• 한국유체기계학회 논문집
• /
• 제15권2호
• /
• pp.51-56
• /
• 2012

The butterfly valve has been used over all industries. It has been studied to improve its performance through the theoretical analysis and the test in industry. Though products adopted those improvements have been sold in markets, manufacturers often launch products without the life test. One reason is because of the long development period and financial difficulties. The other is the lack of the design and fabrication experiences on building the life test equipment. Thus, this study has been researched for the design and fabrication of our life test equipment, and developed and improved the equipment to check the leakage of the valve with the naked eyes during the test.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.608-613
• /
• 1997

This study discusses the developmentof hydraulic rotary actuator design technology for industriol machinery and earthmoving equipment. The lubrication and wear analysis of sliding components of the machinery are very important parameters to sterngth the design technique. The analysis and were test are performed for the selected materials of the above mentioned coupled sliding members using the experimental results. One can selsct the better combination of sliding components.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.953-956
• /
• 1996

The main regularities of the process of strain of the leafstalk boimass of the annual and parennial sown grasses (hard phase) with the simulataneous filtration of the vegetable juice (liquid phase) in the working members of the uninterrupted action(screw press) and the periodic action (Briqueting stamp press) were established . The engineering methods of calculation of the basic constructive -technological parameter of the pres equipment of the given types were worked out.

• 항공우주시스템공학회지
• /
• 제13권4호
• /
• pp.43-49
• /
• 2019

고속비행체의 내외부 환경에서 가열이 된 고온고압의 흡열연료를 구현하고, 촉매를 이용한 흡열 열교환기의 성능평가를 가능하도록 하는 시험장치를 설계/제작하였다. 시험장치를 원활히 운용하기 위해, 예비시험을 통하여 고온의 흡열연료를 공급하기 위한 시험절차를 확립하였다. 흡열연료의 공급조건에 따른 촉매성능 시험을 수행하고 흡열량을 분석하였다. 선행연구사례와 동일한 반응조건에서의 촉매 반응결과를 비교하여 시험장치의 타당성을 검증하였다. 본 시험장치는 향후 다양한 조건의 흡열연료와 촉매의 흡열반응 시험에 활용할 수 있다.

• 한국정밀공학회지
• /
• 제34권1호
• /
• pp.19-22
• /
• 2017

This paper describes the efficient equipment maintenance that can offer the exact time for repair and change of component in root industry. A conventional method offered the fixed time for repair and change of component because the method is based on early guarantee specification of the component. However the operating condition of manufacturing field is often under worse condition than early guarantee condition for high productivity. So, most components can't use until early guarantee time due to the operation of various different condition. Therefore we suggest the useful method for efficient equipment-maintenance by manufacturing-field analysis and feedback database. For this, the classification of root industry and related equipment is performed and then the detail classification of the process and component for equipment maintenance. And the monitoring module is also designed to gather data for feedback process and the environment is basically implemented for aging and reliability test.

• 전기저널
• /
• 5호통권65호
• /
• pp.4-8
• /
• 1982

• 한국안전학회지
• /
• 제34권3호
• /
• pp.21-27
• /
• 2019

Many accidents have been occurring during welding and flame cutting work related to maintenance and repair as the domestic manufacturing facilities gradually become decrepit. However, it is not easy to find the accurate statistics and analysis data on accidents occurring during welding or flame cutting operations related to maintenance and repair of machinery and equipment. Therefore, in this study, the fatal accident cases of fire/explosion and asphyxiation that occurred during the welding and flame cutting work in the manufacturing industry were collected and their characteristics were analyzed. Then, we tried to find the connection of the accidents according to the machinery/equipment and the work content, and to provide the materials and measures that can be used to prevent the similar accidents. We collected 329 cases of the fatal accidents related to fire/explosion and leakage/contact of chemical substances in the domestic manufacturing industry during the last 10 years (2008 ~ 2017). Among them, 72 accidents occurred during welding or flame cutting were extracted and the related reports were investigated whether they occurred during usual work or unusual work. Also, the machinery/equipment and the work content related to the accidents were classified and analyzed based on the criteria. The analysis results showed that 31 cases of the fire/explosion accidents occurred during usual work and 32 cases during unusual work, and it was found that 9 cases of asphyxiation death occurred during usual work. Then, from the analysis results, the connections of the machinery/equipment and the work contents related to the accidents were schematized into a accident tree.

• 한국정보통신학회논문지
• /
• 제22권12호
• /
• pp.1577-1588
• /
• 2018

최근, 선박에 탑재된 장비로부터 수집되는 정보를 분석하여 운항 및 유지보수 지원 목적으로 활용하기 위한 여러 연구가 진행되고 있다. 항해통신장비의 인터페이스의 경우 상대적으로 표준화가 잘 이루어져 있으나 선박 기관부 및 기타 장비부의 인터페이스는 여러 이유로 인해 표준화가 되어있지 않아 데이터 교환 및 관리에 많은 한계가 존재한다. 이러한 문제를 극복하기 위한 목적으로 해상 필드 데이터 공유를 위한 선박 데이터 서버에 관한 표준인 ISO 19847과 선박 기계 장비부 데이터 표준인 ISO 19848이 현재 제정 막바지 단계로 최근 공표를 앞두고 있다. 본 논문에서는 이러한 두 가지 국제표준의 DIS 버전을 기반으로 선박 기관부 데이터 관리 플랫폼을 개발하고, 이를 기반으로 필드 데이터 교환에 관한 실험을 수행하는 것에 관한 내용을 다룬다. 이를 위해서 관련연구 및 ISO 19847/19848의 요구사항을 분석하고, 요구사항을 충족하는 선박 데이터 플랫폼 아키텍처를 설계하며, 각 구성요소를 개발하여 유용성을 검증한다.

• 드라이브 ㆍ 컨트롤
• /
• 제20권1호
• /
• pp.41-47
• /
• 2023

The aim of this study was to develop a method for installing strain gauges on moving, lubricating oil-filled, and sealed parts, such as drive shafts of equipment, including construction machinery. A measuring device was constructed using an embedded CPU and an IoT sensor to measure the strain of the strain gauge, which allowed for the measurement of axial torque and axial force, and subsequent analysis. To verify the performance of the developed device, the axial torque and axial force of the forklift were measured during operation using a strain gauge attached to the inside of the drive shaft. This study confirmed the possibility of measuring and analyzing the strain of a moving part, such as the inside of a drive shaft, which is sealed and filled with hydraulic oil.

• 드라이브 ㆍ 컨트롤
• /
• 제20권4호
• /
• pp.71-79
• /
• 2023

In the field of agricultural machinery, various on-field tests are conducted to measure design load for optimal design of agricultural equipment. However, field test procedures are costly and time-consuming, and there are many constraints on field soil conditions due to weather, so research on utilizing simulation to overcome these shortcomings is needed. Therefore, this study aimed to model agricultural soils using discrete element method (DEM) software. To simulate draft force, predictions are made according to travel speed and compared to field test results to validate the prediction accuracy. The measured soil properties are used for DEM modeling. In this study, the soil property measurement procedure was designed to measure the physical and mechanical properties. DEM soil model calibration was performed using a virtual vane shear test instead of the repose angle test. The DEM simulation results showed that the prediction accuracy of the draft force was within 4.8% (2.16~6.71%) when compared to the draft force measured by the field test. In addition, it was confirmed that the result was up to 72.51% more accurate than those obtained through theoretical methods for predicting draft force. This study provides useful information for the DEM soil modeling process that considers the working speed from the perspective of agricultural machinery research and it is expected to be utilized in agricultural machinery design research.