• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1463-1465
• /
• 1994

The electrical characteristics of $Al/Ta_2O_5/Si$ metal-oxide-semiconductor (MOS) capacitors were studied. $Ta_2O_5$ films on p-type silicon had been prepared by ionized cluster beam epitaxy technique (ICBE). This $Ta_2O_5$ films have low leakage current, high breakdown strength and low flat band shift. In this research, a single crystalline cpitaxial film of $Ta_2O_5$ has been grown on p-Si wafer using an ICBE technique. The native oxide layer ($SiO_2$) on the silicon substrate was removed below $500^{\circ}C$ by use of an accelerated arsenic ion beam, instead of a high temperature deposition. $Ta_2O_5$ films formed by ICBE technique can be received considerable attention for applications to coupling capacitors, gate dielectrics in MOS devices, and memory storage capacitor insulator because of their high dielectric constants above 20 and low temperature process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.41-46
• /
• 2002

In this work, we studied electrical characteristics and leakage current mechanism of Au/$Ta_2O_5$/Si metal-oxide-semiconductor (MOS) devices. $Ta_2O_5$ thin film (63nm) was deposited by atomic layer deposition (ALD) method at temperature of $235^{\circ}C$. The structures of the $Ta_2O_5$ thin films were examined by X-Ray Diffraction (XRD). From XRD, the structure of $Ta_2O_5$ was single phase and orthorhombic. From capacitance-voltage (C-V) analysis, the dielectric constant was 19.4. The temperature dependence of current-voltage (I-V) characteristics of $Ta_2O_5$ thin film was studied from 300 to 423 K. In ohmic region (<0.5 MVcm${-1}$), the resistivity was $2.4056{\times}10^{14}({\Omega}cm)$ at 348 K. The Schottky emission is dominant in lower temperature range from 300 to 323 K and Poole-Frenkel emission dominant in higher temperature range from 348 to 423 K.

• 전기의세계
• /
• v.27 no.4
• /
• pp.45-51
• /
• 1978

A new method of realizing the field effect transistor with a sub-.mu. channel width is described. The sub-.mu. channel width is made possible by etching grooves into n$^{+}$ pn$^{[-10]}$ n$^{[-10]}$ structure and using p region at the wall for the channel region of the Metal-Oxide-Semiconductor transistor (MOST), or by diffusing two different types of impurities through the same diffusion mask and using p region at the surface for the channel region of MOST. When the drain voltage is increased at the pn$^{[-10]}$ drainjunction the depletion layer extends into the n$^{[-10]}$ region instead of into p region; this is also the secret of success to realize the sub-.mu. channel width. As the result of the experimental fabrication, a microwave MOST was obtained. The cut-off frequency was calculated to be 15.4 GHz by Linvill's power equation using the measured capacitances and transconductance.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.159-162
• /
• 2009

The necessity of radiation dosimeter with precise measurement of radiation dose is increased and required in the field of spacecraft, radiotheraphy hospital, atomic plant facility, etc. where radiation exists. Until now, a low power commercial metal-oxide semiconductor(MOS) transistor has been tested as a gamma radiation dosimeter. The measurement error between the actual value and the measurement one can occur since the MOSFET(MOS field-effect transistor) dosimeter, which is now being used, has two gates with same width. The measurement value of dosimeter depends on the variation of threshold voltage, which can be affected by the environment such as temperature. In this paper, a radiation dosimeter having a pair of MOSFET is designed in the same silicon substrate, in which each of the MOSFETs is operable in a bias mode and a test mode. It can measure the radiation dose by the difference between the threshold voltages regardless of the variation of temperature.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.216-219
• /
• 1999

A simple two-terminal cyclic current-voltage(I-V) technique is used to measure the current-transients in MOS capacitors. Distinct charging/discharging currents were measured and analyzed as a function of (1) the hold time. (2) the gate polarity during the FNT electron injection, (3) the injection fluence and (4) the annealing time after the injection had stopped. Discharging and charging current-transients were strongly dependent upon the conditions for forming the inversion layer and the density of interface traps caused during the FNT electron injection, respectively. Several tentative mechanisms were suggested in the current work.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1997.02a
• /
• pp.68-68
• /
• 1997

pp-typpe Si(100) Metal-Oxide-Semiconductor(MOS) 구조에서 산화막과 실리콘 사이의 계면상태 및 결함상태를 Isothermal Cappacitance Transient Sppectroscoppy (ICTS)방법을 이용하여 조사하였다. 특히 pplasma를 이용한 수소화이후 이 구조의 계면상태와 결함상태의 변화를 연구하였다. 상온에서 수소화한 MOS 구조의 경우 결함 상태의 농도가 급속히 감소함을 알 수 있었다. 이 구조에서 나타나는 모든 결함상태의 농도가 급격하게 감소하는 반면에, 수소화에 의한 새로운 깊은준이 결함상태도 관측되었다. 이 깊은 준위 결함 상태는 가전자대 위로부터 0.38eV 위치에 존재하였으며, 열적으로 안정된 결함상태로서, 해리에너지가 2.15$\pm$0.05 eV 이었다. 수소화이후 나타난 이 결함상태는 수소 플라즈마에 의해 구속된 Si원자가 수소원자와 결합하여 outdiffusion함으로 나타난 결함상태로 생각된다.

• Korean Journal of Materials Research
• /
• v.3 no.6
• /
• pp.638-644
• /
• 1993

The degradation of dielectric breakdown field of 8nm-thick gate oxide ($SiO_2$) for Tipolycide MOS(meta1-oxide-semiconductor) capacitor with different annealing conditions and thickness of the polysilicon film on gate oxide was investigated. The degree of degradation in dielectric breakdown strength of the gate oxide for Ti-polycide gate became more severe with increasing annealing temperature and time, especially, for the case that thickness of the polysilicon film remained on the gate oxide after silicidation was reduced. The gate oxide degradation may be occurred by annealing although there is no direct contact of Ti-silicide with gate oxide. From SIMS analysis, it was confirmed that the degration of gate oxide during annealing was due to the diffusion of titanium atoms into the gate oxide film through polysilicon from the titanium silicide film.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.7
• /
• pp.513-519
• /
• 2001

We proposed Si-rich tungsten silicide (WSix) films for alternate gate electrode of deep-submicron MOSFETs. The investigation of WSix films deposited directly on SiO$_2$ indicated that the annealing of as-deposited films using a rapid thermal processor (RTP) results in low resitivity, as well as negligible fluorine (F) diffusion. Specifically, the resitivity of RTP-annealed samples at 800 $^{\circ}C$ for 3 minutes in vacuum was ~160 $\mu$$\Omega$ . cm, and the irregular growth of an extra SiO$_2$ layer due to F diffusion during annealing has not been observed. In addition, the analysis of the WSix-SiO$_2$-Si (MOS) capacitors exhibits excellent electrical characteristics.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1353-1354
• /
• 2007

폴리 실리콘 층의 유무에 따른 금속-옥사이드-반도체(MOS) 구조의 소자를 제작하였다. 터널링 산화막과 블로킹 산화막으로는 $Al_{2}O_{3}$ 층을 증착하였으며, 원자층 증착법을 이용하여 제작하였다. 터널링 산화막 층의 두께에 따른 I-V와 C-V 특성을 측정하였다. 전자들이 폴리 실리콘 층에 저장됨에 따라 N-형의 I-V 특성이 관찰되었다. C-V 측정 시에는 반시계 방향의 히스테리시스 특성을 나타내었으며, 전압이 증가할수록 플랫-밴드 전압 이동 폭이 더욱 증가하였다. 이러한 전기적 특성은 전압의 이동에 따른 전자들이 터널링 산화막 층을 통하여 폴리 실리콘 내부에 저장되기 때문이다. 이를 특성들은 폴리 실리콘의 전하 저장 가능성을 보여주는 것이며, 터널링 산화막 층의 두께에 따른 전기적 특성 변화도 관찰하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.9
• /
• pp.667-670
• /
• 2010

In this paper, a high voltage current sensing circuit for boost converter is designed and verified by Cadence SPECTRE simulations. The current mirror pair, power and sensing metal-oxide semiconductor field effect transistors (MOSFETs) with size ratio of K, is used in our on-chip current sensing circuit. Very low drain voltages of the current mirror pair should be matched to give accurate current sensing, so a folded-cascode opamp with a PMOS input pair is used in our design. A high voltage high side lateral-diffused MOS transistor (LDMOST) switch is used between the current sensing circuit and power MOSFET to protect the current sensing circuit from the high output voltage. Simulation results using 0.35 ${\mu}m$ BCD process show that current sensing is accurate and the pulse frequency modulation (PFM) boost converter using the proposed current sensing circuit satisfies with the specifications.