• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2005.10a
• /
• pp.267-270
• /
• 2005

유기셀레늄급원을 달리하여 쇠고기 육색 안정성에 미치는 영향을 분석한 결과는 다음과 같다. Myoglobin의 함량은 대조구와 시험구에서 각각 6.39%, 14.18%로 대조구가 시험구에 비하여 낮은 결과를 보였으며, Oxy-Myoglobin의 함량은 반대로 대조구 89.07%, 시험구 83.47%로 시험구가 대조구에 비하여 낮은 결과를 보였다(p<0.05). 그러나 Met-myoglobin 함량은 대조구가 4.56%이였고 시험구가 2.35%로 대조구가 높은 결과를 보였다. 보다 정확한 결과를 평가하기 위해서는 시료를 Met화 시킨 후 측정해 볼 필요성이 대두되어 도축후 $4^{\circ}C$에서 14일 및 21일간 숙성한 시료를 $20^{\circ}C$에서 48시간 산화시킨 후 측정 육색소 화학적 조성을 비교한 결과, 육색소 화학적 조성을 비교한 결과로 Myoglobin 함량은 저장 14일차와 21일차에서 유의적인 차이를 보이지 않았으나, Oxy- myoglobin은 저장 14일차와 21일차 모두 유기셀레늄 강화 버섯 폐배지 급여구가 대조구와 무기셀레늄 급여구에 비하여 높은 결과를 보였다. Met-myoglobin함량에 있어서는 대조구와 무기셀레늄구가 유기 셀레늄구와 유기셀레늄강화 버섯 폐배지 급여구에 비하여 높은 결과를 보였다(p<0.05). 유기셀레늄 강화 버섯 폐배지 급여구가 대조구나 유기셀레늄구에 비하여 Oxy-myoglobin production이 유의적으로 높았으며, Met-myoglobin Activity는 유기 셀레늄 급여구가 가장 높았으며, 그 다음으로는 유기셀레늄강화 버섯폐배지 급여구가 높았다(p<0.05). 이러한 결과는 소매상품 으로 제조 판매시 Oxy-Mb이 Met-Mb으로의 전환을 억제하여 이상적인 육색을 장시간 유지할 수있을 것으로 판단된다.조직감과 염도에서 매우 좋게 평가되었다. 이러한 결과는 제조 가능한 식염첨가최저수준은 0.5%이상임을 보여주었다. 따라서 로인 햄의 제조에 필요로 되는 식염의 첨가량은 0.5${\sim}$1.5% 범위로 평가된다. 차후의 연구로는 저염 로인 햄의 경우 품질의 저하를 보완할 수 있는 기능성 첨가물이나 가공기법이 필요할 것으로 보인다.97.22로 가장 낮았고, 기타 처리구는 1.19${\sim}$1.59의 처리를 보이고 있는데 비하여, 대조구(100) 대비 증체율에서는 생봉독 처리 2구에서 103.30으로 3.30%가 높았다.양성이 무엇보다 중요하다. 특히 지역자원 활용 소스 중심의 문화관린 산업의 seeds 발굴과 향토상품의 상품화와 네트워크 조직망 구축을 위한 지역중심의 복합 생활문화 공간이 필요할 것이며, 이를 촉진키 위한 mentor academy시스템 접근을 통해 점점 고령화되어 가고 있는 재래시장에 대해 차별적 특성이 반영된 종합적이고 체계적 접근 방법연구가 필요하다./TEX> 자체기술개발, 선진기술 도입, 산업간 및 산업내 기술확산, 국제기술협력 ${\rightarrow}$ 기술혁신의 촉진 ${\rightarrow}$ 총요소생산성과 기업경쟁력(자원 및 역량, 프로세스 경쟁력, 품질경쟁력, 시장경쟁력, 고객성과, 시장성과, 재무성과)의 제고 ${\rightarrow}$ 가격경쟁력(임금, 금리, 물류비용, 환율 등)과 비(非)가격경쟁력(디자인, 에프터서비스, 품질, 운송 등)의 제고 ${\rightarrow}$ 국가경쟁력의 제고 ${\rightarrow}$ 국제수지 흑자 ${\rightarrow}$ 성장 ${\rightarrow}$ 물가 및

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.13-20
• /
• 2005

Fiber-Bragg-grating external cavity laser(FGL) modules were fabricated and experimentally analyzed. Proposed as a cost-effective solution for optical sources in the WDM-PON access network, FGL modules were packaged to TO-CAN type. We obtained a low threshold current of 13 mA, and an optical output power of 3.6 mW with a bias current of 60 mA at $25^{\circ}C$. The lasing wavelength dependencies on current and temperature were as small as 5.2 pm/mA and 30 pm/$^{\circ}C$, respectively. These change rates of the wavelength with the temperature and current are smaller than those of the DFB laser. Single-mode oscillations with the side-mode suppression ratio(SMSR) over 30 dB are maintained above the threshold current level. The FGL modules can be directly modulated at 155 Mbps, PRBS(2$^{23}$ -1) NRZ signal. Through the BER plots, we did not see the significant degradations before and after the transmission over 20km of the SMF at 155 Mb/s.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.2
• /
• pp.133-140
• /
• 2014

PURPOSE: The purpose of this study was to compare the effect of current density on penetration depth, tissue concentration and transdermal transport of methylene blue(MB) by iontophoretic transdermal delivery. METHODS: Twenty-four male Sprague-Dawley rats were randomly divided into 1 mA($0.11mA/cm^2$), 2 mA($0.22mA/cm^2$), 4 mA($0.44mA/cm^2$), and 8 mA($0.89mA/cm^2$) groups. These rats were exposed to anodic iontophoresis of 1% MB using a direct current for 15 minutes. The penetration depth were measured using light microscopy from cryosections of skin tissue. The tissue concentration and transdermal transport were measured using biochemical analysis from target skin tissues. The data were analyzed with one-way analysis of variance. RESULTS: The significant differences in the penetration depth, tissue concentration and transdermal transport were detected among the groups(p<.001). Post hoc comparisons of the penetration depth, tissue concentration and transdermal transport of he 2 mA, 4 mA, and 8 mA iontophoresis groups were greater than in the 1 mA iontophoresis group(p<.05). There was no significant difference, however, among 2 mA, 4 mA, and 8 mA iontophoresis group. CONCLUSION: There was no difference in the efficiency of iontophoresis from 2 mA($0.22mA/cm^2$) to 8 mA($0.89mA/cm^2$). Higher current density can cause skin injury and discomfort sensation. In general, $0.5mA/cm^2$ is proposed to be the maximum iontophoretic current which should be used on human. The appropriate current amplitude should be selected by considering the safety current density and the depth of the target tissue.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.183-190
• /
• 2017

Blood flow restriction(BFR) exercise is defined as low and short lengthexercise with pneumatic pressure belts at the top of the limbs. This study was conducted to investigate the effects of walking exercise with BFR on body composition, growth hormone, and muscle damage markers in obese women. Eleven obese women(> BMI 25kg/m2&> body fat 30%) wore pneumatic pressure belts at both femurs and performed walking exercise twice per day, 3days/wk for 4 week (walking 2min; resting 1min). Body weight, BMI and body fat significantly decreased after exercise(p<0.05), while% body fat was slightly decreased after exercise, although this difference was not significant. Growth hormones increased slightly after exercise, although not significantly. Muscle damage markers (CK(p<0.05), LDH(p<0.05) and K+(p<0.01 increased significantly after exercise, but Mb was did not change significantly. These results suggest that 4-weeks ofblood flow restriction exercisecould be used to prevent and treat obesity and related chronic diseases, as well as metabolic syndrome. Moreover, the effects were similar to those observed in response to high intensity resistance programs, despite the short period for which BFR were conducted.

• Korean Journal of Plant Resources
• /
• v.32 no.5
• /
• pp.442-447
• /
• 2019

In this study, we evaluated the effect of Rodgersia podophylla leave extracts (RPL) on ${\beta}-catenin$ level in human cancer cells. RPL dose-dependently inhibited cell proliferation in SW480, A549, MDA-MB-231, PC-3 and AsPC-1 cells. RPL dramatically decreased ${\beta}-catenin$ protein level in all cancer cells. However, decreased level of ${\beta}-catenin$ mRNA expression was observed in A549 and AsPC-1 cells. In addition, RPL dramatically attenuated cyclin D1 mRNA expression in all cancer cells. MG132 decreased the downregulation of ${\beta}-catenin$ protein level induced by RPL in all cancer cells, while RPL-induced downregulation of ${\beta}-catenin$ was inhibited by the inhibition of $GSK-3{\beta}$ by LiCl in MDA-MB-231 cells. RPL phosphorylated ${\beta}-catenin$ and $GSK-3{\beta}$. In addition, the inhibition of $GSK-3{\beta}$ by LiCl attenuated RPL-induced ${\beta}-catenin$ phosphorylation. Based on these findings, RPL may be a potential candidate for the development of chemopreventive or therapeutic agents for human cancer.

• Composites Research
• /
• v.35 no.2
• /
• pp.98-105
• /
• 2022

In this study, polyvinyl alcohol (PVA)/graphene oxide (GO)/iron oxide (Fe₃O₄) magnetic microgels were prepared using a microfluidic approach and the dye adsorption capacity of the microgels was confirmed. The adsorption capacity (q_e) of the gels was evaluated by varying the dye concentration, pH, and contact time with the microgels. The dyes used in this work were methylene blue (MB), crystal violet (CV), and malachite green (MG), and microgels showed the highest adsorption capacity (191.1 mg/g) in methylene blue. The microgels exhibited the highest adsorption capacity in the dye aqueous solution at pH 10 due to the presence of atomic nitrogen ions (N⁺) on the dye molecules. The adsorption isotherm studies revealed that the Langmuir isotherm is the best fit isotherm model for the dye adsorption on the microgels, indicative of monolayer adsorption. The kinetic analysis exhibited that the pseudo-second order model fits better than the pseudo-first order model, confirming that the adsorption process is chemisorption. In addition, the magnetic microgels showed good reusability and recovery efficiency. It was confirmed that the adsorption capacity of the gels maintains more than 70% of the initial capacity after 5 times of cycle experiments.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.5
• /
• pp.410-417
• /
• 2000

Purpose: Idoxifene is currently entering phase II clinical trials for the treatment of advanced breast cancer. The radiolabeled idoxifene using $[^{123}I]$ provides an opportunity for clinical pharmacology with single photon emission computed tomography (SPECT). The purpose of this study was to prepare radiolabeled idoxifene using $[^{123}I]$ and to determine its cell uptake of breast cancer cell line. Materials and Methods: With a view to evaluating new anticancer drugs, we are investigating the novel antiestrogen pyrrolidino-4-iodotamoxifen (idoxifene). $[^{123}I]$Idoxifene has been prepared in no-carrier-added form using a tributyl stannylated precursor which has been synthesized by means of (2-chloroethoxy)benzene with (${\pm}$)-2-phenylbutanoic acid on the basis of previously reported standard methods. The biodistribution and dynamic behavior of the compound were investigated using the comparative breast cancer cell line, MCF-7 (estrogen receptor-positive) and MDA-MB-468 (non-estrogen receptor). Results and Conclusion: Acylation of (2-chloroethoxy)benzene with (${\pm}$)-2-phenylbutanoic acid gave the versatile ketone (81%) which reacted with 1,4-diiodobenzene to give triphenylethylene as a mixture of E and Z geometric isomers, which were separated by the recrystallization in ethanol. The E-isomer was treated with pyrrolidine to give idoxifene (67%). In order to incorporate radioactive iodine into the 4-position, the 4-stannylated precursor was prepared (30%). The yield of radioiodination was 90-92% with a high radiochemical purity greater than 98%. The ratio of tumor uptake of the breast cancer cell line between MCF-7 and MDA-MB-468 was about 1.7.

• Journal of Environmental Science International
• /
• v.14 no.12
• /
• pp.1195-1201
• /
• 2005

In order to develop a dye coloring technology on Conchiolin layer in cultured pearls, appropriate dyes were selected, their solubilities in various solvents were studied, and adsorption and desorption experiments were performed. Solubilities of several basic dyes known to suitable for the pearl coloring, i.e., Rhodamine 6G(R6), Rhodamine B(RB) and Methylene Blue(MB), in several solvents (distilled water, methanol, ethanol, and acetone) were investigated. Among these dyes, R6 was chosen as a dye for single component adsorption and desorption experiment due to the relatively good solubility in various solvents tested. Solubilities of dyes were judged to be enough to color the pearls since dye concentrations in pearl coloring are, in general, not so high. The internal surface area of the pearl layer is believed to be directly related to the dye adsorption, the single-point internal surface area of the pearl layer measured at the nitrogen relative pressure of 0.3 was found to be $0.913m^2/g$, and the BET internal surface area, $1.01m^2/g$ The most probable diameters of micropores and macropores were found to be $40{\AA}$and $5000{\AA}$ respectively, from the pore size distribution data. Adsorption isotherm was well fitted to the Langmuir isotherm model, resulting in q=$\frac{1.62C}{1+1.09C^{.}}$

• Rapid Communication in Photoscience
• /
• v.1 no.1
• /
• pp.13-15
• /
• 2012

New porous $TiO_2$ nanostructures with shapes of pearl and rice were synthesized by hydrothermal treatment of $TiO_2$-liposome nanocomposites in acid and base solutions, respectively, as identified by scanning electron microscopy (SEM), transmission electron microscopy (TEM) images and large Brunauer-Emmett-Teller (BET) surface areas. The x-ray diffraction (XRD) patterns and selected area electron diffraction proved them to be well-defined anatase crystals. Their UV-visible reflectance absorption spectra were observed to have low band gap energy (3.03 and 3.07 eV, respectively), exhibiting surface absorption band in the visible range from 400 to 600 nm. The degradation of methylene blue (MB) over the $TiO_2$ nanostructures was observed upon visible-light irradiation, which was found to be very efficient as compared with any other conventional visible-light responsive $TiO_2$ nanostructures.

• Journal of Biomedical Engineering Research
• /
• v.35 no.1
• /
• pp.1-7
• /
• 2014

Among semi-quantitative or fully quantitative lateral flow assay readers, an image sensor-based instrument has been widely used because of its simple setup, cheap sensor price, and compact equipment size. For all previous approaches, monochrome CCD or CMOS cameras were used for lateral flow assay imaging in which the overall intensities of all colors were taken into consideration to estimate the analyte content, although the analyte related color information is only limited to a narrow wavelength range. In the present work, we introduced a color CCD camera as a sensor and a color decomposition method to improve the sensitivity of the quantitative biosensor system which utilizes the lateral flow assay successfully. The proposed setup and image processing method were applied to achieve the quantification of imitatively dispensed particles on the surface of a porous membrane first, and the measurement result was then compared with that using a monochrome CCD. The compensation method was proposed in different illumination conditions. Eventually, the color decomposition method was introduced to the commercially available lateral flow immunochromatographic assay for the diagnosis of myocardial infarction. The measurement sensitivity utilizing the color image sensor is significantly improved since the slopes of the linear curve fit are enhanced from 0.0026 to 0.0040 and from 0.0802 to 0.1141 for myoglobin and creatine kinase (CK)-MB detection, respectively.