• Journal of Surface Science and Engineering
• /
• v.44 no.6
• /
• pp.255-259
• /
• 2011

The thickness dependence of magnetic properties was experimentally investigated in nanocrystalline Fe-Hf-N thin films fabricated by a RF magnetron sputtering method. In order to investigate the thickness effect on their magnetic properties, the films are prepared with different thickness ranges from 90 nm to 330 nm. It was revealed that the coercivity of the thin film increased with film thickness. On the contrary, the saturation magnetization decreased with film thickness. On the basis of the SEM and TEM, an amorphous phase forms during initial growth stage and it changes to crystalline structure after heat treatment at $550^{\circ}C$. Nanocrystalline Fe-Hf-N particles are also generated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.10a
• /
• pp.46-46
• /
• 1988

Structural and magnetic properties of Co-Cr-Mo films were investigated in connection with sputtering conditions. Films were prepared using a convention RF sputtering system. X-ray diffractometry, scanning electron microscopy and transmission electron microscopy were employed to investigate structure properties. Vibrating sample magnetometry was used for coercivity and saturation magnetization measurements. Co-Cr-Mo films displayed reasonable values of perpendicular coercivity and saturation magnetization for perpendicular recording media and showed good perpendicular orientation of the hcp c-axis to the film surface. Perpendicular coercivity was strongly dependent upon substrate technique showed better c-axis orientation than hose using the stationary substrate. Co-Cr-Mo films of 2.9 at. % Mo content showed maximum perpendicular coercivity and saturation magnetization. The films deposited at lower Ar pressure showed good magnetic properties. There was no explicit relationship between the columnar structure and c-axis orientation. Co-Cr-Mo films was found to have suitable structural and magnetic properties for perpendicular recording media.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1993.03a
• /
• pp.86-87
• /
• 1993

• Journal of the Korean Magnetics Society
• /
• v.3 no.2
• /
• pp.87-93
• /
• 1993

Iron nitride (Fe-N) magnetic thin films were deposited using a DC magnetron sputtering system. Microstructures and magnetic properties were examined as a function of deposition power and nitrogen gas input ratio. The nitrogen content in the film was found to be the major factor determining the microstructure and the magnetic properties. The films deposited at low nitrogen input ratios have an $\alpha$-Fe structure of which the lattice is expanded due to the nitrogen atoms incorporated at the interstitial sites. As the nitrogen content in the film increases, the degree of lat-tice expansion increases and the value of saturation magnetization decreases linearly. The films with a high degree of lattice expansion give very low values of coercivity, which is attributed to the disturbance of colunmar growth and the decrease of surface roughness. Further increase in the nitrogen input ratio causes the phase transfonnation from $\alpha$-Fe to $Fe_{2-3}N$, resulting in the marked reduction in the saturation magnetization. The phase transformation occurs when, regardless of deposition conditions, the nitrogen content reaches at 15 at.% and the lattice is expanded by 5%.

• Journal of the Korean Magnetics Society
• /
• v.12 no.2
• /
• pp.51-56
• /
• 2002

Permalloy thin films fabricated by rf magnetron sputtering showed the excellent magnetic properties, i.e., an effective permeability of over 2000 at 1$\mu\textrm{m}$ thick up to 10 MHz, a saturation magnetization of 10∼12 kG, a coercive force of 0.2∼1 Oe, resistivity (p) is 20 ${\mu}$$\Omega$cm. In order to control the magnetic anisotropy direction of the films in a wafer scale, two parallel Nd-Fe-B permenant mangnets were used to provide the magnetic field during the sputtering process. As a result, the anisotropy direction was successfully controlled when the two magnets were seperated with a distance of 70 mm. 3D simmulation of the magnteic fields around the wafer during sputtering were in accord with the above result.

• Korean Journal of Metals and Materials
• /
• v.49 no.6
• /
• pp.505-513
• /
• 2011

A magnetic device which enables the application of a strong and uniform magnetic field to thin film during sputtering was designed for controlling the magnetic anisotropy using a three dimensional finite element method, and the effects of the external magnetic field on the magnetic properties of sputtered thin films were investigated. Both the intensity and the uniformity of the magnetic flux density in the sputter zone (50 mm ${\times}$50 mm) was dependent on not only the shape and size of the magnet device but also the magnitude of stray fields from the magnet. For the magnet device in which the distance between two magnets or two pure iron bars was 80-90 mm, the magnetic flux density along the direction normal to the external magnetic field direction was minimum. The two row magnets increased the magnetic flux density and uniformity along the external magnetic field direction. An Fe thin film sputtered using the optimized magnet device showed a higher remanence ratio than that fabricated under no external magnetic field.

• Journal of Korean Vacuum Science & Technology
• /
• v.2 no.2
• /
• pp.133-138
• /
• 1998

To enhance the ionization level of I-PVD and reduce the coil voltage two approaches were tried and as a diagnostic, optical emission spectroscopy and impedance analysis of the plasma was done with a range of Ar pressures and RF power along with XRD analysis of deposited Ag films. RF sputtering power was pulsed with various on/off time scales to recover the ICP quenched by sputtered metals. This in average enhances the ionization of the sputtered atoms with 10 ms/10 ms and 100 ms/100ms pulse on/off time duration and gives higher (200) preferred orientation over (111) in deposited Ag films. Secondly, Small axial B field about 8G remarkably reduced RF coil sputtering and showed scaled relationship between RF power and magnetic field strength for optimal process condition. From OES of Ar0 and Ar+, wave-like dispersion structure appeared and reduced the coil voltage about 20% at very weak field strength of 8G. This should be studied further to have nay relation with low mode helicon wave launching.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.05a
• /
• pp.38-38
• /
• 1997

In the paper, we investigate the magneto-impedance(MI) effect of the Fe-Co-B Amorphous magnetic film, the amorphous magnetic film having near zero magnetostostriction is fabricated by using the sputtering methode, and then annealed in magnetic field. When the external magnetic field is directly applied to the fabricated film, the voltage amplitude between both side of the magnetic film varies about 22% at 10[MHz] and the impedance varies about 21% at 10[Oe]. Thus, we find that the fabricated magnetic film has the characteristics of high-quality sensor element.

• Journal of the Korean Magnetics Society
• /
• v.8 no.3
• /
• pp.138-143
• /
• 1998

We have investigated the magnetic properties of FeBN and FeSiN films deposited by RF magnetron reactive sputtering system. It was investigated that the compositions of B, Si and N were the main factors influencing the soft magnetic properties and film resistivity. The addition of small amount of N significantly improve the soft magnetic properties and electrical resistivity. The FeBN and FeSiN films were showed good soft magnetic properties which were Hc<1 Oe, Bs:19~19 kG and $\mu$'>1000 values. The composition of films were $Fe_{75}(BN)_{25},\;Fe_{78}(SiN)_{22}$ and resistivity was 100~120 $\mu$$\Omega$-cm. but, futher increase in B, Si and N concentration degraded the soft magnetic properties due to formation of nitride such as $Fe_4N$ compound.

• Journal of the Korean Ceramic Society
• /
• v.32 no.3
• /
• pp.313-320
• /
• 1995

We investigated the preferred orientation, electrical and magnetic properties of the Mn-Zn ferrite thin films deposited on SiO2/Si(100) by ion beam sputtering. The Cu-added Mn-Zn ferrite thin films had a preferred orientation of (111) with a weak orientation, (311). While the Zn-added one had a strong (111) preferred orientation. The saturation magnetization of the Cu- or Zn-doped Mn-Zn ferrite films increased with increasing substrate temperature (Ts) due to the increase of grain size and the enhancement of crystallinity. For the same reason the coercivity of Cu- or Zn-doped Mn-Zn ferrite films deposited at low Ts increased with increasing Ts, but those of the films deposited at high Ts slightly decreased not only because the defect density of the films decreases but because more grains have multi-domains with increasing Ts. The resistivity of Cu- or Zn-added Mn-Zn ferrite thin fims measured by complex impedance method decreased with increasing Ts due to the ehhancement of crystallinity as well as due to the increase of grain size.