent with the theoretical calculation results of the adiabatic temperature. The combution temperatue, which was measured by a computer data acquisition system, increased with the carbon content. The phases formed from the reaction involving the carbon added were indentified as TiAl and Ti$_2$AlC using XRD. The vickers hardness of the reaction product increased with the carbon content.

• Journal of the Korean Society of Combustion
• /
• v.20 no.1
• /
• pp.6-14
• /
• 2015

Numerical study was conducted to clarify effects of added $H_2O$ for the downstream interaction between $H_2$-air and CO-air premixed flames in counterflow configuration. The reaction mechanism adopted was Davis model which had been known to be well in agreement with reliable experimental data. The results showed that both lean and rich flammable limits were reduced in increase of strain rate. The most discernible difference between the two with and without having $H_2O$ and/or $H_2$ addition into $H_2$-air and CO-air premixtures was two flammable islands for the former and one island for the latter at high strain flame conditions. Even a small amount of $H_2$, in which $H_2$-air premixed flame cannot be sustained by itself, participates in CO oxidation, thereby altering the CO-oxidation reaction path from the main reaction route $CO+O_2{\rightarrow}CO_2+O$ with a very long chemical time in CO-air flame to the OH-related reaction routes including $CO+OH{\rightarrow}CO_2+H$ with very short chemical times. This intrinsic nature alters flame stability maps appreciably. The results also showed that chemical effects of added $H_2O$ help lean flames at relatively low strain rate be sustained, and suppress the flame stabilization at high strain rates.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.159-179
• /
• 2006

By using the current road design method that is based on the regulation about structure and facilities standard of the road and the route plan guide of a national road and the alignment optimization road design method which is studied in the inside and outside of country, this study operate the route plan of the sample study and compare and analysis the route character, consequently the current design method has local optimization that is formed the plan by the stage and the section. Alignment optimization road design has the system optimal route search. But cost function has limite that caused by construction parameter that is not included in cost function. So we design a road route included cost function in main fields. As a result, we obtain a realistic and economically road route. The alignment optimization road design model has to be made up some problems, like the change of vertical gradient in the tunnel section, though this defects it has a lot of merits as a geometric design tool, especially in the feasibility study and the scheme design.

• KDI Journal of Economic Policy
• /
• v.42 no.1
• /
• pp.57-95
• /
• 2020

As a case study of an ex-post evaluation of regulations, in this paper I evaluate the 'uniform settlement rate requirement', a regulation that was introduced in 1986 and that was applied to the international telephone market in the U.S. for more than 20 years. In a bilateral market between the U.S. and a foreign country, each U.S. firm and its foreign partner jointly provide international telephone service in both directions, compensating each other for terminating incoming calls to their respective countries. The per-minute compensation amount for providing the termination service, referred to as the settlement rate, is determined by a bargaining process involving the two firms. In principle, each U.S. firm could have a different settlement rate for the same foreign country. In 1986, however, the Federal Communications Commission introduced the Uniform Settlement Rate Requirement (USRR), which required all U.S. firms to pay the same settlement rate to a given foreign country. The USRR significantly affected the relative bargaining positions of the U.S. and foreign firms, thereby changing negotiated settlement rates. This paper identifies two main routes through which the settlement rates are changed by the implementation of the USRR: the Competition-Induced-Incentive Effect and the Most-Favored-Nation Effect. I then empirically evaluate the USRR by estimating a bargaining model and conducting counterfactual experiments aimed at measuring the size of the two effects of the USRR. The experiments show remarkably large impacts due to the USRR. Requiring a uniform settlement rate, for instance, results in an average 32.2 percent increase in the negotiated settlement rates and an overall 13.7 percent ($3.43 billion) decrease in the total surplus in the U.S. These results provide very strong evidence against the implementation of the USRR in the 1990s and early 2000s.

• Korean Institute of Interior Design Journal
• /
• v.15 no.2 s.55
• /
• pp.150-157
• /
• 2006

Founded on a close relationship between exhibition scenarios and media, this study was conducted 1) to establish exhibition arrangement types by using three analytical indicators, such as arrangement types of exhibition, groupings of similar exhibition media, and exhibition density; and 2) to demonstrate the importance of considering the characteristics of exhibition arrangement types by using viewing behavior codes as a major analytical indicator. The following three types were investigated in this research: First, the Independent type (Type C) was found to be strongly influenced by architectural and spatial forms, especially by low exhibition density and high visual information. Also, compared with the Wall Dominant type, low number of viewing behavior codes and distribution was found even though there were high correlations among viewing behavior codes. This is assumed to be due to low exhibition density. Second, the Wall Dominant type (Type A) was found to be not influenced by architectural and spatial forms. This is because space is planned and restructured centering on the wall type showcases. At the planning stage of exhibition, it is easy to divide or combine space according to the contents and structure of exhibition scenarios. Compared with the Independent type, low correlations were found among viewing behavior codes. This is due to low participation or manipulation exhibitions. However, this implies that more active viewing behaviors can be induced if appropriate exhibition techniques and arrangement methods are used for each exhibition content. Third, the Independent Dominant type (Type B) was found to confuse visitors in selecting routes by displaying too many exhibits at a limited space in a disorderly fashion. It failed to attract visitors to the main exhibition area, where a big space is formed in the center. Visitors were found to view exhibits that are arranged near the major traffic line.

• Journal of Environmental Health Sciences
• /
• v.35 no.6
• /
• pp.447-453
• /
• 2009

Cycling has been lately recommended as an alternative commuting mode because it is believed to be good for health and the environment. However, the exposure to environmental pollutants, such as fine particulates, could be a potential problem for cycling in urban environments. In this study, we compared commuters' $PM_{10}$ exposure using the different transportation modes of bicycle and bus. When a bicycle was used as a commuting mode, the additional $PM_{10}$ exposure due to transportation was about 3.5 times higher than that when using a bus. The difference of additional $PM_{10}$ exposures by cycling and bus was statistically significant (p<0.01). The $PM_{10}$ exposure during cycling was significantly correlated with atmospheric $PM_{10}$ concentration (r=0.98, p<0.01) and its correlation coefficient was higher than that of bus (r=0.55, p<0.05). The results of this study demonstrated that the main reasons of higher $PM_{10}$ exposure when using the bicycle as the mode of transport were its vicinity to road traffic and routes that were unavoidably close to road traffic. Bicycle commuting along the road side may not be good for health. Exclusive bicycle lanes away from road traffic are recommended.

• Journal of Environmental Health Sciences
• /
• v.40 no.5
• /
• pp.397-406
• /
• 2014

Objectives: Perchloroethylene (PCE) is a volatile chemical widely used as a solvent in the dry-cleaning and textile processing industries. It was evaluated as Group 2 "probably carcinogenic to humans" by the Integrated Risk Information System (IRIS) of the United State Environmental Protection Agency (U.S. EPA) in 2012. In order to provide a scientific basis for establishing risk management measures for chemicals on the national priority substances list, aggregate risk assessment was conducted for PCE, included in the top-10 substances. Methods: We conducted the investigation and monitoring of PCE exposure (e.g., exposure scenario, detection levels, and exposure factors, etc.) and assessed its multi-media (e.g., outdoor air, indoor air, and ground water) exposure risk with a deterministic and probabilistic approach. Results: In human risk assessment (HRA), the level of human exposure was higher in the younger age group. The exposure level through inhalation at home was the highest among the exposure routes. Outdoor air or uptake of drinking water represented less than 1% of total contributions to PCE exposure. These findings suggested that the level of risk was negligible since the Hazard Index (HI) induced by HRA was below one among all age groups, with a maximum HI value of 0.17 when reasonable maximum exposure was applied. Conclusion: In conclusion, it was suggested that despite low exposure risk, further studies are needed considering main sources, including occupational exposure.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.19-27
• /
• 2007

We have implemented a WWW homepage which finds an optimal route for users. There already exist many web sites which provide the optimal route when a start and a destination cities are given. However, none of them can find the optimal route when a number of cities to be visited. The problem of finding the optimal route starting at a given start city and visiting through all the given intermediate cities and finally returning to the start city is called Travelling Sales Person(TSP) problem. TSP is a well known exponential time complexity problem. We have implemented an artificial intelligent search algorithm for TSP on our homepage. The main feature of our algorithm is that the destination may not be the same as the start city whereas all of the existing heuristic algorithms for TSP assume that the start and the destination cities are the same. The web page asks a user to select all the cities he or she wants to visit(including start and destination city), then it finds a sequence of the cities such that the user would travel minimum distance if he or she visits the cities in the order of the sequence. This paper presents algorithms used in the homepage.