• 한국산업융합학회 논문집
• /
• 제10권4호
• /
• pp.195-200
• /
• 2007

These days, various and complex threads are developed, so it is necessary to develop the cutting a thread sensors for checking a cut thread in severe environment and it is very important to evaluate the quality of the cutting a thread sensors. The analysis of variance(ANOVA) method is very useful method on the quality evaluation field. In this study, the quality is evaluated by one way layout ANOVA method with the surface roughness data. The experiment is carried out by 3 sensors and the result show that the sensors have the good quality in precision.

• 한국산업융합학회 논문집
• /
• 제14권1호
• /
• pp.29-36
• /
• 2011

This study analyzed the convenience and productivity before and after adopting self-propelled power transportation devices to the harvest and transportation of fruit and vegetable products in the Gyeongbuk region, by applying the REBA and RULA techniques. In the REBA analysis, the work risk was low with 4~6 points before adoption which became 2~3 points after adoption. As for the RULA analysis, work loading appeared to have decreased with 6~7 points before adoption which became 3~4 points after adoption. The annual work time reduction was about 48~179 hours while labor costs were reduced to 364~1,345 thousand won annually. This indicated a labor cost reduction effect of about 10~15%. Therefore, the adopted self-propelled power transportation devices appeared to prevent musculo skeletal diseases of the human body and also improve productivity even after using it for long hours according to the REBA, RULA measures level.

• 한국산업융합학회 논문집
• /
• 제25권2_2호
• /
• pp.309-314
• /
• 2022

The bonding strength [ISO22674] test was conducted by firing a dedicated ceramic powder on the surface of the dental titanium material treated with micro-arc oxidation. In the test group, an average result value of 34.34 MPa was obtained, and in the control group, a result value of 21.53 MPa was obtained. The bonding strength of the test group was higher than that of the control group by 12.81 MPa, resulting in a 37% improvement in durability of the dental artificial tooth ceramic restoration.

• 한국산업융합학회 논문집
• /
• 제25권5호
• /
• pp.835-842
• /
• 2022

In this study, the membrane degassing process of the sweep gas - vacuum combination type was proposed for ammonia wastewater treatment. The effect of pH, initial ammonia concentration and scale-up on ammonia degassing performance was investigated. As a result, as the pH and the initial ammonia concentration increased, the degassing permeate flux was improved. On the other hand, the ammonia mass transfer coefficient increased as the initial ammonia reduced, which seems to be due to the driving force of the sweep gas-vacuum combination type membrane degassing system proposed in this study. In addition, 80 mg NH₃/min of the ammonia degassing rate was achieved using a 6×28 inch size module. Better degassing performance is expected if consideration for maintaining vacuum pressure is involved in the scale-up design.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1046-1050
• /
• 2000

The necessity of diagnosis of the rotating machinery which is widely used in the industry is increasing. If rotating machinery has fault, we can detect fault using vibration or noise. But, in diagnosing rotating machinery, the end user who doesn't have expert knowledge needs the help of vibration diagnosis expert. However, vibration diagnosis experts who well satisfy the demand of end user are rare. So, this paper propose a development of the case-based reasoning system for abnormal vibration diagnosis of rotating machinery we construct the past experiences of vibration diagnosis expert into case base and shear the experiences of diagnosis expert with the end user. In this paper, we describe that process of structured system and adapting result of abnormal vibration diagnosis of electric motor.

• 한국산업융합학회 논문집
• /
• 제20권1호
• /
• pp.8-18
• /
• 2017

This research analyzed the ventilation effect of the multi-span greenhouse based on the types of greenhouse structure, weather conditions, and locations inside the greenhouse. To compare and analyze the ventilation effects with different types of greenhouse, the uniform environmental conditions should be selected in advance. But these factors are not controlled and require tense many precision facilities and labor forces. Thus, the CFD simulation was used for the air stream to be analyzed qualitatively and quantitatively. In addition, for the ventilation effect analysis, the TGD (Tracer Gas Decay) was used to overcome the shortcomings of the current ventilation measurement method. The calculation error of ventilation rate using TGD was low (10.5%). Thus, the TGD is very effective in calculating the ventilation efficiency. The wind direction of 90 degrees showed the best ventilation effect. The ventilation rate also decreased along the air circulation path, and the rate was the lowest around the outlet. The computed fluid method (CFD) turned out to be a power tool for simulating flow behavior in greenhouse.

• 한국산업융합학회 논문집
• /
• 제23권1호
• /
• pp.93-100
• /
• 2020

In this paper, soilless cucumber cultivation was investigated, fermented fertilizer to increase the cucumber yield was considered, and the greenhouse temperature control system for cucumber cultivation is developed. To do this, perlite was proposed to replace soil as growth medium. Fermented cows and pigs manure was proposed as plant fertilizer. Combination of fan, water sprinkler, and pipe heating system was proposed to control the greenhouse temperature. However, because this research was conducted during the summer, the greenhouse system observed in this study only focused on variations in the flow rate of the water sprinkles used. The experimental result shows that soilless culture in the greenhouse could be an alternative to traditional field production for high-value vegetable crops. Furthermore, application of fermented fertilizer of 10% could enhance the growth and increase the yield and quality of crops. The proposed sprinkler flow rate is best suited for cucumber crop with the best thrives was 0.846 kg/s.

• 한국산업융합학회 논문집
• /
• 제20권2호
• /
• pp.157-168
• /
• 2017

The pressure drop characteristics of air particle flow in a powder transport piping system were analyzed in this study. The pressure drop characteristics of air particle flow in the piping system have not well understood due to the complexibility of particle motion mechanism. Particles or powders suspended in the air flow cause the increase of the pressure drop and affect directly transport efficiency. In this study, the pressure drop in a powder transport piping system was analyzed with interactions of air flow and particle motion in straight and curved pipes. The total pressure drop increased with pipe length, mixture ratio, and friction factor of particles because of increased friction loss of air and particles in the piping system. For the coal powders of $74{\mu}msize$ and powder-to-air mass mixture ratio of 0.667, the total pressure drop under the consideration of powders and air flow was calculated as much as 30% higher than that air flow only.

• 한국산업융합학회 논문집
• /
• 제24권3호
• /
• pp.333-341
• /
• 2021

Irrigation scheduling is a water management strategy of applying the proper amount of water in a plant's root zone at the right time to maximize profit. We conducted an experimental evaluation of the response of soybean, sorghum, and sesame to an irrigation scheduling scheme. The soil water contents were adjusted in the root zone between 20% and 28% to reflect changes in crop water consumption. The other ones fixed at 25% during the whole growing season were compared to evaluate the effectiveness of irrigation scheduling. Surface drip irrigation (SDI) were employed as an irrigation method. For all three crops, the evapotranspiration (ET) was the greatest at flowering stage (6.93 mm), followed by vegetative growth stage (5.00 mm) and maturity stage (2.53 mm). The irrigation amount was significantly reduced by 21.8% (soybean), 22.2% (sorghum), and 16.1% (sesame), respectively, compared with the ones at constant soil water content treatment. Their water use efficiency (WUE) were also much higher than the controls: 2.65-fold increase at soybean, 1.82-fold increase at sorghum, and 1.47-fold increase at sesame. These results showed that an effective irrigation scheduling on upland crops (soybean, sorghum, sesame) could increase crop yield while minimizing water use.

• 한국기술혁신학회:학술대회논문집
• /
• 한국기술혁신학회 2000년도 춘계학술대회
• /
• pp.154-173
• /
• 2000

Since computerized numerical controller (CNC) emerged as a result of the fusion of the electronics technology and the mechanical technology, there has been continuous evolution of CNC technology in the mechatronics industry. The industry is recently developing a new control system based on the fusion of personal computer (PC) and CNC. Upgraded PC has now integrated into CNC, making various machines possible to exchange data, software and hardware, and to greatly improve man-machine interface. The fusion of PC and CNC can form a new paradigm in technological innovation of not only control system but also whole machinery industry in near the future. Korea lagged behind the developed countries in the development of open control system with the fusion of PC. Turbo-tek, Hyundai Motor and Daewoo are leading companies, but their commercial possibility seems to be low because domestic market is too small to reap a commercial benefit. Nevertheless, the development of the system is an essential step for Korea to embark on a future technological paradigm of the machinery industry. The government needs to play some role for the development, for instance, government R&D projects, institutional building and training of related technicians.