• 제목/요약/키워드: MOSE

검색결과 46건 처리시간 0.03초

Stepwise Inertial Control of a Doubly-Fed Induction Generator to Prevent a Second Frequency Dip

  • Kang, Mose;Lee, Jinsik;Hur, Kyeon;Park, Sang Ho;Choy, Youngdo;Kang, Yong Cheol
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권6호
    • /
    • pp.2221-2227
    • /
    • 2015
  • To arrest a frequency nadir, a stepwise inertial control (SIC) scheme generates a constant active power reference signal of a wind turbine generator (WTG) immediately after a disturbance and maintains it for the predetermined time. From that point, however, the reference of a WTG abruptly decreases to restore the rotor speed for the predefined period. The abrupt decrease of WTG output power will inevitably cause a second frequency dip. In this paper, we propose a modified SIC scheme of a doubly-fed induction generator (DFIG) that can prevent a second frequency dip. A reference value of the modified SIC scheme consists of a reference for the maximum power point tracking control and a constant value. The former is set to be proportional to the cube of the rotor speed; the latter is determined so that the rotor speed does not reach the minimum operating limit by considering the mechanical power curve of a DFIG. The performance of the modified SIC was investigated for a 100 MW aggregated DFIG-based wind power plant under various wind conditions using an EMTP-RV simulator. The results show that the proposed SIC scheme significantly increases the frequency nadir without causing a second frequency dip.

전력 반도체 응용을 위한 HVPE법에 의한 Ga2O3 에피성장에 관한 연구 (Ga2O3 Epi Growth by HVPE for Application of Power Semiconductors)

  • 강이구
    • 전기전자학회논문지
    • /
    • 제22권2호
    • /
    • pp.427-431
    • /
    • 2018
  • 본 논문에서는 최근 전력반도체 산업에서 활용되어지는 와이드밴드갭 반도체 중에 하나인 $Ga_2O_3$를 이용한 에피웨이퍼 성장에 관련되어 서술하였다. GaN 성장시 활용되어지는 HVPE법을 이용하여 Sn이 도핑된 $Ga_2O_3$ 기판웨이퍼에 평균 $5.3{\mu}m$ 두께로 성장시켰다. 일반적으로 화합물반도체의 에피 두께가 $5{\mu}m$일 경우 SiC의 경우 600V 전력반도체소자를 제작할 수 있으며, $Ga_2O_3$ 에피웨이퍼의 경우에는 1000V이상의 전력소자를 제작할 수 있다. 성장된 에피웨이퍼의 J-V 측정 결과 $2.9-7.7m{\Omega}{\cdot}cm^2$의 온저항을 얻을 수 있었으며, 역방향의 경우 상당히 높은 전압에서도 누설전류가 거의 없음을 알 수 있었다.

기상특성에 따른 교통사고 안전성 평가지표 개발 (고속도로를 대상으로) (Development of Traffic Accident Safety Index under Different Weather Conditions)

  • 박준태;홍지연;이수범
    • 대한교통학회지
    • /
    • 제28권1호
    • /
    • pp.157-163
    • /
    • 2010
  • 기상상태에 따른 교통사고발생 및 사고심각도는 밀접한 관계가 있음이 잘 알려져있다. 최근고속도로에서 교통 안전성 평가지표 및 시스템의 개발은 사고 치명도를 줄이고자 접근하는 것이다. 본 연구에서는 도로선형 요소와 기상 상태를 고려한 교통사고 영향 요인을 분석하여 규명하고자 한다. 기상상태요인과 도로요인과의 교통사고 발생 관계를 규명하기 위하여 과거사고이력자료를 이용하여 판별분석을 수행하였으며 눈, 맑음, 비, 안개, 흐림의 5가지 유형에 대해 도로 구성요소인 노면과 경사도를 통해 구분하였다. 그 결과 콘크리트 노면과 하향경사 3%이상인 구간에서 각 기상상태 별 사고영향이 다르며 이러한 주행환경에서는 시정거리의 감소와 정지거리의 증가가 주행 위험요인으로 발생할 수 있는 구간이다. 본 연구에서는 기상악화시 콘크리트 노면과 하향경사가 형성된 구간이 평상시 보다 주행시 주의를 필요로 하는 구간임을 분석하였으며 분류함수의 계수 비교를 통해 영향지표를 개발하였다.

1981年 夏季 東海沿岸域의 異常底水溫現象 (On the Abnormal Cooling Phenomenon in the Coastal Areas of East Sea of Korea in Summer,1981)

  • 홍철훈;조규대;양성기
    • 한국해양학회지
    • /
    • 제19권1호
    • /
    • pp.11-17
    • /
    • 1984
  • 1981년 7월 7일~12일 기간중 동해에서의 해양관측 결과와 국립수산진흥원 (1961~1981년) 및 일본 기상청 자료(1975, 1981년)를 분석한 결과, 1981년 하계의 1$0^{\circ}C$ 등온선이 130 E선의 35 30 N 이남 해역에서 약 75m 이심에 나타났으나 이 이북 해역에서부터 20~30m로 급격히 상승했다. 한편, 1966~1981년의 130 E선 에서 35 N~37 30 N의 3정점의 깊이 100m의 수온표준편차는 2~4$^{\circ}C$로서 변동폭이 매우 컸다. 1981년 하계의 수온 편차는 표준 편자의 1.5배 이상이며, 수심 150m 이천은 평년에 비해 5~1$0^{\circ}C$ 낮았다. 특히 1$0^{\circ}C$ 등온선이 평년보다 20~120마일 남하하여 35 N~36 N 해역에 까지 이르렀다. 이상의 결과를 종합해 볼 때 1981년은 약 15년 (1966~1981년) 동안에 처음 있는 이상 저수온년이었다.

  • PDF

인터넷 서비스의 접속지연에 대한 MOS 평가 (Evaluation of MOS for the Access Delay of Internet Service)

  • 이훈;이영옥
    • 한국통신학회논문지
    • /
    • 제34권9B호
    • /
    • pp.900-907
    • /
    • 2009
  • 최근 인터넷을 이용하여 웹 접속이나 파일전송 뿐만 아니라 음성, 비디오, 온라인게임 등 다양한 실시간미디어를 제공할 수 있게 되었다. 이에 따라 실시간미디어에 대한 서비스품질향상에 대한 관심이 증대된 반면 최선형 서비스에 속하는 인터넷접속서비스에 대해서는 관심을 가지고 있지 않았다. 그러나 통신서비스의 품질에 대한 가입자의 관심이 커지게 됨에 따라 실시간미디어에 대해서 차별화된 서비스를 제공함으로써 생겨나는 비실시간서비스의 상대적인 품질열화에 대한 우려도 생겨나게 되었다. 특히 기존의 인터넷서비스에 대한 사용자들의 네트워크접속지연에 대한 관심이 증대하게 되었다. 본 연구에서는 이와 같은 추세의 변화에 대응하기 위하여 인터넷서비스를 제공함에 있어서 가입자가 체감하는 접속지연에 대해서 주관적인 품질을 평가하는 방법을 제안하고 실제로 사용 가능한 평가시스템을 개발하여 가입자의 MOS를 평가하여 인터넷서비스의 지연품질에 대한 가입자의 민감도를 고찰한다.

인삼의 환경 및 기주조건과 발병과의 관계 (Diseases of Ginseng: Environmental and host effect on disease outbreak and growth of pathogens.)

  • 오승환
    • Journal of Ginseng Research
    • /
    • 제5권1호
    • /
    • pp.73-84
    • /
    • 1981
  • Effect of environmental factors and host on the growth and outbreak of various ginseng diseases was reviewed Environmental lectors included hydrogen ion concentration, moisture content, temperature, nutrition, and microbiol populations. Age of the ginseng plants in relation to several ginseng disease occurrence was also included in order to formulate the effective control measure for ginseng diseases. Damping-off caused by Rhizoctonia, Pythium, and Phytophthora, greymold by Botrytis, sclerotinia by Scleretinia, and phytophthora blight caused by Phytophthora were usually prevalent during the early growing season of ginseng when temperature is below 20$^{\circ}C$, while anthrac se caused by Colletotrichum, alternaria blight by Alternaria, and bacterial soft rot by Erwinia were so during the latter growing season when temperature is above 25$^{\circ}C$. However, the root rot incited by Fnarium and Cylindrocarpon caused severe damages throughout the growing season. Growth range of the temperature for a pathogen was highly related to the corresponding disease outbreak. Hydrogen ion concentration was highly related to the outbreak of sclerotinia, root rot, and red rot. Most severe outbreak of those diseases where the soil acidity was pH 4.7, pH 6.5- 7.5, and pH6.0-6.5, respectively. Nitrogen content in the soil was also related to outbreak of root rot and red rot. More red rot occurred where NH,-nitrogen is above 30 ppm and more root rot obtained when excessive nitrogen fertilizer applied. Yellow necrosis apparently was related to magnesium especially its ratio with potassium or calcium content in a soil. Fusarium Population showed significant .relations to missing rate of ginseng Plants in a Implanting ginseng field, while that of total bacteria showed similar relations in all ginseng field, However, in six year old ginseng fields, the more the Streptomyces population was, the less the Fusarium obtained. Consequently, less missing rate observed in a field where Streptomyces population was high. Damping-off, root rot, Rhytophthor a blight were mose severe on the nursery and on 2-3 years old ginseng plants, whereas sclerotinia, and grey cod, alteraria blight, anthracnose were severe on 4-6 years old ginseng plants. Root rot caused by Fusarium and Erwinia, however, was also severe regardless of the age of the plants when the roots were injured. Therefore, for the effective control of ginseng root rot most careful control of the disease during the early year should be rendered.

  • PDF

하천의 하상변동 예측을 위한 수치모형의 보정 및 검증에 관한 연구 (Numerical Model Calibration and Verification for Riverbed Change Prediction)

  • 김권한;지운;여운광;정원준
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2010년도 학술발표회
    • /
    • pp.1739-1744
    • /
    • 2010
  • 하천에서 유사이송 및 하상변동을 예측하는 여러 방법들 중 수치모형을 이용하는 방법이 현재 가장 많이 이용되고 있으며 특히 단일 유사량 산정 공식과 유사이송 형태를 현장자료와의 검증과정 없이 대부분 그대로 적용하고 있는 실정이다. 수치모형을 이용한 특정 대상하천의 정확한 하상변동 예측을 위해서는 유사량 산정 공식 및 유사 이송 형태에 따른 하상변동 민감도 분석 및 모형 검증과 검정 작업이 반드시 필요하며 이러한 과정을 통해 대상하천에 대한 최적의 유사량 산정 공식과 유사 이송 형태를 선정해야 할 것이다. 본 연구는 실제하천을 대상으로 여러 유사량 산정 공식과 유사 이송 형태를 다르게 적용이 가능한 CCHE2D 모형을 이용하여 하상변동 수치모의를 수행하였다. 유량 크기별 모의조건을 적용하여 하상변동 민감도를 분석을 통해 대상하천에서 적합한 유사량 공식과 이송 형태를 선정하고 실제수문사상의 유량 및 수위 조건을 적용하여 모의를 수행한 결과와 대상 하천에서 측량한 단면과 비교하여 검정을 실시하였다.

  • PDF

Kapur 방법과 형태학적 특징을 이용한 자궁경부암 세포 추출 및 인식 (Detection and Recognition of Uterine Cervical Carcinoma Cells in Pap Smear Using Kapur Method and Morphological Features)

  • 김광백
    • 한국정보통신학회논문지
    • /
    • 제11권10호
    • /
    • pp.1992-1998
    • /
    • 2007
  • 자궁 경부 세포진 영상의 효과적인 세포핵 영역 추출과 인식 및 분류를 위해서는 세포진 영상의 배경 그리고 세포핵과 세포질 영역의 정확한 구분이 중요하다. 본 논문에서는 자궁 경부 세포진 영상에서 세포핵 영역과 배경을 효과적으로 분할하기 위 해 Median 필터를 적용하여 전체적인 영상의 명암값을 보정한 후, Gaussian 필터를 적용하여 그레이 영상에서 존재하는 잡음을 제거한다. Kapur 방법을 통해 배경과 세포의 엔트로피 누적 확률을 이용하여 영상을 이진화 한다. 자궁 경부진 영상에서는 군집화된 세포 영 역 이 빈번하게 나타난다. 군집화가 심화된 세포영역에서는 그 영역의 평균 명암도 값을 이용하여 세밀하게 영역을 재분할 한다. 그런 후, 미세잡음을 제거하기 위해 $3{\times}3$ 마스크를 적용하여 미세한 잡음을 제거 한 후, 8 방향 윤곽선 추적 알고리즘을 적용하여 분할된 영역에서 세포들의 후보영역을 추출한다. 추출된 세포영역은 크기, 면적 비율, 핵 외곽의 방향성 정보를 이용하여 정상 세포와 암세포를 인식 및 분류한다. 실험 결과에서는 제안된 방법의 성능이 전문의와 소견과 비교적 근접한 것을 보여준다.

자율협력 주행 도로교통 보안기관 설립 및 운영을 위한 방안 연구 (A Study on the Establishment and Operation of Autonomous Cooperative Road Traffic Security Institutions)

  • 김모세;김기천
    • 한국ITS학회 논문지
    • /
    • 제22권1호
    • /
    • pp.208-218
    • /
    • 2023
  • 자율주행 자동차에 대한 연구가 활발하게 진행되고, 상용화를 위한 시도가 각 나라에서 진행되고 있다. 우리나라에서도 자율협력 주행의 상용화를 위해 국토교통부의 주관하에 인프라 구축 사업이 진행되고 있다. 자율협력 주행을 위한 안전한 인프라 구축을 위해서는 인프라를 구성하는 요소에 대한 보안 운영을 담당하는 보안 기관의 존재가 필수적이다. 하지만 현재 한국에 해당 역할을 진행할 수 있는 도로교통 보안기관이 존재하지 않는다. 본 논문에서는 도로교통 보안 기관 설립 및 운영방안을 마련하기 위해 현재 운영 중인 국내의 다른 보안 기관 그리고 관련 법안 정보통신기반 보호법과 주요 정보통신 기반시설 보호지침을 분석하고, 이를 분석한 결과를 바탕으로 C-ITS의 체계에 적절하게 현행법의 수정 방향을 제시하여, C-ITS 도로교통 보안 기관 설립 및 운영방안을 제안한다.

바인더 젯팅 적층제조기술을 활용한 다공성 세라믹필터 제작 (Fabrication of Ceramic Filters via Binder Jetting Type 3D Printing Technology)

  • 권모세;최종한;황광택;최정훈;한규성;김응수;김진호
    • 한국재료학회지
    • /
    • 제33권7호
    • /
    • pp.285-294
    • /
    • 2023
  • Porous ceramics are used in various industrial applications based on their physical properties, including isolation, storage, and thermal barrier properties. However, traditional manufacturing environments require additional steps to control artificial pores and limit deformities, because they rely on limited molding methods. To overcome this drawback, many studies have recently focused on fabricating porous structures using additive manufacturing techniques. In particular, the binder jet technology enables high porosity and various types of designs, and avoids the limitations of existing manufacturing processes. In this study, we investigated process optimization for manufacturing porous ceramic filters using the binder jet technology. In binder jet technology, the flowability of the powder used as the base material is an important factor, as well as compatibility with the binder in the process and for the final print. Flow agents and secondary binders were used to optimize the flowability and compatibility of the powders. In addition, the effects of the amount of added glass frit, and changes in sintering temperature on the microstructure, porosity and mechanical properties of the final printed product were investigated.