• 제목/요약/키워드: MM

검색결과 35,933건 처리시간 0.051초

몰개(Squalidus japonicus coreanus)의 난 발생 및 자치어의 형태 발달 (Morphological Development of Egg and Larvae of Squalidus japonicus coreanus (Gobioninae))

  • 김경무;곽영호;김승용;송하윤
    • 한국어류학회지
    • /
    • 제33권4호
    • /
    • pp.252-261
    • /
    • 2021
  • 본 연구는 난과 자치어의 형태 및 생활사가 밝혀지지 않은 Squalidus japonicus coreanus의 초기생활사에 대하여 연구하였다. S. japonicus coreanus의 친어는 충청남도 공주시의 지천에서 확보하였다. 성숙한 암컷 친어에 HCG (human chorionic gonadotropin)를 10 IU/g의 농도로 주사하여 성숙란을 얻었으며, 습식법으로 인공 수정하였다. 수정란은 불투명한 흰색 원형의 침성점착란으로 난경은 1.12±0.03 mm (1.10~1.16 mm, n=30)였다. 수정란은 수온 23±1℃에서 수정 49시간 후 부화가 완료되었으며, 난황자어의 전장은 3.7±0.1 mm (3.4~3.8 mm, n=16)로 흑색소포가 관찰되지 않았다. 부화 5일 후 자어의 전장은 5.3±0.2 mm (5.0~5.5 mm, n=16)로 난황의 흡수가 완료되고 윤충류 섭식을 시작하여 전기자어기로 이행하였다. 부화 19일째의 자어의 전장 6.0±0.3 mm (5.4~6.5 mm, n=16)로 척삭말단이 굴곡이 시작되고 꼬리지느러미의 기조가 형성되어 중기자어기로 이행하였다. 부화 29일 후 자어의 전장은 9.6±0.5 mm (8.3~10.5 mm, n=16)로 척색말단의 굴곡이 완료되어 후기자어기로 이행하였다. 부화 44일 후 전장 15.5±1.0 mm (13.5~17.0 mm, n=16)로 모든 지느러미의 기조가 정수에 도달하여 치어기로 이행하였다.

치리(Hemiculter leucisculus)의 난 발생 및 자치어 형태 발달 (Morphological Development of Egg and Larvae of Hemiculter leucisculus)

  • 김경무;김승용;송미영;송하윤
    • 한국어류학회지
    • /
    • 제32권4호
    • /
    • pp.222-231
    • /
    • 2020
  • 본 연구는 충남 예당호에 서식하는 Hemiculter leucisculus의 초기생활사에 대하여 연구하였다. 성숙된 친어에 HCG (human chorionic gonadotropin)를 10 IU/g의 농도로 주사하여 12시간 후 성숙란을 확보하였으며, 성숙란을 습식법으로 인공 수정하였다. 수정란은 불투명한 담녹색 원형의 침성점착란으로 난경은 0.97±0.02 mm (0.9~1.0 mm, n=30)이었다. 수정란은 수온 22±1℃에서 수정 32시간 후 수정란의 50%가 부화를 완료하였으며, 부화자어의 전장은 3.0±0.2 mm (2.6~3.4 mm, n=15)로 채색은 무색투명하였다. 부화 6일 후 자어는 5.7±0.1 mm (5.4~5.8 mm, n=15)로 입과 항문이 열리고 로티퍼를 섭식하여 전기자어기로 이행하였다. 부화 17일 후 자어는 6.8±0.2 mm (6.5~7.0 mm, n=15)로 척색말단이 굴곡되어 중기자어기로 이행하였다. 부화 30일 후 8.8±0.7 mm (7.9~10.3 mm, n=15)로 등지느러미 기조가 발달하기 시작하였으며, 척색말단 굴곡이 완료되어 후기자어기로 이행하였다. 부화 50일 후 20.8±0.8 mm (18.8~24.6 mm, n=15)로 모든 지느러미의 기조가 정수에 도달하여 치어기로 이행하였다.

유아기 여아의 생식선 차폐체 제작을 위한 골반 지표 계측 (Pelvic Measurement Indicators to Produce the Gonad Protection of Female Infants)

  • 곽종혁;박찬혁;문덕환
    • 한국방사선학회논문지
    • /
    • 제10권2호
    • /
    • pp.101-107
    • /
    • 2016
  • 통상적으로 골반 정면검사 및 고관절 정면검사 시 유아기의 남아보다 여아의 경우 해부학적으로 생식선 차폐를 하기 어렵고 검사 시 차폐체 위치의 정확한 기준점이 없었다. TDP, SD, ISP, IAD,1CDP. 2CDP의 골반지표를 계측하여 정확한 생식선 차폐체를 제작하는데 기초자료로 제공하고자 본 연구를 시행하였다. 신장별로 분석한 결과는 TDP가 70이상-80미만과 110이상-120미만에서 약 30mm, SD는 약 13mm, ISP는 약 19mm, IAD는 약 20mm, 1CDP는 약 2mm. 2CDP는 약 7mm 차이가 나타났으며 통계적으로 유의하였다.(p<0.05) 연령별로 분석한 결과는 TDP가 2이상-3미만과 6이상-7미만에서 약 17mm, SD는 약 10mm, ISP는 약 12mm, IAD는 약 16mm, 2CDP는 약 3mm 차이가 나타났으며 통계적으로 유의하였고 1CDP는 약 1mm정도로 거의 차이가 나타나지 않았고 통계적으로 유의하지 않았다.(p>0.05) 체중별로 분석한 결과는 TDP가 10미만과 20이상에서 약 28mm, SD는 약 14mm, ISP는 약 11mm, IAD는 약 20mm, 1CDP는 약 3mm, 2CDP는 약 8mm 차이가 나타났으며 통계적으로 유의하였다.(p<0.05) 이상의 결과에서 볼 때 유아기 여아의 골반지표 계측치는 차폐체 제작의 기준치로 사용 될 수 있을 것이며, 특히 IAD는 차폐체 위치의 기준점을 제시할 수 있다. 그리고 유아기 여아의 골반지표는 신장, 연령, 체중과 밀접한 상관관계가 있었으며 통계학적 차이분석 결과에서 보듯이 정확한 난소차폐를 하기 위해서는 각각의 신장, 연령, 체중별로 생식선 차폐체를 제작하고 사용해야 할 것이다.

RGP 렌즈 착용한 대학생의 각막곡률반경 측정 (Study in Radius of Corneal Curvature of university Students with Keratometer)

  • 김창식;류광민
    • 한국안광학회지
    • /
    • 제11권3호
    • /
    • pp.181-185
    • /
    • 2006
  • 각막곡률반경은 RGP 렌즈를 착용한 대학생(1980~1984년)을 대상으로 측정하였다. 대상자는 187명으로 여자(167), 남자(17) 그리고 원추각막환자(3)이었다. 각막곡률반경은 전체대상자의 평균치가 7.77mm이었고, 좌안과 우안의 측정치 역시 7.77mm이었다. 눈의 수평, 수직경선의 측정치는 7.88mm, 7.65mm이었다. 남자와 여자의 경우는 모두가 수평이 수직경선보다 동일하게 0.22mm 크게 조사되었다. 성별에 따른 곡률반경의 차이는 남자의 경우 평균치가 7.84mm으로 여자의 경우보다 0.08mm 정도 크게 측정되었고, 좌, 우안의 크기는 차이가 없었다. 원추각막환자는 곡률반경의 평균치가 6.86mm으로 정상인 조사대상자의 평균치보다 0.91mm 작게 조사되어 차이가 큰 것으로 나타났다.

  • PDF

13mm 이하 순환굵은골재 치환이 콘크리트의 공학적 특성에 미치는 영향 (Effect of the Replacement of Recycled Coarse Aggregates Under 13mm on Engineering Properties of the Concrete)

  • 한민철;강병회
    • 한국건설순환자원학회논문집
    • /
    • 제3권1호
    • /
    • pp.43-49
    • /
    • 2015
  • 본 연구에서는 현행 레미콘사에서 콘크리트 제조 시 13mm 이하 굵은골재의 부족으로 인한 품질저하가 발생하는 문제를 해결하기 위하여 13mm 이하 순환굵은골재를 치환하여 콘크리트의 제반특성을 검토하였다. 실험변수로 13mm 이하 순환 굵은골재를 13~25mm 굵은골재에 10~100%까지 치환사용하여 콘크리트의 품질에 대해 분석하였다. 실험결과 13mm 이하 순환 굵은골재 치환사용으로 유동성이 증가하였으며, 공기량은 골재간의 공극충전효과로 인해 감소하였다. 또한 골재간의 연속입도 구성으로 콘크리트 내부에 공극이 감소되어 강도의 향상과 건조수축이 감소하였다, 이상을 종합하면 13mm 이하 순환 굵은골재를 13~25mm 굵은골재만 사용한 콘크리트에 30% 내외 치환사용시 콘크리트의 품질이 향상되는 것으로 나타났다.

규산염광물질 MAXIMINERAL(72) 첨가가 육계의 생산성에 미치는 영향 (Effects of Supplementing of Aluminosilicate MAXIMINERAL(72) on the Performance of Broiler Chickens)

  • 이승환;서상훈;엄재상;백인기
    • 한국가금학회지
    • /
    • 제23권3호
    • /
    • pp.121-128
    • /
    • 1996
  • A feeding trial was conducted to evaluate the effect of supplementing MAXIMINERAL(72)(MM), a cornmercial product of Ca, Mg-bentonite, to the broiler diet. One thousand hatched rnale broiler chickens(Cobb strain) were randomly assigned to 4 dietary treatments; MM 0% (control), MM 1%, MM 2%, and MM 2% + tricalciurnphosphate (CaP) 0.5%. Each treatment had 5 replicates of 50 birds each. Birds were grown on floor and fed ad libitum for 5 wk. Through the whole period, weight gain and feed intake were not significantly different among treatments. However, weight gain of MM 2% + CaP 0.5% group was highest and orthogonal contrast showed that the feed intake during the period of 0~2 wk was significantly(p<0.01) lower in MM supplemented groups than the control. Feed efficiency (feed /gain) of MM supplemented groups were significantly better than the control. Feed efficiency of the control was significantly(p<0.05) higher than MM 1% and MM 2% + CaP 0.5% groups but not different from MM 2% group. Contents of ash, Ca and P of tibia were not significantly different among treatments but that of P tended to be low in MM 1% and MM 2% groups. There were significant (p<0.01) differences in plasma alkaline phosphatase (AP) activity among treatments. The highest AP activity was shown in MM 2% + CaP 0.5% group followed by the control, MM 2% and MM 1% group. It was concluded that supplernentation of MM at the level of 1% of broiler diet significantly improves feed efficiency and adjustment of P level rnay further improve the performance of the broiler chickens.

  • PDF

일부 농촌지역 주민들의 수지 이점식별 및 관련요인 (Two-Point Discrimination of Fingertips and Related Factors in Rural Community Residents)

  • 이승주;신현욱
    • The Journal of Korean Physical Therapy
    • /
    • 제18권5호
    • /
    • pp.13-23
    • /
    • 2006
  • Purpose: This study was to investigate two-point discrimination(TPD) and related factors in rural community residents. Methods: The sample consisted of 68 people who have been living in rural community in June 2005 studied. TPD was measured from the tips of the thumb, index, middle, ring, and little finger of each hand with the TPD esthesiometer. The research was designed to be a cross-sectional measured study. SAS statistical software was used for the analysis. The characteristics of the study sample were described by mean and standard deviation(SD) for continuous variables and by frequency and percentage for categorical variables. The Student's t-test and analysis of variance (ANOVA) were used to compare TPD in gender and diabetes mellitus. A Pearson's correlation analysis was conducted for relationship among values of 5 fingers. Multiple regression analysis was performed to determine the factors associated with TPD. Results: A total of 68 residents were measured, their average $age{\pm}SD$ was $54.2{\pm}23.2$ years(range: $12{\sim}88\;yr$). The mean TPD for 5 fingers tips in dominated side was 4.76mm(thumb 3.98mm, index 4.22mm, middle 4.79mm, ring 5.17mm, and little finger 5.65mm, respectively). 4.91mm for thumb finger of women was significantly higher than 3.54mm that of men's in difference between gender(p=.01l4), also women(4.39mm) was higher than men(3.71mm) in median nerver area(p=.0318). There was a statistically significant difference in age(p=.0022), which were under age of 20(3.36mm), 30 years(3.61mm), 40 years(5.38mm), 50 years(4.84mm), 60 years(5.28mm), 70 years(5.18mm), and over age of 80(5.29mm). Factors related to TPD of fiver fingers by multiple regressions were gender(${\beta}=.03$, p=.0001). Conclusions: Taken together, gender and age were significantly associated with TPD. We recommend that further research should measure TPD by using larger sample sizes and more sensitive measurement instruments.

  • PDF

아스팔트 콘크리트 변형강도 시험에서의 적정 하중재하속도 선정 연구 (Determination of Proper Loading Speed for Deformation Strength Test of Asphalt Concretes)

  • 조병진;박태원;도영수;김광우
    • 한국도로학회논문집
    • /
    • 제10권4호
    • /
    • pp.225-234
    • /
    • 2008
  • 본 연구는 아스팔트 혼합물의 변형강도에 대한 적정 하중재하속도를 선정하기 위하여 수행하였다. 이를 위하석 직경(D) 40mm, 하단의 원형 절삭반경(r)을 10.0mm의 하중봉으로 Kim test의 하중재하속도를 분당 10mm, 30mm, 50mm, 70mm로 하여 변형강도를 측정하고 반복주행시험을 수행하여 얻어진 소성변형 특성치와의 상관관계에 대하여 회귀분석을 수행하였다. 하중재하속도별 변형강도 값은 하중재하속도가 증가함에 따라 변형강도도 증가하는 경향을 보였다. 이것은 하중재하속도가 변형강도에 미치는 영향이 큰 요소임을 알 수 있었다. 하중재하속도에 따른 변형강도와 반복주행시험 결과인 최종침하깊이 및 동적안정도와의 상관성 분석을 통해 30mm/min의 하중재하속도가 가장 적합한 것으로 나타났다. 하중 30mm/min 하중재하속도가 불가능한 시험기의 30mm/min 하중재하속도에서의 변형강도는 제안된 환산계수를 적용해야 한다.

  • PDF

산지와 농경지의 증발산량 특성 분석 (Analysis evapotranspiration characteristics of mountain and farmland)

  • 이정훈;김기영;이연길;정성원
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2017년도 학술발표회
    • /
    • pp.235-235
    • /
    • 2017
  • 수문 순환과 물 수지에 관한 연구는 강수량, 지표유출량, 지하수, 토양수분 및 증발산량 등에 대한 관측이 이루어질 때 실제로 규명될 수 있다. 하지만, 수문 순환과 물수지 평가에 중요한 부분을 차지하는 증발산량의 경우 관측값보다 단순한 가정이나 경험식에 의한 추정값을 사용하고 있다. 따라서, 수문 순환과 물수지의 정량적인 분석을 위해서는 수문 순환 과정에서 상당부분을 차지하는 증발산량의 측정(실측)과 자료의 축척이 필요한 실정이다. 본 연구는 국토교통부의 기초수문자료 구축사업의 일환으로 수행되었으며, 수문자료의 다양화 목적을 가지고 에디공분산 기술을 사용하여 증발산량을 직접 관측하고 있다. 관측지점은 한반도의 약 70%를 차지하는 산림지 중 대표적 식생 기능 형태인 혼효림으로 구성된 지점(설마천 관측소, 2007년 8월부터)과, 인위적인 관개가 이루어지는 농경지(청미천 관측소, 2008년 8월부터)에서의 증발산량 측정을 수행하였다. 관측된 자료를 활용하여 관측소별로 연도별 증발산량 특성을 분석한 결과는 다음과 같다. 설마천 관측소(주변식생 : 혼효림)에서 산정된 연증발산량은 2008년 471.7mm, 2009년 408.4mm, 2010년 489.4mm, 2011년 387.0mm, 2012년 323.3mm, 2013년 293.3mm, 2014년 360.9mm, 2015년 419.6mm, 2016년 566.9mm이고, 발생한 강수량 대비 증발산 비율은 18.9%~56.2%범위로 산정되었다. 청미천 관측소(주변식생 : 농경지)에서 산정된 연증발산량은 2009년 571.8mm, 2010년 650.6mm, 2011년 523.9mm, 2012년 509.8mm, 2013년 467.9mm 2014년 533.9mm, 2015년 600.5mm, 2016년 588.0mm이고, 발생한 강수량 대비 증발산량의 비율은 25.6%~71.4%범위로 산정되었다. 강수량 대비 증발산량 비율의 최대값은 설마천 관측소는 2014년, 청미천 관측소는 2015년에 발생하였다. 평균 증발산량 비율은 산림지인 설마천 관측소보다 논경지인 청미천 관측소가 평균 13.3%정도 높은 특성을 보였다.

  • PDF

한국 대학도서관 가구의 표준화에 관한 인간공학적 연구 -서가${\cdot}$의자${\cdot}$책상${\cdot}$ 목록함을 중심으로- (Human Engineering Approach to the Standardization of Shelving, Chairs, Tables and Card Cabinets for College and University Libraries In Korea)

  • 손정표
    • 한국문헌정보학회지
    • /
    • 제11권
    • /
    • pp.3-42
    • /
    • 1984
  • This is to establish a model of the standardization of shelving, chairs, tables and card cabinets for college and university libraries in Korea. The size of furniture was measured on the base of the analysis of the human factors, such as the standard size of human bodies of the college students in Korea, the scope of work area, the moving degree of muscles, the limit of the visual field, etc. The results of this study are as follows: 1. It is desirable that the standard shelf length should be 800mm. and the maximum . shelving height should not exceed 1,803mm. And it is desirable that the bottom shelf has a ground clearance of about $210\~390mm$. 2. It is advisable that the sloped shelving has the slope from about 1,000mm, or 930mm, and the gradient should be $19^{\circ}$ from the above mentioned sloping position and the bottom of each shelf. And it is desirable that the slope height of each shelf should be 77mm. 3. It is advisable that the seat area for users should be $410\~420\times420mm$, and the seat height should be $390\~0400mm$. 4. It is desirable that the table size per user should exceed $490\times880\~890mm$, and the table height should be $680\~690mm$. 5. It is advisable that each tray of the card cabinet should hold about 740 cards, and the depth should exceed 430mm. And it is desirable that the maximum height of card cabinets should be as follows: 60du(drawer units)-$1,400\~1,460mm$, 30du-1, 300mm, 15du-1,100mm. In addition, it is advisable that the 30du cabinet should accomodate 5 trays vertically and 6 trays horizontally for avoiding the worst working position rather than 6 trays vertically and 5 trays horizontally. 6. It is desirable that the height of sliding reference shelves in card cabinets, or consultation tables should be 900mm. But in the case of the sliding shelves, it is desirable to be as follows: 15du-900mm when the card cabinet height is more than 1,100, mm, but unnecessary when less than 1,100mm high, 30du-1,000mm, or 1,100mm in the case of $5\times6du$, but 900mm in the case of $6\times5du$, $60du-900\~950mm$ when the card cabinet height is $1,400\~1,460mm$.

  • PDF