• Journal of Magnetics
• /
• 제18권4호
• /
• pp.380-385
• /
• 2013

We find a metastable vortex state of the perpendicular magnetic anisotropy free layer in spin transfer torque magnetic tunneling junctions by using micromagnetic simulations. The metastable vortex state does not exist in a single layer, and it is only found in the trilayer structure with the perpendicular magnetic anisotropy polarizer layer. It is revealed that the physical origin is the non-uniform stray field from the polarizer layer.

• Advances in Computational Design
• /
• 제7권1호
• /
• pp.57-68
• /
• 2022

A simulation study of the distribution of magnetic flux induced by a U-shaped electromagnet into a two-layer massive object with variations in the depth and properties of the surface layer has been carried out. It has been established that the hardened surface layer "pushes" the magnetic flux into the bulk of the magnetized object and the magnetic flux penetration depth monotonically increases with increasing thickness of the hardened layer. A change in the thickness and magnetic properties of the surface layer leads to a redistribution of magnetic fluxes passing between the poles of the electromagnet along with the layer and the bulk of the steel object. In this case, the change in the layer thickness significantly affects the magnitude of the tangential component of the field on the surface of the object in the interpolar space, and the change in the properties of the layer affects the magnitude of the magnetic flux in the magnetic "transducer-object" circuit. This difference in magnetic parameters can be used for selective testing of the surface hardening quality. It has been shown that the hardened layer pushes the magnetic flux into the depth of the magnetized object. The nominal depth of penetration of the flow monotonically increases with an increase in the thickness of the hardened layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.77-80
• /
• 2001

Crystallographic and magnetic characteristics of CoCr-based magnetic thin film for perpendicular magnetic recording media were influenced on preparing conditions. In these, there is that substrate temperature was parameter that increases perpendicular coercivity of CoCrTa magnetic layer using recording layer. While preparation of CoCr-based doublelayer, by optimizing substrate temperature, we expect to increase perpendicular anisotropy of CoCr magnetic layer and prepare ferromagnetic recording layer with a good quality by epitaxial growth. CoCrTa/Si doublelayer showed a good dispersion angle of c-axis orientation $\Delta$$\theta$$_{50}$ caused by inserting amorphous Si underlayer which prepared at underlayer substrate temperature 250C. Perpendicular coercivity was constant, in-plane coercivity was controlled a low value about 2000e. This result implied that Si underlayer could restrain growth of initial layer of CoCrTa thin film, which showed bad magnetic properties effectively without participating magnetization patterns of magnetic layer. In case of CoCrTa/Si that prepared with ultra thin underlayer, crystalline orientation of CoCrTa was improved rather underlayer thickness 1nm, it was expected that amorphous Si layer played a important role in not only underlayer but also seed layer.t also seed layer.r.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.492-495
• /
• 2000

In order to develop an ultra-thin CoCr perpendicular magnetic recording layer, we prepared CoCrTa/Ti double layer for perpendicular magnetic recording media by new facing targets sputtering system, Crystallgraphics and magnetic characteristics of CoCrTa on underlayer substrate temperature have been investigated. Crystallgraphic and magnetic characteristic of thin films were evaluated by X-ray diffractometry(XRD), vibrating sample magnetometer(VSM) and atomic force microscopy(AFM). The coercivity and anisotropy field was increased by increasing under layer substrate temperature, c-axis orientation of CoCrTa magnetic recording layer was improved 8$^{\circ}$ to 5.6$^{\circ}$when under layer substrate temperature was 250[$^{\circ}C$]. Also, through annealing effect for CoCrTa/Ti double layer, it was certain that crystallgraphics and magnetic characteristics was improved.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.550-552
• /
• 2003

We prepared $Co_{77}Cr_{20}Ta_3$ Magnetic layer for perpendicular magnetic recording media with introduce Two-step methode and Amorphous Si Underlayer on slide glass substrate. The thickness of magnetic layer were 100nm, and Underlayer were varied from 5 to 100 nm. The multi layer Properties of crystal structure were examined with XRD. Prepared thin films showed improvement of dispersion angle of c-axis orientation ${\Delta}{\theta}_{50}$ caused by inserting Buffer-layer and amorphous Si underlayer.

• 한국전기전자재료학회논문지
• /
• 제15권3호
• /
• pp.281-286
• /
• 2002

In odder to investigate the magnetic properties of CoCr-based bilayered thin films on kind of underlayer, we introduced amorphous Si layer to Co-Cr(-Ta) magnetic layer as underlayer. First, we prepared CoCr and CoCrTa single layer using the Facing Targets Sputtering system to investigate theirs properties. It was revealed that with increasing the film thickness of CoCr, CoCrTa single layer, crystalline orientation and perpendicular coercivity was improved. The CoCrTa thin film showed bettor crystalline and magnetic characteristics than CoCr thin film. As a result of investigating magnetic properties of CoCr and CoCrTa magnetic layer on introducing the Si underlayer, perpendicular coercivity and saturation magnetization of CoCr/Si and CoCrTa/Si bilayered thin film were decreased due to the increased grain size and diffusion of Si atoms to magnetic layer. And they showed constant with increasing the film thickness of Si thin film. However, in case of CoCrTa/Si bilayered thin film, in-plane coercivity was controlled low at about 250Oe. The c-axis orientations of CoCr/si and CoCrTa/Si bilayered thin film showed a good crystalline characteristics as about $2^{\circ}$.

• 한국자기학회지
• /
• 제11권6호
• /
• pp.262-266
• /
• 2001

본 연구에서는 dc 마그네트론 스터링법으로 CoSm 박막을 제작하여 자기적 성질의 자성층 두께 의존성을 조사하였다. 고밀도 자기기록 매체의 여러 가지 성질 중 자기역전부피는 자기기록 매체에 저장된 정보의 열적 안정성, 자화반전기구 및 잡음을 이해하는 데 매우 중요한 자료가 된다. 따라서 자기화 감쇄의 시간 의존성과 직류 demagnetization remanence 곡선 측정결과로부터 각각 점성계수와 비가역 자화율을 구한 다음 최대 점성계수 및 비가역 자화율을 이용하여 최대 자기역전부피의 두께 의존성을 조사하였다. 자기역전부피와 보자력은 CoSm의 두께가 48 nm와 24 nm에서 각각 최대를 보이다가 오히려 감소하였으나 자기이방성은 계속 증가하는 경향을 보였다. 이와 같은 현상은 자성층의 두께가 증가함에 따라 결정립 또는 nanocrystallites 사이의 자기적 교환 상호작용이 증가하기 때문인 것으로 해석된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.463-465
• /
• 2002

In order to increase perpendicular magnetic anisotropy of magnetic layer and prepare magnetic recording layer with a good quality by epitaxial growth between magnetic layer and, we prepared Co$\_$77/Cr$\_$20/Ta$_3$/Si doublelayer for perpendicular magnetic recording media which was promoted as next generation recording media on slide glass substrate. The thickness of magnetic layer and Underlayer were varied from 20 to 100 nm and 5 to 100 m, respectively. The surface morphology and crystal structure of the CoCrTa/Si film were examined with XRD and AFM. Prepared thin films showed improvement of dispersion angle of c-axis orientation Δ$\theta$$\_$50/ caused by inserting amorphous Si underlayer.

• 한국자기학회지
• /
• 제3권4호
• /
• pp.320-324
• /
• 1993

스퍼터된 자기기록매체 Co-10at%Cr-2at%Mo/Cr 자성박막의 제조조건이 미세구조와 자기적특성에 미치는 영향을 조사하였다. 기판의 온도는 상온-$250^{\circ}C$로 하였으며 Cr하지층과 CoCrMo층의 두께는 각각 $1000-2500\AA$, $300-800\AA$이었다. CoCrMo층의 두께가 $500{\AA}-800{\AA}$ 증가함에 따라 결정립은 미세화 되었으며 균일한 조직을 나타냈다. 보자력은 기판의 온도, CoCrMo자성층, Cr하지층의 두께 를 증가시켰을때 향상되었다. 기판온도가 $250^{\circ}C$, 자성층의 두께가 $700\AA$, Cr 하지층의 두께가 $1000\AA$일때 880 Oe의 보자력을 나타냈다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.68-69
• /
• 2002

Magnetic tunnel junctions은 최근 자기저항용 재료나 MRAM용 소자로 사용하기 위한 연구가 활발하게 진행되고 있다. Magnetic tunnel junction을 저자계, 저전력용 소자로 사용되기 위해서는, 작은 switching field 값과 uniform한 switching field 분포를 가져야 한다. Micromagnetic simulation을 통하여 free layer의 두께와 포화 자화 값이 감소함에 따라서 switching field가 감소함을 알 수 있었다. 본 연구에서는 얇은 free layer를 사용하여 magnetic tunnel junction을 제조하고, 얇은 free layer가 자기저항에 미치는 영향에 대하여 알아보았다. (중략)