• Journal of Food Hygiene and Safety
• /
• v.34 no.5
• /
• pp.421-430
• /
• 2019

In this study, 195 pesticide residues in fruit samples (n=150) at local markets in Chungcheongnam-do Chungnam, Korea were monitored using a multi-residue method combined with GC-MS/MS and LCMS/MS. Among 150 fruit samples, 40 types of pesticides were detected in 63 samples and the detection rate was 42.0%. However, the amounts were below the maximum residue limit (MRL). Detection rates for pesticides in each thpe of fruit were as follows ; citrus fruits (55.2%), pome fruits (41.3%), berries (38.7%) and stone fruits (36.0%). Although the sample size was small (n=2), pesticide residues were not detected in tropical fruits. Occurrences of detection of pesticide residues in apple showed the highest level, and mainly, insecticides were detected most frequently. The most commonly detected pesticides residues were bifenthrin (21), pyraclostrobin (17), novaluron (13), boscalid (10), chlorfenapyr (9), trifloxystrobin (9), furathiocarb (9), acetamiprid (8) and chlorpyrifos (8). Five types of residual pesticides (bifenthrin, chlorfenapyr, deltamethrin, fenpropathrin and fenvalerate) were detected in quince, and out of these five, fenpropathrin exceeded the MRL based on the Positive List System (PLS). These results suggested that pesticide residues in fruit samples should be continuously monitored, although residue levels in 63 other fruit samples were evaluated as being within a safe level.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.4
• /
• pp.947-960
• /
• 1996

The primary goal for developing high performance ATM switching systems is to minimized the probability of cell loss, cell delay and deterioration of throughput. ATM switching element that is the most suitable for this purpose is the shared buffer memory switch executed by common random access memory and control logic. Since it is difficult to manufacture VLIS(Very Large Scale Integrated circuit) as the number of input ports increased, the used of switching module method the realizes 32$\times$32, 150 Mb/s switch utilizing 8$\times$8, 600Mb/s os 16$\times$16, 150Mb/s unit switch is latest ATM switching technology for small and large scale. In this paper, buffer capacity satisfying total-memory-reduction effect by buffer sharing in a shared buffer memory switch are analytically evalu ated and simulated by computer with cell loss level at traffic conditions, and also features of switching network utilizing the switching module methods in small and large-capacity ATM switching system is analized. Based on this results, the structure in outline of 32$\times$32(4.9Gb/s throughput), 150Mb/s switches under research in many countries is proposed, and eventually, switching-network structure for ATM switching system of small and large and capacity satisfying with above primary goals is suggested.

• Korean Journal of Food Science and Technology
• /
• v.39 no.1
• /
• pp.99-103
• /
• 2007

In order to evaluate innate flavor during the roasting process, the components responsible for the aroma of unroasted Polygonatum odoratum root and the volatile odor components released during the roasting process were evaluated using the solid phase-microextraction (SPME) headspace method. The raw P. odoratum root contained aldehyde, alcohol, hydrocarbon and acid components, which gave it a grass-like smell. 2-Methylpyrazine was not revealed from the roasted P. odoratum root at $110^{\circ}C$ and $130^{\circ}C$, but was extracted at $150^{\circ}C$. The 2,5-dimethylpyrazine component was the greatest at $130^{\circ}C$. The hexanal component was greater when the root was roasted at $110^{\circ}C$, compared with those at $130^{\circ}C$ and $150^{\circ}C$. The production of 2-acetyl-1-pyrroline component was the greatest when it was roasted at $130^{\circ}C$. Quantitative descriptive analysis of P. odoratum after roasting revealed a high concentration of 2,5-dimethylpyrazine at $130^{\circ}C$ and $150^{\circ}C$, but a low concentration at $110^{\circ}C$. Most of the 2-acetyl-1-pyrroline, which significantly affected its smell, was revealed at $130^{\circ}C$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.4
• /
• pp.447-454
• /
• 2001

For determining the relative genetic effects of Duroc (D) and Taoyuan (T) breeds on the economic traits of their hybrids, 72 litters of pigs, from four mating types, namely TT (T♂$\times$T♀), DD (D♂$\times$D♀) and D-T hybrids (TD, T♂$\times$D♀ and DT, D♂$\times$T♀) were used in this study. The various crossbreeding parameters were estimated by comparisons among mating types using linear contrasts of least-square analysis. The results of reproductive traits analysis showed that T breed had contributed superior genetic effects on the total number of piglets at birth (TBN) (p<0.10) and number of live piglets at 21 days (LP21) (p<0.05) to the D-T hybrids. Estimates of maternal genetic effects showed that the T females were superior in TBN (p<0.05), but inferior in average birth weight (ABW) and average litter birth weight (LBW) (p<0.01) to the D females. Direct heterosis effects were significant for LBW, LP21 and LWT21 (p<0.01). Least-squares analysis of other economic traits showed that T breed had relative negative effects on all growth traits, withers height (WH), body type index (BTI), average backfat thickness (ABF), carcass length (LENG), loin eye area (longissimus) (LEARA), and lean percentage (LEAN) of D-T hybrids (p<0.05). Estimates of direct genetic effects showed that the D breed was superior to the T breed in all growth and carcass traits except the average backfat (BF). Estimates of maternal genetic effects showed that average body weight at 180 days (WT180) of progenies from T sows were lighter than from D sows. Progenies from D females had larger and leaner carcass than those from T females. Direct heterosis effects were significant for average daily weight gains from 150 to 180 days ($ADG_{150-180}$) (p<0.05) and for average body weights at 150 (WT150), and 180 days (WT180), average daily weight gains from birth to 150 and 180 days ($ADG_{150}$ and $ADG_{180}$, respectively), WH, body length (BL), ABF, BTI, and LENG (p<0.01). The results showed that D-T hybrids tended to have superior TBN and LP21 than D breed, and to be superior in all growth and most conformation and carcass traits to the T breed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.25-32
• /
• 2016

The purpose of this study is to evaluate the performance on the compressive bonding shear strength of ultra-high strength steel fiber reinforced cementitous composites(UHSCC). As a result of compressive bonding shear strength through Direct shear test, It was found that the specimen($150{\times}150{\times}150mm$) of NC(Normal concrete) + NC showed similar compressive bonding shear strength at whole experimental level. On the other hand, the specimen of UHSCC + UHSCC showed decrease of compressive bonding shear strength from after 30 minutes of the retarded placement than 0 minute. As a result of analyzing failure mode of bonding interface, It was found that the specimen of NC + NC showed mixed failure at whole experimental level. In case of the specimen of UHSCC + UHSCC, it showed interface failure from the specimen that are 30 minutes, 60 minutes and 90 minutes of delay of concrete placing. As a result of analyzing XRD test in terms of the placement interface on the specimen of NC and UHSCC, relatively much amount of $SiO_2$ was detected from the specimen of UHSCC than that of NC. It is judged that the most of main components of coating film shown in the specimen of UHSCC is $SiO_2$. In conclusion, it is judged that UHSCC which is made from after 30 minutes of delay of concrete placing is unable to be used as structural member because of deterioration of bonding performance. From later study, it is judged that the improvement of bonding performance from the part of cold joint occurrence is necessary through the interface preparation method.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.103-114
• /
• 1994

Pearl millet is a $C_4$ plant and summer crop originated from west Africa, and the sixth most important cereal in the world and the most widely cultivated millet in the semi-arid tropics as a major staple food crop. Its grain of higher quality protein is used to make unleavened bread chapatis and prepared as gruel, dumplings, couscous and beer. It is also used as animal feed and forage in both temperate and tropical regions because it has a capability to grow well not only in the fertile soil, but also in the poor and dry soil. Most of the current breeding procedures used in pearl millet are aimed at maximum exploitation of hybrid vigor for both grain and forage yields in Korea. Pearl millet is ideally suited for exploitation of heterosis using cytoplasmic male sterile lines as seed parent, and fertile inbred lines and open-pollinated cultivars as pollen parent. Pearl millet hybrids developed in Korea produced 3 to 7 tons of grain and 100 to 150 tons of green fodder per hectare.

• Journal of the Korean housing association
• /
• v.13 no.6
• /
• pp.141-150
• /
• 2002

The disabled peoples increase in number by disasters from the industrialization and urbanization. The physically handicapped people experience many difficulties in using the facilities in the public buildings. So, this survey proposed the necessary conditions for the handicapped peoples to use without any trouble in public buildings. The objects of investigation were public buildings, village offices, a public library, synthesis hospitals banks, an express bus station, a wedding building, a railroad station etc.. Conclusions were as follow \circled1 The most of buildings were established access road in regulations but parking area was established inappropriately in regulations \circled2 The most of convenience facilities were concentrated on first floor but were established barely in more than second floor. \circled3 The most of convenient facilities were established in appropriately in regulations. \circled4 The other convenient facilities(reception desk, ticket agency, work desk etc.) were not established nearly in the buildings of investigation.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.2
• /
• pp.139-150
• /
• 2004

Development of the paper coating technologies to prevent print mottle is needed to obtain high quality printing. Printing mottle is recognized as the most common printing problems in using coated paper and which is one of the most difficult problems to solve in offset printing. Print mottle is one of the most important quality properties of printed products and manufacturers strive to improve the paper surface to gain higher and more even print mottle. The prevention of printed mottle requires of coating color formation, especially the minimum of binder migration. The results the uniformity of liquid absorption by paper at very short contact time between paper and testing printing liquids.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.2
• /
• pp.13-22
• /
• 2012

This research attempts to analyze communication effects of print ad having pictorial typography. 150 Questionnaires were distributed to respondents staying Daejeun City and 148 copies were retreated for five days from April 22nd to 26th, 2012. Frequency analysis, factor analysis, Cronbach's alpha for reliability analysis were utilized for data analysis with SPSS 12.0. For testing hypothesis, regression analysis was used. As result of testing hypothesis, 'informative, beneficial, creative, reliable' were partially significant to attitude towards print ad having pictorial typography. That means 'creative' and 'reliable' were insignificant, while 'informative' and 'beneficial' are significant. Variable of the most influencing on attitude towards advertising is 'informative.' 'Informative, beneficial, creative, and reliable' were partially significant to brand attitude, too. That means 'beneficial' and 'creative' were insignificant, while 'informative' and 'reliable' were significant. Variable of the most influencing on brand attitude was 'reliable.' Therefore, to enhance communication effect of print ad having pictorial typography, 'informative' and 'reliable' are most significant variables.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.18 no.1
• /
• pp.29-36
• /
• 2016

In consumption of lily flowers on wreaths for congratulation and condolences, use of real lily flowers accounted for 40.4% when customers ordered and confirmation of real flowers after receiving delivery of the wreaths accounted for 42.4%. The most popular price of wreaths for congratulation and condolences was 100,000 won -150,000 won accounting for 69.5%. The most popular ordering season is July accounting for 15% and the price per each flower was 16,765 won. The proportion of using lily flower on wreaths was 98% for congratulation and 91% for condolences. The most frequent numbers of lily flowers as a point flowers on wreaths were 5-10 on average. Among 500 wreaths for congratulation and condolences each, the proportion of artificial lily flowers were 470 for congratulations and 425 for condolences, which were considerably high rates.