• 한국전자통신학회논문지
• /
• 제16권3호
• /
• pp.471-476
• /
• 2021

분말 야금 기술에 의한 복합 연자성 재료는 전기기기에 일반적으로 사용되는 종래의 전기강판보다 많은 장점을 가지고 있으며, 그 관련 기술은 최근에 상당한 발전을 거듭하고 있다. 복합 연자성 재료는 일반적으로 분말의 형태로 인해 자기적 등방성 가지므로 3차원 자속 및 복잡한 구조의 전기기기 구성에 적합하다. 하지만 SMC와 같이 등방성 자기 특성을 가지는 재료는 복잡한 벡터 히스테리시스를 가지므로 정확한 손실 특성을 예측하는 것이 매우 어렵다. 따라서 본 논문에서는 전기강판 및 SMC의 링 타입 시편을 제작하고 시편 크기에 따라 자기적 특성을 측정한 후, 측정된 자기적 정보를 이용하여 800Hz 이상에서 구동하는 고속 영구자석 전동기의 전자계 해석을 수행하였다. 또한, 해당 모델의 시작품을 제작하고 효율 측정 및 비교를 통해 본 논문의 신뢰성을 입증하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.19-19
• /
• 2008

• 한국전자파학회논문지
• /
• 제16권2호
• /
• pp.228-234
• /
• 2005

준 마이크로파 대역용 전자파 노이즈의 흡수체로서 자성 복합 시트를 개발하였다. Fe-Si-Al 자성 분말을 attrition mill을 이용해 편상화한 후 이것을 polymer와 혼합 분산시켜 전자파의 입사 방향에 수직한 방향으로 배향된 자성 복합 시트를 제조하였다. Attrition milling 시간이 긴 편상 분말일수록 제조된 자성 복합체의 유전율은 증가하나 투자율은 다소 감소하는 경향을 보인다. 또한 오랜 시간 milling한 편상 분말일수록 임피던스 정합 주파수는 저주파 쪽으로 이동하나 정합 주파수에서의 전자파 흡수율은 감소한다. 이러한 결과들로부터 복합 자성체의 유전율과 투자율의 주파수 특성을 제어하여 1.4 GHz에서 -8.2 dB의 반사 손실 특성을 갖는 두께 1.0 mm의 노이즈 흡수 시트를 개발하였다.

• Journal of Magnetics
• /
• 제20권4호
• /
• pp.347-352
• /
• 2015

The magnetoelectric (ME) characteristics for Terfenol-D/PZT laminate composite dependence on bias magnetic field is investigated. At low frequency, ME response is determined by the piezomagnetic coefficient $d_{33,m}$ and the elastic compliance $s_{33}^H$ of magnetostrictive material, $d_{33,m}$ and $s_{33}^H$ for Terfenol-D are inherently nonlinear and dependent on $H_{dc}$, leading to the influence of $H_{dc}$ on low-frequency ME voltage coefficient. At resonance, the mechanical quality factor $Q_m$ dependences on $H_{dc}$ results in the differences between the low-frequency and resonant ME voltage coefficient with $H_{dc}$. In terms of ${\Delta}E$ effect, the resonant frequency shift is derived with respect to the bias magnetic field. Considering the nonlinear effect of magnetostrictive material and $Q_m$ dependence on $H_{dc}$c, it predicts the low-frequency and resonant ME voltage coefficients as a function of the dc bias magnetic field. A good agreement between the theoretical results and experimental data is obtained and it is found that ME characteristics dependence on $H_{dc}$ are mainly influenced by the nonlinear effect of magnetostrictive material.

• 한국소음진동공학회논문집
• /
• 제23권9호
• /
• pp.797-805
• /
• 2013

In this paper vibration and stability analysis of laminated composite shells based on the first order shear deformation theory(FSDT) for two different boundary conditions(clamped-clamped, simply supported) are performed. Structural model of cross-ply symmetric laminated composite cylindrical shells subjected to a combination of magnetic and thermal fields is developed via Hamilton's variational principle. These coupled equations of motion are based on the electromagnetic equations(Faraday, Ampere, Ohm, and Lorenz equations)and thermal equations which are involved in constitutive equations. Extended Galerkin method is adopted to obtain the discretized equations of motion. Variations of dynamic characteristics of composite shells with applied magnetic field, temperature gradient, laminate thickness-ratio and radius ratio for two boundary conditions are investigated and pertinent conclusions are derived.

• Journal of Magnetics
• /
• 제11권4호
• /
• pp.164-166
• /
• 2006

We have investigated the dielectric and magnetic properties of ferroelectric-antiferromagnetic $BaTiO_{3}-LaMnO_{3}$ composite with changing relative mole percents. Due to high sintering temperature, i.e. $1150^{\circ}C$, the Ba ion in $BaTiO_{3}$ seems to diffuse into $LaMnO_{3}$; resulting in $BaTiO_{3}-(La,Ba)MnO_{3}$ ferroelectric-ferromagnetic composite. At room temperature, $0.9BaTiO_{3}-0.1LaMnO_{3}$ composite exhibits considerable magnetization (${\sim}0.7\;emu/g\;at\;2000\;Oe$) and low coercive field (${\sim}5\;Oe$). Also it exhibits high dielectric constant (${\sim}560$) and low loss (${\sim}0.08$) at 10 kHz. This result may imply that $BaTiO_{3}-LaMnO_{3}$ could be suitable for a low leakage multiferroic composite.

• 한국군사과학기술학회지
• /
• 제1권1호
• /
• pp.114-127
• /
• 1998

A user friendly computer code(EMCOMST; Electro-Magnetic response for COMposite STructures) was developed which provides with computations of the response characteristics such as reflectance and transmittance to the incident wave angles, frequencies, composite thicknesses, ply orientations, and types of backplate as the linearly polarized transverse electro-magnetic wave is emitted to the advanced composite structures. In this investigation were reviewed the electromagnetic characteristics of the continuous orthotropic fiber-reinforced organic matrix composites with or without ferrite fillers, which are actively applied to low-weight and high-strength aircraft structures. Also were calculated the response of the three layered compound structures which have appropriately stacked above-mentioned materials as transmitting layer, absorbing layer, reflection layer, respectively under the specific thickness constraints for mechanical strength design requirements. For the composite structures presented in this study, minimum reflectance value less than -5㏈ can be obtained in the frequency range of 4 to 12 ㎓. In addition, analysis of structures attached isotropic radar absorbing materials(RAM) is facilitated by putting the material properties in the material input card entries adequately.

• Composites Research
• /
• 제36권5호
• /
• pp.289-296
• /
• 2023

본 논문에서는 밀리미터파 대역 전자파 흡수 소재로 알려진 M형 육방정계 페라이트의 하소 온도에 따른 전자기적 특성과 전자파 흡수 특성에 대해 분석하였다. 용융염 기반 Sol-gel법으로 합성된 M형 페라이트는 850℃ 이상의 하소 온도에서 모두 단상의 M형 결정구조를 가지며 하소 온도가 증가함에 따라 합성된 입자의 크기가 증가하였다. 또한 하소 온도가 증가함에 따라 포화자화는 조금씩 증가하는 반면 보자력은 1050℃에서 최대값을 보이며 그 이상의 하소 온도에서 급격히 감소하였다. M형 페라이트가 70 wt% 포함된 TPU 복합재를 제조한 후 강자성 공명이 발생되는 Q(33-50 GHz) 및 V(50-75 GHz) band 대역에서 복소 유전율/ 투자율을 측정한 결과 약 50 GHz 주파수 대역에서 강자성 공명에 의한 강한 자성손실을 확인하였다. 측정된 결과를 바탕으로 M형 페라이트 복합재의 반사손실을 계산한 결과 1250℃의 온도에서 하소된 M형 페라이트 복합재는 약 0.5 mm의 얇은 두께로도 강자성 공명이 일어나는 52 GHz 주파수 대역에서 -20 dB 이상의 우수한 전자파 흡수 성능을 보였다.

• Journal of Magnetics
• /
• 제3권2호
• /
• pp.64-67
• /
• 1998

Microwave absorbing properties of ferrite-epoxy composite (absorbing layer) attached on the carbon fiber polymer composite (reflective substrate) are analyzed on the basis of wave propagation theory. A modified equation for wave-impedance-matching at the front surface of absorbing layer including the effect of electrical properties of the quasi-conducting substrate is proposed. Based on this analysis, the frequency and layer dimension that produce zero-reflection can be estimated from the intrinsic material properties of the obsorbing layer and the substrate. It is demonstrated that the microwave reflectivity of carbon fiber composite has a strong influence on the microwave absorbance of front magnetic layer.

• 한국전기전자재료학회논문지
• /
• 제27권7호
• /
• pp.462-467
• /
• 2014

In this paper, we studied the magnetic composite sheets for electromagnetic wave noise absorber of quasi-microwave band by using soft magnetic FeSiCr and Fe50Ni flakes with the thickness of about $1{\mu}m$ and polymer. The magnetic hysteresis curve including saturation magnetization and residual magnetization and the complex permeability characteristics of the composite sheets were investigated to clarify the mixing effect on electromagnetic wave absorption properties. The saturation magnetization was decreased about 10% while the residual magnetization was increased about 15% and the real parts of complex permeability at below 500 MHz were increased 0.6~4 while those values at above 500 MHz were decreased 0.4~2.5 according to the change of contents of FeSiCr and Fe50Ni powders. As a result, the reflection loss can be moved to the lower frequency from 2~3 GHz to 1~1.5 GHz as the contents of Fe50Ni flaky powder into FeSiCr flaky powder was increased up to 50%.