• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.408-412
• /
• 2005

Porous layered carbon was prepared by interlayer pyrolysis of pyrolysis fuel oil (PFO) using magadiite template and successive dissolution of template. Particle morphology was plate type with d-spacing of approximately 0.7 nm and it had constant interlayer space. Specific surface area was $147{\sim}385m^2/g$ depending upon template type, mixing ratios and pyrolysis time.

• Korean Journal of Materials Research
• /
• v.28 no.3
• /
• pp.189-194
• /
• 2018

Porous graphites were synthesized by removing the template in HF after cabothermal conversion for 3 h at $900^{\circ}C$, accompanied by intercalations of pyrolyzed fuel oil (PFO) in the interlayer of Co or Ni loaded magadiite. The X-ray powder diffraction pattern of the porous graphites exhibited 00l reflections corresponding to a basal spacing of 0.7 nm. The particle morphology of the porous graphites was composed of carbon plates intergrown to form spherical nodules resembling rosettes like a magadiite template. TEM shows that the cross section of the porous graphites is composed of layers with very regular spaces. In particular, crystallization of the porous graphite was dependent on the content of Co or Ni loaded in the interlayer. The porous graphite had a surface area of $328-477m^2/g$. This indicates that metals such as Co and Ni act as catalysts that accelerate graphite formation.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.576-580
• /
• 2005

Porous graphite was prepared by elimination of the template after pyrolysis of PFO (pyrolized fuel oil) with catalyst Cobalt(II)-ethylhexanoate in interlayer space of magadiite template. Pyrolysis was conducted for 3~24 h at $900{\sim}1100^{\circ}C$. Graphite was well crystallized with increased pyrolysis time and temperature. Specific surface area was $261{\sim}400m^2/g$ depending upon mixing ratios, pyrolysis temperature, and pyrolysis time.

• Journal of Powder Materials
• /
• v.12 no.2 s.49
• /
• pp.151-158
• /
• 2005

Porous graphite was synthesized by removal of template in HF after pyrolysis of pyrolyzed fuel oil (PFO) at $900^{\circ}C$ using the template of Co or Ni intercalated magadiite. Porous graphite had a plate structure like template, and d-spacing value of about 0.7 nm. The extent of crystallization of porous graphite was dependent on the contents of Co or Ni intercalated in interlayer. It can be explained that the metal such as Co and Ni acts as a promotion catalyst for graphite formation. Porous graphite shows the surface area of $328\sim477 m^2/g$.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.8
• /
• pp.737-741
• /
• 1995

• Bulletin of the Korean Chemical Society
• /
• v.19 no.2
• /
• pp.218-222
• /
• 1998

Removal of Cd(Ⅱ), Zn(Ⅱ) and Cu(Ⅱ) from aqueous solutions using the adsorption process on magadiite has been investigated. It was found that the removal percentage of metal cations at equilibrium increases with increasing temperature, and follows the order of Cd(Ⅱ) > Cu(Ⅱ) > Zn(Ⅱ). Equilibrium modeling of adsorption showed that the adsorptions of Cd(Ⅱ), Cu(Ⅱ), and Zn(Ⅱ) were fitted to Langmuir isotherm. Kinetic modeling of the adsorption showed that first order reversible kinetic model fitted to experimental data. From kinetic model and equilibrium data, the overall rate constant (k) and the equilibrium constant (K) for the adsorption process were calculated. The overall rates of adsorption of metal ions follow the order of Cd(Ⅱ) > Cu(Ⅱ) > Zn(Ⅱ). From the results of thermodynamic analysis, standard Gibbs free energy (ΔG°), standard enthalpy (ΔH°), and standard entropy (ΔS°) of adsorption process were calculated.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.1
• /
• pp.25-26
• /
• 2004

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.70-73
• /
• 1999

Amorphous silica was hydrothermally reacted for 48~120h at $170~180^{\circ}C$ in molar ratios of $SiO_{2}/(NaOH+Na_{2}CO_{3})=2~20\;and\;H_{2}O/(NaOH+Na_{2}CO_{3})=200~250$. Na-kenyaite nuclei were formed directly from amorphous silica without formation of Na-magadiite nuclei in wide range with $SiO_{2}/(NaOH+Na_{2}CO_{3})=3~20$. Above $SiO_{2}/(NaOH+Na_{2}CO_{3})=10$, Na-kenyaite always produced with a residual amorphous silica. Well-crystallized Na-kenyaite without residual amorphous silica were obtained in the range of $SiO_{2}/(NaOH+Na_{2}CO_{3})=3~10$. Morphology of Na-kenyaite exhibited that a large spherical and loosely packed aggregates changed into the smaller and individual platelets according to increase of reaction time.

• Journal of Powder Materials
• /
• v.12 no.2 s.49
• /
• pp.122-130
• /
• 2005

Layered silicate was synthesized at hydrothermal condition from silica adding to various materials. Nano-clay was synthesized by intercaltion of various amine compounds into synthetic layered silicate. The products were analysed by XRD, SEM, and FT-IR in order to examine the condition of synthesis and intercalation. From the results, it was confirmed that kaolinite was synthesized from precipitated silica and gibbsite at $220^{\circ}C$ during 10 days, and hetorite was synthesized from silica sol at $100^{\circ}C$ during 48 h. Na-Magadiite was synthesized from silica gel at $150^{\circ}C$ during 72 h, and Na-kenyaite was synthesized from silica gel at $160^{\circ}C$ during 84 h. Nano-clay was prepared using synthetic layered silicate intercalated with various amine compounds. Kenyaite was easily intercalated by various organic compounds, and has the highest basal-spacing value among other layered silicates. Basal-spacing was changed according to the length of alkyl chain of amine comopounds. Polymer can be easily intercalated by dispersion with large space of interlayer. Finally, epoxy/nano-clay nanocomposite can be easily prepared.