• Journal of information and communication convergence engineering
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2019

In this paper, we present the block diagonalization (BD) algorithm for the multiple-user multiple input multiple output (MU-MIMO) $4{\times}4$ system using specific purpose processor (SPP) hardware. Our objective is to improve the single-user MIMO (SU-MIMO) system using the MU-MIMO technology, which is remarkably fast and allows more users to connect simultaneously. To that end, our MU-MIMO precoder uses the BD algorithm to ensure signal integrity when connecting multiple users; but remains accurate and stable. However, a precoder that uses the BD algorithm is computationally complex; therefore, we use an SPP with special functions designed to compute the BD algorithm. The implementation test results show that our SPP computes the BD algorithm faster than the software solution.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.32-36
• /
• 2016

In wireless communication systems, jamming attack is a critical threat. Especially, reactive jamming can jam when the sender and receiver are communicating, which can maximize the attack efficiency of jamming. In this paper, we use the property of multi-input multi-output (MIMO) technology to achieve jamming resilient orthogonal frequency-division multiplexing (OFDM) communications. In particular, we use MIMO interference cancellation to remove the jamming signals strategically. We first investigate the reactive jamming attack model and their impacts on the MIMO-OFDM systems. We then present an iterative channel estimation algorithm that exploits MIMO interference cancellation. Our simulations show various anti-jamming methods and demonstrate the efficiency of our proposed algorithm under the reactive jamming attack.

• Journal of information and communication convergence engineering
• /
• v.16 no.2
• /
• pp.72-77
• /
• 2018

This paper presents a novel channel capacity maximization method for a distorted $2{\times}2$ line-of-sight (LOS) multiple-input multiple-output (MIMO) link. A LOS MIMO link may be distorted by the influence of environmental factors such that the channel capacity of the LOS MIMO link may be degraded. By using the proposed method, the channel capacity of a distorted $2{\times}2$ LOS MIMO link can be the same as that of the ideal $2{\times}2$ LOS MIMO link. The proposed method employs an additional receiver antenna to maximize the channel capacity. In contrast to a $3{\times}2$ LOS MIMO link, a receiver circuit for a third receiving antenna is not necessary. Hence, the receiver for the proposed method is much simpler than that for a $3{\times}2$ LOS MIMO link. We determine the optimal position of the additional receiver antenna analytically. Simulation results show that the channel capacity can approach the ideal using the proposed method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.2 no.4
• /
• pp.194-208
• /
• 2008

In this paper, a multiple-input-multiple-output (MIMO) hybrid-automatic repeat request (HARQ) algorithm with antenna scheduling is proposed. It retransmits the packet using scheduled transmit antennas according to the state of the communication link, instead of retransmitting the packet via the same antennas. As a result, a combination of conventional HARQ systems, viz. chase combining (CC) and incremental redundancy (IR) are used to achieve better performance and lower redundancy. The proposed MIMO-OFDM HARQ system with antenna scheduling is shown to be superior to conventional MIMO HARQ systems, due to its spatial diversity gain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.706-711
• /
• 2012

The current visible light communication (VLC) systems have a short transmission distance and a low data rate. To overcome this, we studied on the method of appling MIMO technology to VLC. However, it is difficult to apply the original MIMO technology used in RF frequency to wireless VLC. In VLC system, a lens can be used to separate the transmitted signals. And, if we use an image sensor as the receiver, MIMO technology can be applied to LED wireless visible light communication. In this paper, we report an experiment of $2{\times}2$ LED wireless visible light communication using a commercial image sensor receiver. We show the experimental demonstration with a transmission length of 10.5 m and a data rate of 200 bit/s.

• Journal of Communications and Networks
• /
• v.8 no.2
• /
• pp.194-204
• /
• 2006

This contribution focuses on the maximum likelihood (ML) noncoherent synchronization of multi-antenna transceivers working in faded environments and employing ultra-wideband impulse radio (UWB-IR) transmit technology. In particular, the Cramer-Rao bound (CRB) is derived for the general case of multiple input multiple output (MIMO) UWB-IR systems and used to compare the ultimate performance of three basic transmit schemes, thereinafter referred to as single input multiple output (SIMO), MIMO equal signaling (MIMO-ES), and MIMO orthogonal signaling (MIMO-OS) ones. Thus, the noncoherent ML synchronizer is developed for the better performing transmit scheme (i.e., the SIMO one) and its performance is evaluated under both signal acquisition and tracking operating conditions. The performance gain in the synchronization of UWB- IR signals arising by the utilization of the multi-antenna technology is also evaluated.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.2
• /
• pp.49-55
• /
• 2008

Combining OFDMA with MIMO is the key technology for the 4G mobile communication. OFDMA can relieve inherent difficulties of high-speed transmission. MIMO technology can be largely categorized into two techniques: one is STC for diversity gain and the other is SM for high frequency efficiency. In this paper, we depict various MIMO techniques of two transmit antenna and compare the computational complexity of decoding process for the techniques. Then, we analysis the performance of the techniques in the WiBro downlink environment based on OFDMA. We perfer ML algorithm which is the optimum performance and ZF algorithm of least computational complexity for SM detection.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.7
• /
• pp.2435-2453
• /
• 2015

Independent component analysis (ICA) is a signal processing technique used for un-mixing of the mixed recorded signals. In wireless communication, ICA is mainly used in multiple input multiple output (MIMO) systems. Most of the existing work regarding the ICA applications in MIMO systems assumed static or quasi static wireless channels. Performance of the ICA algorithms degrades in case of time varying wireless channels and is further degraded if the data block lengths are reduced to get the quasi stationarity. In this paper, we propose an ICA based MIMO transceiver that performs well in time varying wireless channels, even for smaller data blocks. Simulation is performed over quadrature amplitude modulated (QAM) signals. Results show that the proposed transceiver system outperforms the existing MIMO system utilizing the FastICA and the OBAICA algorithms in both the transceiver systems for time varying wireless channels. Performance improvement is observed for different data blocks lengths and signal to noise ratios (SNRs).

• ETRI Journal
• /
• v.40 no.3
• /
• pp.303-308
• /
• 2018

This paper proposes a simple yet accurate method for estimating the antenna correlation coefficient (ACC) of a high-order multiple-input multiple-output (MIMO) antenna. The conventional method employed to obtain the ACC from three-dimensional radiation patterns is costly and difficult to measure. An alternate method is to use the S-parameters, which can be easily measured using a network analyzer. However, this method assumes that the antennas are highly efficient, and it is therefore not suitable for lossy MIMO antenna arrays. To overcome this limitation, we define and utilize the non-coupled radiation efficiency in the S-parameter-based ACC formula. The accuracy of the proposed method is verified by the simulation results of a 4-port highly coupled lossy MIMO array. Further, the proposed method can be applied to N-port arrays by expanding the calculation matrix.

• Journal of Advanced Navigation Technology
• /
• v.7 no.1
• /
• pp.51-58
• /
• 2003

Generally, multi-path is viewed as an undesirable feature of wireless communications. Therefore, diversity reception and adaptive array schemes are proposed to mitigate its effects. Recently, to increase the spectrum efficiency and the link reliability, multiple-input multiple-output (MIMO) scheme is devised to exploit multi-path in a scattering wireless channel. In this paper, we have evaluated the channel capacity of MIMO Multi-Carrier CDMA system in path correlation fading channel. And, the channel capacity of MIMO system is compared with single-input single-output (SISO) system. From the results, the MIMO multi-carrier CDMA system with path correlation yields better performance with respect to channel capacity than a SISO system.