• Elastomers and Composites
• /
• v.25 no.2
• /
• pp.112-116
• /
• 1990

In this study, as one way of developing the new cross-linking method that is curable in water, kinetic analysis of solution reaction between CR and silane coupling agents was attemped. First, CR was reacted with silane coupling agents in solution state. According to the time, reaction quantity was pursued by gas chromatography. Also, reaction rate coefficient and activation energy were calculated from the reaction quantity. Silane coupling agents which were used in this study were MPS, CPS and VES.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.239-244
• /
• 2009

The gridless (or meshfree) methods, such as MPS, SPH, FPM an so forth, are feasible and robust for the problems with moving boundary and/or complicated boundary shapes, because these methods do not need to generate a grid system. In this study, a gridless solver, which is based on the combination of moving least square interpolations on a cloud of points with point collocation for evaluating the derivatives of governing equations, is presented for two-dimensional unsteady incompressible Navier-Stokes problem in the low Reynolds number. A MAC-type algorithm was adopted and the Poission equation for the pressure was solved by successively in the moving least square sense. Some weighing functions were tested in order to investigate the up-winding effect for the convection term. Some typical problems were solved by the presented solver for the validation and the results obtained were compared with analytic solutions and the numerical results by conventional CFD methods, such as FVM.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.1
• /
• pp.93-101
• /
• 2013

The incident bore impact loads acting on a tall structure is simulated using the refined Moving Particle Simulation (MPS) method. The particle method is more feasible and effective than conventional grid-based methods for the violent free-surface problems. In the present study, the simulation results for the temporal change of the hydrodynamic force on the structure and longitudinal velocity component around the structure are compared with the experiments (Radd and Bidoae, 2005). And the mitigation effects by installation of various obstacles in front of the main structure are investigated and discussed form the simulation results.

• Journal of mucopolysaccharidosis and rare diseases
• /
• v.4 no.1
• /
• pp.21-25
• /
• 2018

Fabry disease is a hereditary lysosomal storage disorder caused by the reduction or absence of lysosomal enzyme alpha-galactosidase A and the accumulation of glycosphingolipids, such as globotriaosylceramide (Gb3), in various organs, including the heart. The prevention of cardiac involvement in Fabry disease can only be achieved by enzyme replacement therapy (ERT), and the method of assessing the efficacy of ERT should be confirmed. Changes in the electrocardiogram, such as the shortening of PQ interval, prolongation of QTc and repolarization abnormalities as well as left ventricular hypertrophy in voltage criteria, can be used to identify Fabry disease patients; however, the usefulness of electrocardiograms for evaluating the efficacy of ERT is limited. The assessment of left ventricular hypertrophy using echocardiography has been established to evaluate the efficacy of ERT during long-term period. A new technique involving speckled tracking method might be useful for detecting early cardiac dysfunction and identifying the effect of ERT for a relatively short period. The estimation of left ventricular hypertrophy using cardiac magnetic resonance (CMR) is also useful for assessing the efficacy of ERT. Identifying late gadolinium enhancement in CMR may affect the effectiveness of ERT, and the new technique of T1 mapping might be useful for monitoring the accumulation of Gb3 during ERT. Histopathology in cardiac biopsy specimens is another potentially useful method for identifying the accumulation of GB3; however, the use of histopathology to evaluate of the efficacy of ERT is limited because of the invasive nature of an endomyocardial biopsy.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.1
• /
• pp.12-19
• /
• 2014

Tsunamis are ocean waves generated by movements of the Earth's crust. Several geophysical events can lead to this kind of catastrophe: earthquakes, landslides, volcanic eruptions, and other mechanisms such as underwater explosions. Most of the damage associated with tsunamis are related to their run-up onto the shoreline. Therefore, effectively predicting the run-up process is an important aspect of any seismic sea wave mitigation effort. In this paper, a numerical simulation of the behaviors of a floating body near a quaywall during a tsunami is conducted by using a particle method. First, a solitary wave traveling over shallow water with a slope is numerically simulated, and the results are compared with experiments and other numerical results. Then, the behaviors of floating bodies with different drafts are investigated numerically.

• Journal of the Korea Convergence Society
• /
• v.10 no.2
• /
• pp.201-206
• /
• 2019

The flooding and overtopping due to unexpected large ocean wave may occur serious problems to environments and structures. Generally fixed wave breakers and several structures were installed to prevent such damages, however, they may affect to environments and charted path of ships badly. In this regard, new type of initial wave breaker was investigated in both of experimentally and numerically. For the experiments, conceptual devices were built by authors with stereo vision system. The moving particle semi-implicit method was adopted for simulation. It is revealed that the initial wave breaker reduce the damages from ocean waves by energy dissipated earlier. Furthermore, the effects of position of the initial wave breaker was also considered.

• Journal of the Korea Concrete Institute
• /
• v.20 no.3
• /
• pp.317-323
• /
• 2008

In the current study, A model for the flow analysis of fresh and highly flowable concrete has been developed using a particle method, the moving particle semi-implicit (MPS) method. The phenomena on the flow of concrete has been considered as a visco-plastic flow problem, and the basic governing equation of concrete particle dynamics has been based on the Navier-Stokes equation in Lagrangian form and the conservation of mass. In order to formulate a visco-plastic flow constitutive law of fresh concrete, concrete is modeled as a highly viscous material in the state of non-flow and as a visco-plastic material in the state of flow after reaching the yield stress of fresh concrete. A flow test of fresh concrete in the L-box was simulated and the predicted flow was well matched with the experimental result. The developed method was well showed the flow motion of concrete particles because it was formulated to be based on the motion of visco-plastic fluid dynamics.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.6
• /
• pp.410-418
• /
• 2012

Parametric stereo(PS) and MPEG surround(MPS) are major spatial audio coding(SAC) tools. In this paper, the problem of the inter-channel correlation(ICC) synthesis in the conventional SAC is analyzed. Conventional methods assume that ambient components mixed to two output channels are anti-phased, while the primary components are assumed to be in-phased. This assumption can cause excessive ambient mixing for a negative-valued ICC. As a remedy to this problem, we propose a new ICC synthesis method based on an assumption that the primary components are anti-phased each other for a negative ICC. The proposed method is also applied to the approximation which works in practice. The performance of the proposed method was evaluated by computer simulations and the subjective listening tests verified that the proposed method is effective in not only headphones but also loudspeakers playback.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8455-8461
• /
• 2015

In this paper, we propose new search algorithms using SVD(Singular Value Decomposition) for fast search of Raman spectrum. In the proposed algorithms, small number of the eigen vectors obtained by SVD are chosen in accordance with their respective significance to achieve computation reduction. By introducing pilot test, we exclude large number of data from search and then, we apply partial distance search(PDS) for further computation reduction. We prepared 14,032 kinds of chemical Raman spectrum as the library for comparisons. Experiments were carried out with 7 methods, that is Full Search, PDS, 1DMPS modified MPS for applying to 1-dimensional space data with PDS(1DMPS+PDS), 1DMPS with PDS by using descending sorted variance of data(1DMPS Sort with Variance+PDS), 250-dimensional components of the SVD with PDS(250SVD+PDS) and proposed algorithms, PSP and PSSP. For exact comparison of computations, we compared the number of multiplications and additions required for each method. According to the experiments, PSSP algorithm shows 64.8% computation reduction when compared with 250SVD+PDS while PSP shows 157% computation reduction.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.3
• /
• pp.249-257
• /
• 2015

A fuel assembly consists of fuel rods composed of pellets (UO2) and a cladding tube (Zircaloy). The role of the fuel rods in the reactor is to generate heat by nuclear fission, as well as to retain fission products during operation. A simulation method using a computer program was used to evaluate the safety of the nuclear fuel rods. This computer program has been called the fuel performance code. In the analysis of a light water reactor fuel rod, the gap conductance, which depended on the distance between the pellets and cladding tube, mainly influenced the thermomechanical behavior of the fuel rod. In this work, a 3D gap element was proposed to simulate the thermo-mechanical behavior of the nuclear fuel rod, considering the gap conductance. To implement the proposed 3D gap element, a 3D thermo-mechanical module was also developed using FORTRAN90. The asymmetric characteristics of the nuclear fuel rod, such as the MPS (missing pellet surface) and eccentricity, were simulated to evaluate the proposed 3D gap element.