• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1413-1418
• /
• 2003

In this study, the topology optimization is applied to the design of a piezoelectric microactuator satisfying the specific mean transduction ratio(MTR). The optimization problem is formulated to minimize the difference between the specified and the current mean transduction ratio. In order to analyze the response of the piezoelectric-structure coupled system, both the structural and the electric potential are considered in the finite element method. The optimization problem is resolved by using Sequential Linear Programming(SLP) and the results of test problems show that the design of a piezoelectric microactuator with specified mean transduction ratio can be obtained.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전력기술부문
• /
• pp.183-185
• /
• 2002

본 논문에서는 안정적인 변전소의 운영을 위해 최근 개발된 WEB 기반의 초고압 변전설비 원격감시 및 진단 시스템을 소개한다 WEB 기반의 초고압 변전설비 원격 감시 및 진단 시스템은 154kV급 이상의 초고압 변전소에 설치되어 있는 주변압기(MTR)와 가스절연개폐기(GIS)에 대한 감시 및 진단 데이터를 취득하는 Local System과 이러한 데이터를 전송 받아 감시 및 진단 기능과 WEB 서비스를 수행하는 Main Control Center로 구분된다. 실적용 사례로 최근 산업체의 몇 개 공장을 대상으로 시범 적응한 154kV급 변전소의 WEB 기반 감시 및 진단 시스템을 소개한다. 나아가 변전기기를 제어하기 위한 시스템과의 연계 방법에 대해 언급하고 있다.

• International Journal of Quality Innovation
• /
• 제6권2호
• /
• pp.116-130
• /
• 2005

While there are many successful cases where application of the TQM model has reaped substantial benefits (Corcoran, 1996; Hayday, 1996 and Massey, 1996), there is little attempt to further develop the TQM model to meet organisations' development needs. The purpose of this paper is introduce the process of development of a fit-for-purpose management system model to meet the development needs of the MTR Corporation Limited, a metro company of Hong Kong. The new management system model is formulated based on the previous research results, on TQM but comprises a new approach to bridging their pitfalls. The formulation of the TMS elements is based on the common factors of four National Quality Awards (Japan, USA, Europe and Australia) and the critical factors developed by seven studies. These studies include those of Saraph et al. (1989), Flynn et al. (1994), Anderson et al. (1995), Powell (1995), Handfield and Ghosh (1995), Black and Porter (1996), and Ahire et al. (1996).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1885-1887
• /
• 2000

In this paper we introduce preventative and diagnostic systems developed to prevent substations from accidental fault of electric power transmitting apparatus. We propose monitoring and diagnostic system for ultra high voltage GIS and main transformer of 765kV substations as an example of preventative and diagnostic techniques being applied in Korea. We also present a guideline to construct and manage an expert system for this purpose. Finally, an engineering solution as a substation management support system is proposed.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 가을 학술발표논문집 Vol.30 No.2 (1)
• /
• pp.301-303
• /
• 2003

사용자 쓰레드와 시스템 쓰레드간의 1:1 맵핑 모델은 병렬성을 지원하는 장점이 있고, M: N 맵핑은 병렬성 지원과 빠른 문맥교환의 장점이 있다. 리눅스 자바 가상 머신에서는 1:1 맵핑 모델만을 지원한다. 연성 실시간을 보장하기 위해서는 쓰레드간의 문맥교환을 최소화하여 성능 향상시킬 필요가 있다. 이 논문에서는 자바 어플리케이션 레벨에서 경량 프로세스(Light Weight Process, LWP) 개념을 도입하여 리눅스 자바 가상 머신에서 M: N 맵핑을 지원하는 자바 쓰레드 모델을 제안한다. 제안한 모델은 그린 쓰레드 (Green Thread)의 빠른 문맥교환과 네이티브 쓰레드(Native Thread)의 병렬성 지원 장점을 혼합한 것으로 빠른 처리속도와 자바 플랫폼의 독립성을 그대로 유지할 수 있다. 또한, MTR-LS 알고리즘을 경량 프로세스 스케줄링에 채택함으로서, 자바 응용프로그램의 연성 실시간을 보장한다. 1:l 및 M:1 맵핑 모델과의 성능 비교를 통해 제안한 모델이 좋은 성능과 연성 실시간을 보장한다는 것을 보인다.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2089-2094
• /
• 2009

The fault current has increased due to growth of distributed generations for the large power demand in power distribution system. To solve some problem such as excess of the circuit breaker's cut-off ratings, the superconducting fault current limiter(SFCL) has been progressed. However, the operational characteristics of the relay is changed by SFCL. Therefore, the proper impedance for the SFCL should be selected to keep protective coordination with the SFCL when SFCL is introduced on the neutral line of main transformer in distribution system. In this paper, the proper normal conducting resistance was suggested to solve the problem in case of the protection coordination with SFCL.

• 대한기계학회논문집A
• /
• 제28권2호
• /
• pp.206-213
• /
• 2004

In this study, the topology optimization is applied to the design of a piezoelectric microactuator satisfying the specific mean transduction ratio(MTR). The optimization problem is formulated to minimize the difference between the specified and the current mean transduction ratio. In order to analyze the response of the piezoelectric-structure coupled system, both the structural and the electric potential are considered in the finite element method. The optimization problem is resolved by using Sequential Linear Programming(SLP) and the results of test problems show that the design of a piezoelectric microactuator with the specified mean transduction ratio can be obtained.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.54-59
• /
• 2019

The main objective of nuclear reactor safety is to maintain the nuclear fuel in a thermally safe condition with enough safety margins during normal operation and anticipated operational occurrences. In this research, core flow bypass is studied under the conditions of the unavailability of safety systems. As core bypass occurs, the core flow rate is assumed to decrease exponentially with a time constant of 25 s to new steady state values of 20, 40, 60, and 80% of the nominal core flow rate. The thermal hydraulic code PARET is used through these calculations. Reactor thermal hydraulic stability is reported for all cases of core flow bypass.

• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.469-476
• /
• 2020

Research reactors in-core experimental facilities are designed to provide the highest steady state flux for user's irradiation requirements. However, fuel conversion from highly enriched uranium (HEU) to low enriched uranium (LEU) driven by the ongoing effort to diminish proliferation risk, will impact reactor physics parameters. Preserving the reactor capability to produce the needed flux to perform its intended research functions, determines the conversion feasibility. This study investigates the neutron flux in the central experimental facility of two material test reactors (MTR), the IAEA generic10 MW benchmark reactor and the 22 MW s Egyptian Test and Research Reactor (ETRR-2). A 3D full core model with three uranium enrichment of 93%, 45%, and 20% was constructed utilizing the OpenMC particle transport Monte Carlo code. Neutronics calculations were performed for fresh fuel, the beginning of life cycle (BOL) and end of life cycle (EOL) for each of the three enrichments for both the IAEA 10 MW generic reactor and core 1/98 of the ETRR-2 reactor. Criticality calculations of the effective multiplication factor (K_eff) were executed for each of the twelve cases; results show a reasonable agreement with published benchmark values for both reactors. The thermal, epithermal and fast neutron fluxes were tallied across the core, utilizing the mesh tally capability of the code and are presented here. The axial flux in the central experimental facility was tallied at 1 cm intervals, for each of the cases; results for IAEA 10 MW show a maximum reduction of 14.32% in the thermal flux of LEU to that of the HEU, at EOL. The reduction of the thermal flux for fresh fuel was between 5.81% and 9.62%, with an average drop of 8.1%. At the BOL the thermal flux showed a larger reduction range of 6.92%-13.58% with an average drop of 10.73%. Furthermore, the fission reaction rate was calculated, results showed an increase in the peak fission rate of the LEU case compared to the HEU case. Results for the ETRR-2 reactor show an average increase of 62.31% in the thermal flux of LEU to that of the HEU due to the effect of spectrum hardening. The fission rate density increased with enrichment, resulting in 34% maximum increase in the HEU case compared to the LEU case at the assemblies surrounding the flux trap.

• KSBB Journal
• /
• 제22권5호
• /
• pp.362-365
• /
• 2007

Cyanobacterial A-domain의 A3 motif와 A7 motif의 높은 진화론적 보존성에 의거해서 Non-ribosomal peitides를 생산하는 시아노박테리아를 Screening할 수 있는 degenerated primer를 만들 수 있었다. Degenerate primer서열의 종류는 가능하면 1,000개 정도까지를 기준으로 만드는 것이 좋다. Primer의 종류가 너무 많으면 primer 1종류 당 mol수가 적게 되어 특이성도 저하된다. 그러므로 Primer의 종류가 많을 경우는 inosin을 N (4종류의 염기) 부분에 이용하면 어느 염기에도 강하게 결합하지 않고 두 가닥 DNA 형성을 저해하지도 않으므로 degeneration을 줄이는데 도움이 된다. Degenerate primer의 annealing 온도는 primer에 포함되어있는 서열 중 가장 낮은 Tm을 기준으로 한다. 이번 연구처럼 N (ACGT) 대신에 Inosin을 이용하였을 때에는 Inosin이 Tm을 높게 하지 않고 Tm을 낮게 하지도 않으므로 Tm 계산시 고려하지 않아도 되었다. PCR 효율이 떨어질 우려가 있으므로 충분한 Tm값 (대개 $45\sim60^{\circ}C$ 이상)을 갖는 서열을 디자인하여 primer로 PCR하는 것이 좋지만, A3/A7 degenerate prime에서는 실험에 의해 40$^{\circ}C$로 annealing 온도가 (Tm) 다소 낮게 설정되었다. 그러므로 검출되지 않은 NRPS gene을 가진 균주와 CBT635, CBT654와 같이 약한 PCR band의 형성은 새로 제작된 primer의 낮은 Tm 기인한다고 생각되어진다. Tm의 이론적인 값은 Tm ={(G+C)*4+(A+T)*2}의 식을 통해서 정방향 primer에서 54$^{\circ}C$ 역방향 primer에서 42$^{\circ}C$로 계산되었다. 새로운 degenerate primer에 의해서 MTF2/MTR2로 검출되지 않는 6개의 균주가 더 검출되었으며, A3/A7과 MTF2/MTR2를 이용한 통합 PCR Screening을 통해서 NRPS gene 검출에 특이성과 효율성을 높일 수 있다.