• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.7
• /
• pp.788-792
• /
• 2004

The Electromagnetic properties in BiPbSrCaCuO superconductor was studied. In the measurement of current-voltage characteristics, a voltage across the superconducting sample was observed on applying an external magnetic field. The voltage continues to appear the removal of the magnetic field. The appearance of the voltage is ascribed to the trapping of magnetic flux. Depanding on the direction of appied magnetic flux less than $2.5\times{10}^-5$ T, the voltage in the magnetized sample increases or decreases. It is considered that mechanism of voltage occurrence can be explained by applying filament model.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.756-758
• /
• 2003

In the machine tool industry, direct drive linear motor technology is of increasing interest as a means to achieve high acceleration, and to increase reliability. This paper deals with the characteristics of tubular type linear oscillating actuator with Halbach magnet array. The magnetic field solutions are derived analytically in terms of vector potential, two dimensional cylindrical coordinate system and Maxwell's equations. Motor thrust, flux linkage, back emf are then derived. The results are shown in good conformity with those obtained from the commonly used finite element method. Test results such as thrust measurements are also given to confirm the analysis.

• Journal of Sensor Science and Technology
• /
• v.18 no.3
• /
• pp.197-201
• /
• 2009

This paper studies on the noncontact displacement sensor system to detect the displacement of the cylinder rod. For an inexpensive and a simple process, magnetic scales are printed on the cylinder rod, and magnetized by the specially designed magnetizer that has an yoke through the alternation of N and S pole. Noncontact displacement sensor system consists of cylinder with magnetic scales, Hall sensor, linear guide, controller and display. The system can detect the displacement of moving cylinder with 5 cm/sec in the case of 1 mm magnetic scale. It shows a possibility of position detection of hydraulic cylinder and air cylinder.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.327-329
• /
• 2000

This paper present the characteristic improvements of one-coil coin type vibration Motor. Rotor is consist of coreless coil and 4 segment commutator. Magnet is 4 pole, z direction magnetized. This one-coil coin type vibration motor has simple mechanical structure and good efficiency. So production cost is lower than other having 2 or more coils coin type motor but it has the weak points. That is small vibration magnitude and dead zone. Modifying the shape of rotor, vibration magnitude is increased. To avoid the dead zone we attached more magnetic body on rotor. As result we show the optimal position of magnetic body.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.27-29
• /
• 2001

In this paper, we study in magnetizing the NdFeB magnet which is inserted in a squirrel cage rotor. The inserted NdFeB magnet need much more magnetizing flux than that of ferrite magnet. Also the eddy current flowing in rotor bar disturbs the magnetizer in magnetizing the NdFeB magnet. The existing magnetizing yoke is designed by increasing the coil turn. But we recognize that only by increasing the coil turn it is impossible to make NdFeB magnet magnetized fully. Hence, in this paper we propose the method of increasing magnetizing flux by reducing the rotor bar area.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.131-133
• /
• 2001

2D analysis is impossible for Hybrid stepping motor(HSM) and 3D analysis is necessary because the permanent magnet is magnetized to the axial direction. In this paper, the characteristics of HSM are analyzed by using 3D equivalent magnetic circuit network method(3D EMCNM). In addition, the trapezoidal element is introduced for the exact permeance calculation in the complex shape machinery such as HSM. The magnetic saturation of core is considered.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.29-31
• /
• 2005

The effective flux of X-Y linear motor is calculated with analytical method according to the arrangement of permanent magnet. In order to reduce leakage flux due to increased effective flux, the distance of the permanent magnet is adjusted. When the distance is 2[mm] between two magnets, the leakage flux is greatly reduced, and it is expected that if the segment of permanent magnet magnetized to x and y direction is added, the motor performance will be enhanced.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1029-1031
• /
• 2005

A magnetic position sensor is a apparatus that detect the rotating position by measuring the value of the flux density of the rotating position. In this paper, the magnetization system of the permanent magnet in the magnetic position sensor which detects the rotating position was designed. The permanent magnet was magnetized for the flux density into the hole element to be sinusoidal distribution according to the rotating position. To make the sinusoidal distribution of flux density, the magnetization values according to the position in permanent magnet were varied by adjusting the air gap between the pole of the magnetization fixture and the surface of the permanent magnet.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.411-411
• /
• 2010

Cavity mode Whistler wave를 사용하는 자화유도결합플라즈마 (Magnetized Inductively Coupled Plasma, MICP)의 제반 특성을 비등방성 수송계수를 가지는 Drift-Diffusion 근사, 에너지 보존 방정식 및 유도전자계를 self-consistent 하게 고려하여 계산하였다. 이러한 접근법은 비충돌성 전자가열현상을 고려하지 못하는 단점에도 불구하고, 반도체 장비설계에 필수적인 전자온도, 밀도, 플라즈마 전위, 시스템의 임피던스 특성에 대한 경향성 파악에 매우 유용하다. 뿐만 아니라 전자밀도분포가 공간내에 형성되는 R-wave mode에 미치는 영향을 분석할 수 있다. 직경 320 mm를 가지는 작은 반응기에서 시뮬레이션과 실험결과를 비교하여 본 모델링 방법의 타당성을 검증한 후, 450 mm wafer가공에 적합한 대면적 플라즈마 반응기에서 플라즈마 특성을 연구하였다. 수 mTorr의 공정압력에서 약 10 Gauss전후의 약한 자장이 인가됨으로서 반경방향의 전자밀도 균일성이 대폭 향상되었다. 플라즈마 및 안테나의 대면적화에 수반되는 높은 Q값이 자장의 인가로 큰 폭으로 감소함으로서 임피던스메칭의 안정성이 비약적으로 개선되었고 전력전달 효율 또한 크게 증가함을 알 수 있었다. 본 연구 결과는 차세대 450 mm 반도체 공정장비의 개발에 있어 자화유도결합플라즈마가 매우 유용하게 사용될 수 있음을 보여준다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.11
• /
• pp.1733-1740
• /
• 2004

In the transverse flux linear induction motor(TFLIM) with the general secondary composed of conductor and back-yoke, there exists a magnetized force into the normal direction or the air-gap direction of the thrust motion as well as the thrust force. Therefore, the various methodologies have been tried to use the normal force by the two independent control variables of the multi-phase input. But, as the force depends inevitably and strongly on the thrust force, it is essential to decouple both forces for two control index. In this paper, we suggest a novel approach capable of compensating the couple between both forces and the control index by using the DC-biased multi-phase input, and then realizing the independent control of TFLIM.