• Journal of the Korean Institute of Landscape Architecture
• /
• v.24 no.3
• /
• pp.96-108
• /
• 1996

This study aimed at choosing the urban community parks such as D Kjin, Chungang, Dosan Park as the target place for this study, and at analyzing the damage level of the pavement surfaces focusing on the spaces and the materials. We devided the damage level within $1.5\times$1.5m grid int the grade from one to five points, and made use of the method of giving marks to get hold of the damage level of the pavement surfaces. Especially we took and analyze Duncan test for the spaces suffering severe damage. The result is as follows : 1. The damage of unenenness turned out to be a most excessive damage in the damage level according to the pavement materials in case of D kjin, and Chunggnag Park. Especially the concrete blocks proved to be the exessive damage in comparison with the other pavement materials, and the demolitional damage of the damage types to the most severe damage. The corner damage turned relatively out to be a heavy damage in case of Dosan Park in Seoul. 2. In the event of the damage level of pavement surfaces according to the spaces, the space which was made the more use of and which was the more concentrated, turned out to be the degree of the more excessive damage. 3. We took the Duncan test to verify the deference of the damage type between the spaces and the pavement materials of the target places for survey. The result of verification was that there was no difference of the damage type between the corner and block damage itself in case of the enterance area and the square of D kjin Park in Ch nju, and that the damage level of the pavement materials proved to be the more execssive damage than that of the spaces. The corner damage of Chungang Park in Hj ngju, showed the same result as D kjin Park in Ch nju and the uneveness didn't have any difference of damage type in all spaces. In case of Dosan in Seoul, the damage of crevice, demolition, and pumping didn't have any difference of damage type and the damage of the cross area was the most high. In conclusion, we proposed that we should get hold of whether the cause of pavement damage is caused by the defect of materials of by the construction problem including the foundation, or the unsuitableness of the method for using the pavement materials, and also that we should take a sensus of the user type and should decide a suitable design load and the necessary thickness of the pavement materials. In this study, not only we aimed at the external damage of the materials, but we tried to propose rather reasonable and developed construction method by studying the material experiment, the foundation state, and the type of using the spaces and materials, and by examining into the fundamental damaged cause.

• Restorative Dentistry and Endodontics
• /
• v.35 no.4
• /
• pp.295-301
• /
• 2010

Recent studies demonstrated that the combination of chlorhexidine (CHX) and sodium hypochlorite (NaOCl) resulted in the formation of a precipitate, para-chloroaniline (PCA). Alexdidine (ALX) is a kind of biguanides like CHX, and has stronger detoxification effect against the bacterial virulence factors such as lipoteichoic acid and lipopolysacchardide compared with CHX. The purpose of this study was to determine whether PCA was formed after chemical interaction between ALX and NaOCl using mass spectrometry. Mass spectrometry was performed for the mixture of five different concentrations of ALX (1, 0.5, 0.25, 0.125, 0.0625%) and 4% NaOCl. Results showed that the peak of PCA was not detected in mixed solutions of ALX and NaOCl in mass spectrometry analysis. The color of mixed solution of ALX and NaOCl after chemical interaction was light yellow to white, but there wasn't any precipitate found.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.202-209
• /
• 2005

This study concerns the performance of boiling heat transfer in inclined thermosyphons with internal grooves. A study was carried out with the performance of the heat transfer of the inclined thermosyphon having 60 internal grooves in which boiling and condensation occur. A plain thermosyphon having the same inner and outer diameter as the grooved thermosyphon is also tested for comparison. Distilled water, methanol and ethanol have been used as the working fluid. The inclination angle, three working fluids, heat flux and the boiling heat transfer coefficient at the evaporator zone are estimated from the experimental results. The experimental results have been assessed and compared with existing correlations. Imura's and Kusuda's correlation for boiling showed in good agreement with experimental results within ${\pm}20%$ in plain thermosyphon. The high heat transfer coefficient was found between $25^{\circ}$ and $30^{\circ}$ of inclination angle for water and between $20^{\circ}$ and $25^{\circ}$ for methanol and ethanol. The relatively high rates of heat transfer have been achieved in the thermosyphon with internal micro grooves.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.94-102
• /
• 2016

The purpose of this study was to examine the relationship between adult attachment, adjustment to college life, and interpersonal competence in nursing college students and investigate whether or not interpersonal competence mediates the relationship between adult attachment and adjustment to college life. The subjects of this study were 685 college students located in J-si and M-si, and data were collected for 25 days from November 1 through 25, 2015. The collected data were analyzed by t-test, Pearson correlation coefficients, Hierarchical regression, and Sobel test using SPSS 23.0. As adult attachment increased, adjustment to college life was enhanced (B=.225, p=.027); as interpersonal competence increased, adjustment to college life improved (B=.145, p=.040); and as adult attachment increased, interpersonal competence increased (B=.396, p=.021). In addition, interpersonal competence significantly mediated the relationship between adult attachment and adjustment to college life (Z=3.560, p<.001). To enhance adjustment to college life in nursing college students, adult attachment and interpersonal competence need to be improved.

• Resources Recycling
• /
• v.9 no.2
• /
• pp.40-45
• /
• 2000

Low density ceramic supporter was prepared by using fly ash as a starting mterial with borax or glass powders. Also the wheat powders were used by 30 wt% to increase the initial porosity of the supporter. The density of the supporter decreased as the amount of borax increased. The bulk density of $0.79g/\textrm{cm}^3$ and the apparent density of $1.10g/\textrm{cm}^3$ were obtained when the fly ash with 15% of borax was sintered at $1160^{\circ}C$ for 15 minutes. The density also decreased as the plate glass powders past through $212\mu\textrm{m}$ size were mixed. When the fly ash with 12% of glass powder was sintered at $1280^{\circ}C$ for 10 minutes, the bulk and apparent density were $0.90g/\textrm{cm}^3$ and $1.00g/\textrm{cm}^3$, respectively.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.4
• /
• pp.145-152
• /
• 2013

The growth behavior of nanocrystalline diamond (NCD) film has been studied for three different substrates, i.e. bare Si wafer, 1 ${\mu}m$ thick W and Ti films deposited on Si wafer by DC sputter. The surface roughness values of the substrates measured by AFM were Si < W < Ti. After ultrasonic seeding treatment using nanometer sized diamond powder, surface roughness remained as Si < W < Ti. The contact angles of the substrates were Si ($56^{\circ}$) > W ($31^{\circ}$) > Ti ($0^{\circ}$). During deposition in the microwave plasma CVD system, NCD particles were formed and evolved to film. For the first 0.5h, the values of NCD particle density were measured as Si < W < Ti. Since the energy barrier for heterogeneous nucleation is proportional to the contact angle of the substrate, the initial nucleus or particle densities are believed to be Si < W < Ti. Meanwhile, the NCD growth rate up to 2 h was W > Si > Ti. In the case of W substrate, NCD particles were coalesced and evolved to the film in the short time of 0.5 h, which could be attributed to the fact that the diffusion of carbon species on W substrate was fast. The slower diffusion of carbon on Si substrate is believed to be the reason for slower film growth than on W substrate. The surface of Ti substrate was observed as a vertically aligned needle shape. The NCD particle formed on the top of a Ti needle should be coalesced with the particle on the nearby needle by carbon diffusion. In this case, the diffusion length is longer than that of Si or W substrate which shows a relatively flat surface. This results in a slow growth rate of NCD on Ti substrate. As deposition time is prolonged, NCD particles grow with carbon species attached from the plasma and coalesce with nearby particles, leaving many voids in NCD/Ti interface. The low adhesion of NCD films on Ti substrate is related to the void structure of NCD/Ti interface.

• The Journal of Pediatrics of Korean Medicine
• /
• v.20 no.2
• /
• pp.177-196
• /
• 2006

Objective : This experimental study was designed to determine the effects of BPT on obesity in vivo and in vitro. Methods : in vitro, BPTn extracts of various concentration(50, 100, 200 ${\mu}g/m{\ell}$) were added in 3T3-L1 cell. Adipocyte differentiation was measured by Oil Red O staining and Morphological examination. The expression of $C/EBP{\alpha}$ and $PPAR{\gamma}$ receptor was measured by western blot assay and RT-PCR in vivo, Rats were orally administered BPT daily for consecutive four weeks before poloxamer-407 induced hyperlipidemic state. The rats were sacrificed 24 hrs later for poloxamer-407 treated and then serum triglyceride, total cholesterol were measured ; Rats were orally administered BPT daily for consecutive four weeks before triton WR-1339 induced hyperlipidemic state. The rats were sacrificed 40 hrs later for triton WR-1339 treated and then serum triglyceride, total cholesterol were measured ; Rats with obesity were induced by the high fat-diet for six weeks and then serum triglyceride, total cholesterol, LDL-cholesterol, triglyceride, HDL-cholesterol, hydroxy radical, superoxide dismuatse activity were measured. Results : In vitro, The 3T3-L1 cells' differentiation was significantly decreased by BPT. The expression of $C/EBP{\alpha}$ and $C/EBP{\beta}$ was decreased by BPT. In vivo, BPT significantly reduced serum triglyceride, total cholesterol contents in poloxamer-407 treated rat. BPT significantly reduced serum triglyceride contents in Triton WR-1339 treated rat. Total cholesterol also reduced but did not show a significant change. BPT significantly reduced body weight gain of rat and adipose tissue mass of rats and serum triglyceride, LDL-cholesterol contents and significantly increased HDL-cholesterol, HTR(HDL-cholesterol/Total-cholesterol) in rats with obesity induced by the high fat-diet. BPT reduced blood lipid peroxide, hydroxy radical and increased superoxide dismuatse(SOD) activity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.10
• /
• pp.1579-1585
• /
• 2005

The aim of this study was to propose utilization of tofu whey concentrates separated by ultrafiltration (UF) for yogurt production. The curd yogurt was prepared from whole milk added with skim milk Powder in which UF powder was substituted 0$\%$, 6.25$\%$, 12.5$\%$ or 25$\%$ for skim milk powder. The quality characteristics of yogurt in terms of pH, titratable acidity, viscosity, color and viable cell counts were evaluated. There were no significant differences in pH and titratable acidity between control (yogurt added with only skim milk powder) and yogurt added with UF powder after 24 hr of fermentation at 37$^{\circ}C$. Apparent viscosity of yogurt added with UF powder was lower (2,623 $\∼$ 3,189 cps) than that of the control yogurt (3,196 cps). Lightness and redness value of yogurt added with UF powder were not significantly different from control yogurt, while yellowness value increased as the amount of UF powder increased. Addition of UF powder stimulated the growth of lactic acid bacteria. Gas chromatographic analysis detected acetaldehyde, diacetyl, and organic acids, and more volatile compounds were detected in yogurt added with UF powder. Sensory analysis showed that yogurt added with UF powder were evaluated as acceptable as control yogurt. Therefore, UF powder could be substituted for skim milk powder without depressing yogurt qualify.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.7
• /
• pp.1114-1119
• /
• 2003

The aim of this study was to evaluate the effects of Sedum sarmentosum Bunge (SS) on the collagen content of the connective tissues in ovariectomized rats. From day 2 until day 37 after the ovariectomy, Sprague-Dawley female rats were randomly assigned to the following groups: sham-operated rats (Sham), ovariectomized control rats (OVX-control), ovariectomized rats supplemented with SS at 50 mg/kg BW/day (OVX-SS50), 100 mg/kg bw/day (OVX-SS100) and 200 mg/kg bw/day (OVX-SS200), and an ethyl ether fraction of SS at 10 mg/kg bw/day (OVX-EE) and an ethyl acetate fraction of SS at 10 mg/kg bw/day (OVX-EA). The SS ethanol extracts and SS fractions were orally administrated 1 mL per day. The OVX rats were significantly heavier than the sham-operated rats at all time points, but supplementation with the SS extracts tended to gain weight less than OVX-control. Supplementation with the SS extracts prevented a decrease in the collagen level in bone and cartilage tissues. These results are consistent with the conclusions based on the estrogenic activities of SS. Therefore, it may be used to possibly improve the quality of life in menopausal women.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.403-414
• /
• 2011

This study is re-creational experiment of Goryeo gold-painted decoration based on the research of the gold remaining and gold painting technique on the two pieces of Goryeo gold-painted celadon and the three pieces of Chinese gold-painted porcelain on North Song period which ones have been owned by National Museum of Korea since 2007. For the observation of glue state and color developing ability, four kinds of agglutinative agent and gold powder were mixed over the porcelain sherds, then gradually fired from $100^{\circ}C$ to $1200^{\circ}C$. Visual effect and ideal temperature were measured. Among of them, oil and glue showed the best results in glue state and color developing ability. Through those results, the entire Goryeo engraved celadon were reproduced in modern facilities. Oil and glue were gold-painted over the glaze then it was fired at the ideal temperature 700 to $800^{\circ}C$. For observation the binding condition, the gold-painting cross section was looked by the scanning electron microscope (SEM). As the result, oil and glue did not make much difference in Agglutinative agent, but gold was good, the color developing ability, however, in the case of oil, the edge of gold is curled because of its interfacial tension, and it is not dried well at room temperature so the working property is not as good as the glue. Glue more effective in terms of work efficiency, but color developing ability to fall slightly in this experiment were able to see through.