• 한국포장학회지
• /
• 제4권2호
• /
• pp.12-17
• /
• 1998

개발한 EPS 포장상자가 농산물의 신선도 유지효과 기능이 있는지의 여부를 분석코자 배를 포장하여 $20^{\circ}C$에 저장하면서 골판지상자와 0.02와 0.04mm 두께의 LDPE필름으로 포장한 것들과 신선도 유지효과를 비교하였다. 저장 50일 후 중량 감소는 대조구는 4.4%, EPS 상자는 0.7%의 중량감소가 나타났고, 비타민C도 2.12와 2.63 mg%로 EPS 포장구가 20% 높게 유지되고 있었다. 당도와 산도는 포장구간에 큰 차이가 있었으며 부패는 대조구는 상자당 1-2개과가 발생했으나 EPS 포장구는 발생하지 않아 개발한 EPS 포장구를 신선도 유지를 위한 유통용 상자로 활용가능성이 확인되었다.

• 한국세라믹학회지
• /
• 제45권12호
• /
• pp.760-765
• /
• 2008

In this study, the effects of small amounts (${\leq}3\;mol%$) of Li doping on the sintering characteristics and electrochemical performance of $(ZrO_2)_{0.89}(ScO_{1.5})_{0.1}(CeO_2)_{0.01}$ (ScSZ) were investigated. By adding 3 mol% lithium, the densification temperature of ScSZ was reduced from the conventional temperature of $1400^{\circ}C$ to $1200^{\circ}C$. It was found that Li doping also led to changes in the Zr:Sc ratio at the grain boundaries. Correspondingly, the dispersion of lithium zirconia at the grain boundaries accelerated the growth of ScSZ grains and increased the grain boundary resistance at temperatures below $450^{\circ}C$. At elevated temperatures of $450{\sim}750^{\circ}C$, the electrical conductivity of the ScSZ after doping remained almost unchanged under air and reducing atmospheres. These results suggest that the addition of lithium is promising for use in low temperature co-firing of ScSZ-based components for intermediate temperature solid oxide fuel cells.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.150-152
• /
• 2003

YBa$_2$Cu$_3$O$_{7-{\delta}}$(YBCO) coated conductors were deposited by pulsed laser deposition (PLD) on short buffered substrate in continuous PLD reel-to-reel system. The oxide multilayer buffered substrate of architectures of CeO$_2$/YSZ/Y$_2$O$_3$was fabricated by PLD at steady status. The degree of texture of each layer was investigated using X-ray diffraction including $\theta$-2$\theta$ scans, $\omega$-scans and $\Phi$-scans analysis. Their surface morphology was observed by scanning electron microscopy (SEM) The FWHM of the X-ray $\omega$-scans and $\Phi$-scans indicated that YBCO and buffer layers closely replicate the in-plane and out-of-plane texture of metal tape. Critical current at 77K self-field of 19A, critical temperature of 86K, and current density of 2MA/$\textrm{cm}^2$ were measured. The film also exhibits a homogeneous and dense surface morphology.e morphology.

• 한국표면공학회지
• /
• 제50권5호
• /
• pp.315-321
• /
• 2017

Antireflective pyramid arrays can be readily obtained via anisotropic etching in alkaline solution (KOH, NaOH), which is widely used in crystalline-Si (c-Si) solar cells. The periodic inverted pyramid arrays show even lower light reflectivity because of their superior light-trapping characteristics. Since this inverted pyramidal structures are mostly achieved using very complex techniques such as photolithograpy and laser processes requiring extra costs, here, we demonstrate the Cu-nanoparticle assisted chemical etching processes to make the inverted pyramidal arrays without the need of photolithography. We have mainly controlled the concentration of $Cu(NO_3)_2$, HF, $H_2O_2$ and temperature as well as time factors that affecting the reaction. Optimal inverted pyramid structure was obtained through reaction parameters control. The reflectance of inverted pyramid arrays showed < 10% over 400 to 1100 nm wavelength range while showing 15~20% in random pyramid arrays.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.93-96
• /
• 2004

다층의 산화물 박막 구조를 갖는 coated conductor의 장선 제조를 위해서는 연속 증착 공정이 필요하다. 본 연구에서는 RABiTs와 IBAD 공정을 사용한 texture template을 사용하였으며, 금속 테잎을 연속적으로 이동하면서 증착할 수 있는 박막증착 장치(PLD, sputtering, evaporation)를 구축하여 PVD 방법으로 coated conductor를 제조하였다. $CeO_2/YSZ/Y_2O_3$의 완충층을 sputtering 과 evaporation을 이용하여 2축배향성을 가지는 NiW 위에 연속적으로 증착하였다. YBCO 초전도층은 연속 PLD 방법으로 증착하고, Tc, Ic, XRD, SEM을 통해 그 특성을 분석하였다. 그 결과 RABiTS template을 사용하여 Ic가 34A/cm(@77K)인 0.4m 길이의 coated conductor를 제조하였다. IBAD template를 사용하여 Ic가 34A/cm(@77K)인 0.5m길이의 coated conductor를 제조하였고, Jc는 $1.2MA/cm^2$ 이였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권4호
• /
• pp.16-18
• /
• 2007

We report the results of MOD-processed YBCO coated conductors on the IBAD-MgO template. The precursor solution was coated on the $CeO_2-buffered$ IBAD-MgO template using a slot-die coating method, calcined at a temperature of $550^{\circ}C$, and fired at high temperatures for 2.5 h in a reduced oxygen atmosphere. The $J_C$ value of YBCO coated conductors was found to be very sensitive to the microstructure, and thus higher $J_C$ value could be achieved when the in-plane texture was higher and the difference in $T_{C,zero}$. was negligible. Optimally processed YBCO coated conductor exhibited $J_C$ value of $0.75MA/cm^2$ at 77 K in self-field, which might be due to somewhat depressed $T_{C,zero}$ of 87.3 K caused by possible $Sm^{3+}$ substitution on the $Ba^{2+}$ site.

• 한국해양학회지:바다
• /
• 제2권2호
• /
• pp.125-137
• /
• 1997

심해저 퇴적물중 금속과 희토류 원소의 수직 함량변화 및 변화의 원인을 구명하기 위해 북동태평양 클라리온-클리퍼톤 균열대(Clarion-Clipperton fracture zone) 중남부에 위치한 한국심해환경연구(Korea Deep-sea Environmental Study, KODES) 지역에서 박스코어러(box corer)를 이용해 18개의 주상시료를 채취했다. KODES 지역 퇴적층은 색상변화에 따라 갈색의 Unit I, 연갈색의 Unit II, 흑(갈)색의 Unit III로 분류된다. Unit I은 Unit II에 비해 높은 Ni/Cu비를 가지고, Unit III는 Unit I, II에 비해 현저히 높은 금속함량을 보인다. Unit II는 지화학적 자료에 근거하여 상부의 Unit IIa 층과 하부의 Unit IIb 층으로 세분될 수 있는데, Unit IIb 층은 Unit IIa 층에 비해 높은 구리 및 3+REEs/NASC 비(또는 큰 음의 Ce 이상치) 등의 특징을 보인다. Unit III는 흑갈색의 상부 Unit IIIa 층과 흑색의 하부 Unit IIIb 층으로 세분되는데, Unit IIIb 층은 Unit IIIa 층에 비해 망간, 철 함량이 높다. 연구지역이 속한 태평양 지판의 확장속도와 방향 그리고 약 11-30 Ma 인 Unit III의 연령을 고려할 때 Unit IIIb 층은 동태평양 균열대(East Pacific Rise, EPR) 그리고 적도와 근접한 위치에서 퇴적된 것으로 계산된다. 흑색인 Unit IIIb 층의 높은 망간, 철 함량은 EPR에서 기원한 화산기원의 철, 망간 등을 공급받아 나타난 결과로 보인다. 한편, Unit III는 물론이고 Unit IIb 역시 적도 고생산대의 영향권에 있었고, 따라서 해수중 풍부한 유기체들과 함께 구리, 희토류 원소 등도 Unit IIb, III 층으로 많이 공급되었을 것이다. 퇴적물로 공급된 이들 구리 및 희토류 원소들은 유기물이 분해됨에 따라 스멕타이트 그리고 어류 잔해물(fish bone debris) 등에 잔류한 것으로 보인다. 즉 KODES 지역 주상 퇴적물에서 나타나는 구리 및 희토류 원소의 수직 함량변화는 연구지역이 제3기 말 시기에 적도 고생산대를 지나는 동안 많은 유기물을 공급받아서 초래된 결과로 사료된다.

• 한국광물학회:학술대회논문집
• /
• 한국광물학회.한국암석학회 2003년도 공동학술발표회 논문집
• /
• pp.67-67
• /
• 2003

The chemical compositions and textural relationships of the Nb-Zr oxide minerals including pyrochlore [ideally (Ca,Na)$_2$Nb$_2$O$\sub$6/(OH,F), with up to 24% UO$_2$ and 16% Ta$_2$O$\sub$5/] and baddeleyite [ideally ZrO$_2$, with up to 6% Nb$_2$O$\sub$5/] in the Sokli carbonatite complex, Kola Peninsula, Arctic are described. These two minerals in carbonatites are the major hosts for the HFSEs such as U, Th, Ta, Nb, Zr and Hf and thus are interest both economically and petrologically. The Sokli carbonatite complex (360-370 Ma) in Northern Finland, which forms a part of the Paleozoic Kola Alkaline Province (KAP), is mainly composed of multi-stages of carbonatite and phoscorite associations (P1-C1 P2-C2, P3-C3, D4 and D5) surrounded by altered ultramafic rocks (olivinite and pyroxenite) and cut by numerous small dikes of ultramafic lamprophyre. The Sokli complex contains the highest concentration in niobium and probably in tantalum, which are economically very important to modern steel technology, among the ultramafic-alkaline complexes of the KAP. Pyrochlore and baddeleyite mostly concentrate in the phoscorites. Pyrochlores in the Sokli complex are generally rounded octahedra and cubes in shape, red brown to grey yellow in color, and 0.2 to 5 mm in size. They are found in all calcite carbonatites, phoscorites and dolomite carbonatites, except P1-C1 rocks. These pyrochlores display remarkable zonations which depend on host rock compositions, and have significant compositional variations with evolution of the Sokli complex. The common variation scheme is that (1) early pyrochlore is highly enriched in U and Ta; (2) these elements decrease abruptly in the intermediate stage, while Th and Ce increase, and (3) late stage pyrochlore is low in U, Ta, Th, and Ce, and correspondingly high in Nb. Baddeleyites in the Sokli complex occur in the early P1-C1 and P2-C2 rocks and rarely in P3. They crystallized earlier than pyrochlores, and occasionally show post-magmatic corrosion and replacement. The FeO and TiO$_2$ contents of baddeleyites are much lower than those of the other terrestrial and lunar baddeleyites, whereas Nb$_2$O$\sub$5/ and Ta$_2$O$\sub$5/ contents are the highest among the reported compositions. Ta/Nb and Zr/Nb ratios of pyrochlores and baddeleyites decrease towards later stage facies, which is in accordance with the whole rock compositions. The variation of Ta/Nb and Zr/Nb ratios of pyrochlores and baddeleyites is considered to be a good indicator to trace an evolution of the carbonatite complexes.

• 자원환경지질
• /
• 제19권2호
• /
• pp.97-107
• /
• 1986

이목화강암(梨木花崗岩)은 칼크-알카라인 subsolvus 몬조화강암(花崗岩)에 속(屬)하고 중립질(中粒質)이며, 석영(石英), 장석(長石), 흑운모(黑雲母) 및 각섬석(角閃石)으로 구성(構成)되어 있다. 본(本) 화강암(花崗岩)은 광물조성(鑛物組成) 및 지화학적(地化學的) 특징(特徵)으로 보아 "I-type" 및 "magnetite-series"로 분류(分類)된다. 이목화강암(梨木花崗岩)의 친(親)마그마가 주위 모암(母岩)인 조선누층군(朝鮮累層群)의 암석(岩石)(주(主)로 석회암(石灰岩))을 포획하여 동화(同化)시킴으로 마그마의 화학적(化學的) 특성(特性)이 일부(一部) 변(變)한 것으로 사료(思料)된다. 이목화강암(梨木花崗岩)은 함백분지(咸白盆地)주위의 구조적(構造的) 약선대(弱線帶)인 동서(東西) 및 남북방향(南北方向)이 교차(交叉)하는 단층면(斷層面)이나 단열대(斷裂帶)를 따라서 지각(地殼)의 천부(淺部)까지 관입(貫入)하고 있다. 이목화강암(梨木花崗岩)의 본원(本源)마그마는 해양지각(海洋地殼)의 subduction으로 인(因)한 상부(上部)맨틀의 부분용융(部分熔融)에 의(依)하여 형성(形成)되었다. 마그마의 분별결정작용(分別結晶作用)에 있어서는 장석(長石)의 분별작용(分別作用)에 의(依)해 화학적(化學的) 영향을 크게 받은 것으로 나타났다. 본(本) 화강암(花崗岩)에서 분리(分離)한 흑운모(黑雲母)를 대상(對象)으로 K-Ar년대측정(年代測定)을 실시(實施)한 결과(結果) $96.7{\pm}2.0Ma$로 밝혀졌다.

• Progress in Superconductivity
• /
• 제6권1호
• /
• pp.74-78
• /
• 2004

YBCO coated conductor is one of the most promising materials as a new generations wire especially for practical power applications. In this work, $YBa_2$$Cu_3$$O_{7}$ -$\delta$/(YBCO) coated conductors (CC) were deposited by pulsed laser deposition (PLD) from buffer layers to superconducting layer on hi-axially textured metal tape. The oxide multilayer buffered substrate of architectures of $CeO_2$/$YSZ/Y_2$$O_3$ was fabricated by PLD at steady status. Then YBCO layer was deposited on RABiTS substrate by stationary and reel-to-reel (R2R) continuous process and we compared with deposition conditions of both processes. The degree of texture of each layer was investigated using X-ray diffraction including $\theta$-2$\theta$ scans, $\omega$-scans and $\Phi$-scans analysis. Their surface morphology was observed by scanning electron microscopy (SEM). The FWHM of the X-ray $\Phi$-scans and $\Phi$-scans indicated that YBCO and buffer layers closely replicate the in-plane and out-of-plane texture of metal tape. Critical current (Ic) at 77 K, self-field of 75.8 A/cm-width, critical temperature (Tc) of 85 K, and critical current density (Ic) of 3.7 MA/$\textrm{cm}^2$ were measured from coated conductor deposited by stationary process. And coated conductor deposited by R2R continuous process had Ic of 57.5 A/cm-width, Tc of 86.5 K and Jc of 2.0 MA/$\textrm{cm}^2$. The film also exhibits a homogeneous and dense surface morphology.