• Journal of Animal Environmental Science
• /
• v.12 no.2
• /
• pp.75-84
• /
• 2006

The effects of the mixture ratios of swine manure and food wastes when vermicomposed on earthworm(Eisenia foefida) growth, the production amounts and the chemical properties of casts for plant growth media were evaluated to optimal mixture ratio. Earthworms were grown in swine manure, substituted with 0%, 20%, 40%, 60%, 50% and 100% food wastes. All of earthworm grown in swine manure substituted with 60%, 80%, and 100% food wastes died, therefore the process of swine manure substituted with 60%, 80%, and 100% food wastes by vermicomposting were impossible in this experiment. Worm cast produced from swine manure substituted with 0%, 20% and 40% food wastes after vermicomposting sufficiently contained required quantities of available phosphorus, exchangeable potassium, exchangeable magnesium, and cation exchange capacity. The survival rates of earthworm in swine manure substituted with 0% and 40% food wastes was significantly higher than those in swine manure substituted with 20%, 40% food wastes. Casts weight and proportion of casts weight in 100% swine manure were significantly higher than those in swine manure substituted with 20% food wastes, but was no significant difference between those in swine manure substituted with 40% food wastes. Therefore 100% swine manure was estimated to be superior than the others treatments. However an adequate mixture ratio of food wastes for processing mixture of swine manure by vermicomposting was estimated to be 40%. Because there was no significant difference in mean flesh weight, increasing rate, casts weight, proportion of casts weight, and reduction rate of volatile solids among 3 treatments and survival rate and conversion efficiency(CE) in swine manure with substituted 40% food wastes were significantly higher than the other treatments.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.7
• /
• pp.779-785
• /
• 2015

Cathodic protection is recognized as the most cost-effective and technically appropriate corrosion prevention method for the submerged zone of offshore structures, ships, and deep-sea facilities. When cathodic protection is applied, the cathodic currents cause dissolved oxygen reduction, generating hydroxyl ions near the polarized surface that increase the interfacial pH and result in enhanced carbonate ion concentration and precipitation of an inorganic layer whose principal component is calcium carbonate. Depending on the potential, magnesium hydroxide can also precipitate. This mixed deposit is generally called "calcareous deposit." This layer functions as a barrier against the corrosive environment, leading to a decrease in current demand. Hence, the importance of calcareous deposits for the effective, efficient operation of marine cathodic protection systems is recognized by engineers and scientists concerned with cathodic protection in submerged marine environments. Calcareous deposit formation on a marine structure depends on the potential, current, pH, temperature, pressure, sea-water chemistry, flow, and time; deposit quality is significantly influenced by these factors. This study determines how calcareous deposits form in sea water, and assesses the interrelationship of formation conditions (such as the sea water temperature and surface condition of steel), deposited structure, and properties and the effectiveness of the cathodic protection.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.17 no.2
• /
• pp.316-325
• /
• 2003

In this paper, the effect of Ganopoly(extracts of Ganoderma lucidum) and Ganopoly/C+(70% Ganopoly + 30% chitosan) on cisplastin-induced nephrotoxicity was investigated in Sprague-Dawley rats. A single dose of cisplastin(5 ㎎/㎏) kg) was administered intraperitoneally after pretreatment of saline, Ganopoly and Ganopoly/C+ for 7 days. The nephrotoxicity and renal function were manifestated by the changes of body weight, blood pressure, biochemical changes and solute in urine and plasma. After the treatment of CDDP(cis-dichlorodiamineplatinum), a significant elevation of kidney weight, serum urea, cretinine, urine volume for 24 hours, urine magnesium, and a severe or significant decrease in body weight, blood pressure, creatinine clearance, urine osmolarity, serum albumin, etc. The nephrotoxicity was further confirmed by a significant decrease in glutathione S-transferase(GSH) in urine and kidney homogenate, GSH, glutathione peroxidase(GSH-Px) and catalase in kidney tissue. And also the lipid peroxidation was significantly increased in kidney homogenate. These signs of nephrotoxicity was ameliorated by the pretreatment and consecutive administration of Ganopoly and Ganopoly/C+ for 14 days after the Lp. injection of CDDP on 7th day after pretreatment of Ganopoly and Ganopoly/C+. The amelioration of nephrotoxicity was evidenced by significant reduction in serum urea and creatinine concentration, and improvement of other index of renal function. And The activity of antioxidant enzymes were partially recovered in kidney tissue of rats treated by CDDP and the administration of Ganopoly and Ganopoly/C+. These results indicate the cispastin induced nephrotoxicity is due to an impairment of tubular reabsorption systems enhanced by necrosis of proximal tubule, and the Ganopoly and Ganopoly/C+ has a partial protective effect on nephrotoxicity induced by CDDP. The polysacchride of Ganoderma lucidum may improve the therapeutic index of nephrotoxicity induced by CDDP. However, it is needed to elucidate the mechanism for confirming the therapeutic effect.

• Advances in concrete construction
• /
• v.10 no.2
• /
• pp.171-183
• /
• 2020

The main objective of this study is the assessment of the ability of limestone mortars to resist to different chemical attacks. The ability of polypropylene (PP) fibres waste used as reinforcement of these concrete materials to enhance their durability is also studied. Crushed sand 0/2 mm which is a fine limestone residue obtained by the crushing of natural rocks in aggregates industry is used for the fabrication of the mortar. The fibres used, which are obtained from the waste of domestic plastic sweeps' fabrication, have a length of 20 mm and a diameter ranging between 0.38 and 0.51 mm. Two weight fibres contents are used, 0.5 and 1%. The durability tests carried out in this investigation included the water absorption by capillarity, the mass variation, the flexural and the compressive strengths of the mortar specimens immersed for 366 days in 5% sodium chloride, 5% magnesium sulphate and 5% sulphuric acid solutions. A mineralogical analysis by X-ray diffraction (XRD) and a visual inspection are used for a better examination of the quality of tested mortars and for better interpretation of their behaviour in different solutions. The results indicate that the reinforcement of limestone mortar by PP fibres waste is an excellent solution to improve its chemical resistance and durability. Moreover, the presence of PP fibres waste does not affect significantly the water absorption by capillarity of mortar nether its mass variation, when exposed to chloride and sulphate solutions. While in sulphuric acid, the mass loss is higher with the presence of PP fibres waste, especially after an exposure of 180 days. The results reveal that these fibres have a considerable effect of the flexural and the compressive behaviour of mortar especially in acid solution, where a reduction of strength loss is observed. The mineralogical analysis confirms the good behaviour of mortar immersed in sulphate and chloride solutions; and shows that more gypsum is formed in mortar exposed to acid environment causing its rapid degradation. The visual observation reveals that only samples exposed to acid attack during 366 days have showed a surface damage extending over a depth of approximately 300 ㎛.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.1
• /
• pp.17-23
• /
• 2002

In order to investigate effects if loess on the mycellial pellet formation a phosphate-solubilizing fungus. Aspergillus sp. PS-104 was cultured in potato dextrose broth containing loess. The strain formed an amorphous pellet or loose aggregates agitated at a low speed (50 rpm) while spherical and regular pellets at a high speed (150 rpm) The higher concentration of loess was added, the smaller size of a pellet was formed during the submerged culture of the strain. As shown in results, being cultured in the PDB medium supplemented with 1.0% loess the pellet size was maximally reduced to a fourth compared to the control. Evaluating the addition effect of several components of loess such as $SiO_2$, $Fe_2O_3$, $Al_2O_3$, $CaCO_3$, $CaSO_4$ and $MgCO_3$ on the reduction of mycellial pellet size the higher concentration was supplied, the smaller size of pellet was formed except $Al_2O_3$. And the smallest pellet size was recorded at the concentration of 1.0% (W/V) magnesium carbonate.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.6
• /
• pp.235-242
• /
• 2018

High temperature electrical conductivity of Aluminum Nitride (AlN) ceramics sintered with $Y_2O_3$ as a sintering aid has been investigated with respect to various sintering conditions and MgO-dopant. When magnesium oxide is added as a dopant, liquid glass-film and crystalline phases such as spinel, perovskite are formed as second phases, which affects their electrical properties. According to high temperature impedance analysis, MgO doping leads to reduction of activation energy and electrical resistivity due to AlN grains. On the other hand, the activation energy and electrical resistivity due to grain boundary were increased by MgO doping. This is a result of the formation of liquid glass film in the grain boundary, which contains Mg ions, or the elevation of schottky barrier due to the precipitation of Mg in the grain boundary. For the annealed sample of MgO doped AlN, the electrical resistivity and activation energy were increased further compared to MgO doped AlN, which results from diffusion of Mg in the grains from grain boundary as shown in the microstructure.

• Journal of the Korean Chemical Society
• /
• v.66 no.3
• /
• pp.202-208
• /
• 2022

In this study, we tried to obtain the optimal conditions to reduce odors generated from pig wastewater using magnesia (MgO) through in-situ test after producing a reactor for removing odors. For this purpose, the filling amount of magnesia, the injection amount of pig wastewater, the aeration method, the aeration amount and the aeration time were considered. The field experiment was conducted at Cheongwoon Livestock Farm, which has a pig wastewater reservoir. As the amount of magnesia added to the weight of wastewater (500 kg) increases, the amount of ammonia (NH₃) and hydrogen sulfide (H₂S) generated tended to gradually decrease. As a result of the test, ammonia and hydrogen sulfide in the pig wastewater decreased up to 65% and 77%, respectively, for 2 days aeration after 0.8% of magnesia was added to the reaction tank. The initial pH of the pig wastewater in the reactor was 8.2, and the pH was found to be 9.2 when magnesia was added up to 0.8%. In the light of this trend, it can be known that magnesia gradually increases the pH in the pig wastewater and makes it weakly alkaline. As the pH increases, part of the ammonia gas present in the pig wastewater vaporizes into the air and the remaining part is removed by precipitation after chemical bonding with dissolved magnesium ions and phosphate ions. In order to remove the odor of pig wastewater and turn it into compost, most of the existing livestock farms go through a six-month aeration process using microorganisms. In contrast, the current study proved the effect of removing odors from pig wastewater within 2 days through chemical reactions that do not affect microbial activity.

• The Korean Journal of Physiology and Pharmacology
• /
• v.26 no.6
• /
• pp.531-540
• /
• 2022

Group 1 metabotropic glutamate receptors (mGluRs) can positively affect postsynaptic neuronal excitability and epileptogenesis. The objective of the present study was to determine whether group 1 mGluRs might be involved in synaptically-induced intracellular free Ca²⁺ concentration ([Ca²⁺]_i) spikes and neuronal cell death induced by 0.1 mM Mg²⁺ and 10 µM glycine in cultured rat hippocampal neurons from embryonic day 17 fetal Sprague-Dawley rats using imaging methods for Ca²⁺ and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays for cell survival. Reduction of extracellular Mg²⁺ concentration ([Mg²⁺]_o) to 0.1 mM induced repetitive [Ca²⁺]_i spikes within 30 sec at day 11.5. The mGluR5 antagonist 6-Methyl2-(phenylethynyl) pyridine (MPEP) almost completely inhibited the [Ca²⁺]_i spikes, but the mGluR1 antagonist LY367385 did not. The group 1 mGluRs agonist, 3,5-dihydroxyphenylglycine (DHPG), significantly increased the [Ca²⁺]_i spikes. The phospholipase C inhibitor U73122 significantly inhibited the [Ca²⁺]_i spikes in the absence or presence of DHPG. The IP₃ receptor antagonist 2-aminoethoxydiphenyl borate or the ryanodine receptor antagonist 8-(diethylamino)octyl 3,4,5-trimethoxybenzoate also significantly inhibited the [Ca²⁺]_i spikes in the absence or presence of DHPG. The TRPC channel inhibitors SKF96365 and flufenamic acid significantly inhibited the [Ca²⁺]_i spikes in the absence or presence of DHPG. The mGluR5 antagonist MPEP significantly increased the neuronal cell survival, but mGluR1 antagonist LY367385 did not. These results suggest a possibility that mGluR5 is involved in synaptically-induced [Ca²⁺]_i spikes and neuronal cell death in cultured rat hippocampal neurons by releasing Ca²⁺ from IP₃ and ryanodine-sensitive intracellular stores and activating TRPC channels.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.4
• /
• pp.49-62
• /
• 2022

The magnesium and iron-based layered double hydroxide (Mg-Fe LDH) was synthesized by the co-precipitation process and the bead type LDH (BLDH, 5~6 mm in diameter) was manufactured by using the Mg-Fe LDH and the starch as a binder. To evaluate the feasibility of the BLDH as the As stabilizer in the soil, various experiments were performed and the As stabilization efficiency of the BLDH was compared to that of powdered type LDH (PLDH, <149 ㎛ in diameter). For the As sorption batch experiment, the As sorption efficiency of both of the PLDH and the BLDH showed higher than 99%. For the stabilization experiment with soil, the As extraction reducing efficiency of the PLDH was higher than 87%, and for the BLDH, it was higher than 80%, suggesting that the BLDH has similar the feasibility of As stabilization for the contaminated soil, compared to the PLDH. From the continuous column experiments, when more than 7% BLDH was added into the soil, the As stabilization efficiency of the column maintained at over 91% for 7 pore volume flushing (simulating about 21 months of rainfall) and slowly decreased down to 64% after that time (to 36 months) under the non-equilibrium conditions. Results suggested that more than 7% of BLDH added in As-contaminated soil could be enough to stabilize As in soil for a long time. The main As fixation mechanisms on the LDH were also identified through the X-ray fluorescence (XRF), the X-ray diffraction (XRD), and the Fourier transform infrared (FT-IR) analyses. Results showed that the LDH has enough of an external surface adsorption capacity and an anion exchange capability at the interlayer spaces. Results of SEM/EDS and BET analyses also supported that the Mg-Fe LDH used in this study has sufficient porous structures and outer surfaces to fix the As. The reduction of carbonate (CO₃^2-) and sulfate (SO₄^2-) anions in the LDH after the reaction between As and the LDH was observed through the FT-IR, the XRF, and the XRD analyses, suggesting that the exchange of some of these anions with the arsenate (H₂AsO₄^- or HAsO₄^2-) occurs at the LDH interlayers during the stabilization process in soil.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.32-38
• /
• 2023

In this study, the electrochemical properties of dopamine coated silicon/silicon carbide/carbon(Si/SiC/C) composite materials were investigated to improve cycle stability and rate performance of silicon-based anode active material for lithium-ion batteries. After synthesizing CTAB/SiO₂ using the Stöber method, the Si/SiC composites were prepared through the magnesium thermal reduction method with NaCl as heat absorbent. Then, carbon coated Si/SiC anode materials were synthesized through polymerization of dopamine. The physical properties of the prepared Si/SiC/C anode materials were analyzed by SEM, TEM, XRD and BET. Also the electrochemical performance were investigated by cycle stability, rate performance, cyclic voltammetry and EIS test of lithium-ion batteries in 1 M LiPF₆ (EC: DEC = 1:1 vol%) electrolyte. The prepared 1-Si/SiC showed a discharge capacity of 633 mAh/g and 1-Si/SiC/C had a discharge capacity of 877 mAh/g at 0.1 C after 100 cycles. Therefore, it was confirmed that cycle stability was improved through dopamine coating. In addition, the anode materials were obtain a high capacity of 576 mAh/g at 5 C and a capacity recovery of 99.9% at 0.1 C/0.1 C.