• 한국전기전자재료학회논문지
• /
• 제13권7호
• /
• pp.612-616
• /
• 2000

This paper describes on the fabrication and characteristics of hot-film type micro-flowsensors integrated with Pt-RTD(resistance thermometer device) and micro-heater on the Si membrane in which MgO thin-film was used as medium layer in order to improve adhesion of Pt thin-film to SiO$_2$layer. The MgO layer improved adhesion of Pt thin-film to SiO$_2$layer without any chemical reactions to Pt thin-film under high annealing temperatures. Output voltages increased due to increase of heat-loss from sensor to external. The output voltage was 82 mV at $N_2$flow rate of 2000 sccm/min heating power of 1.2 W. The response time($\tau$:63%) was about 50 msec when input flow was stepinput

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권4호
• /
• pp.1-7
• /
• 2009

The unique features of HTS offer Opportunities and challenges to a number of applications. In this paper we focus on NMR and MRI magnets, illustrating them with the NMR/MRI magnets that we are currently and will shortly be engaged: a 1.3GHz NMR magnet, an "annulus" magnet, and an $MgB_2$ whole-body MRI magnet. The opportunities with HTS include: 1) high fields (e.g., 1.3GHz magnet); 2) compactness (annulus magnet); and 3) enhanced stability despite liquid-helium-free operation ($MgB_2$ whole-body MRI magnet). The challenges include: 1) a large screening current Beld detrimental to spatial field homogeneity (e.g., 1.3 GHz magnet); 2) uniformity of critical current density (annulus magnet); and 3) superconducting joints ($MgB_2$ magnet).

• 한국염색가공학회지
• /
• 제30권1호
• /
• pp.51-61
• /
• 2018

In this study, effluent water was produced through Submerged Membrane Bio-Reactor(SMBR) process, which is a simple system and decomposes organic matter contained in wastewater with biological treatment process and performs solid-liquid separation, Especially, ozone oxidation treatment process is applied to effluent water containing fluorescent whitening agent, which is a trace pollutant which is not removed by biological treatment, and influences the quality of reused water. The concentration of $COD_{Cr}$ in the SMBR was $449.3mg/{\ell}-COD_{Cr}$, and the concentration of permeate water was $100.3mg/{\ell}-COD_{Cr}$. The removal efficiency was about 70.1%. The amount of ozone required for the removal of the fluorescent whitening agent in the permeated water in SMBR was $6.67g-O_3/min$, and the amount of ozone required to remove $COD_{Mn}$ relative to the permeate water was calculated to remove $0.997mg-COD_{Mn}$ for 1mg of $O_3$.

• 동의생리병리학회지
• /
• 제22권3호
• /
• pp.619-623
• /
• 2008

The purpose of this study was to observe the effects of antibacterial activities on various medicinal herbs. Medicinal herbs used this study was Curcuma aromatica, Scutellaria baicalensis, Angelica dahurica, Platycodon grandiflorum, Houttuynia corolata, and Forsythia saxatilis. To evaluation of the antibacterial effect, we used S. gallinarum(ATCC 9184), S. typhimurium(SAL-13, France), S. enteritidis (ATCC 10376), Escherichia coli(E-62, O78), and S. gallinarum(E. coli). Extracts from each medicinal herbs divided into 100mg/ml, 50 mg/ml, 25 mg/ml, and 12.5 mg/ml. Antibacterial activities achieved by the paper disc test. Antibacterial activities was showed at extracts from Scutellaria baicalensis, Houttuynia corolata, Forsythia saxatilis, but little found at Curcuma aromatica, Angelica dahurica, Platycodon grandiflorum.

• 한국주조공학회지
• /
• 제26권6호
• /
• pp.267-271
• /
• 2006

Metal foam is a class of attractive materials, which exhibits unique combinations of physical, mechanical, thermal, electrical and acoustic properties. In particular, it is light and good at absorbing energy, which makes it attractive in automotive and aerospace applications weight is critical. In this paper, the Mg alloy foam was prepared by melt foaming method by addition of calcium as thickening agent, and $TiH_2$ or $CaCO_3$ powder as blowing agent. The macrostructural observation of foamed Mg showed that the pore structures of Mg alloy foam made by $CaCO_3$ as blowing agent were much better than that of foams made by $TiH_2$ as blowing agent. In addition, this paper showed the possible reason of fabrication magnesium alloy foam in proportion to blowing agent and the porosity range was about 40 to 76% as results value.

• 약학회지
• /
• 제5권1호
• /
• pp.3-5
• /
• 1960

Trace elements in deer horn have been determined Ca, Mg, Fe, Cu, Zn, Mn, Al and as were detected by partition paper chromarography and spectroscopic method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.145-146
• /
• 2011

A micro-grid (MG) is usually interconnected to the main grid through the dedicated line. Immediately after the removal of the grid supply, the MG should be disconnected and remain disconnected until the main grid is re-energized. It should detect islanding condition as soon as it happens to adjust the setting of the protection relays in the MG. This paper proposes an islanding detection algorithm for the MG based on the active and reactive power delivered to the dedicated line in the time domain. The performance of the proposed algorithm is verified under islanding conditions and fault conditions using the PSCAD/EMTDC simulator. The results indicate that the proposed algorithm can discriminate the islanding conditions from the various fault conditions.

• 한국정보통신학회논문지
• /
• 제6권7호
• /
• pp.1074-1078
• /
• 2002

본 논문에서는 main gate(MG)와 side gate(SG)를 갖는 double gate(DG) MOSFET를 디자인하고 TCAD를 이용하여 시뮬레이션하였다. MG와 SG의 길이(LMG, LSG)는 각각 50nm, 70nm로 하였으며, MG와 SG의 전압(VMG, VSG)이 각각 1.5V, 3.0V일 때 드레인전압(VD)을 0에서 1.5V까지 변화시키면서 핀치오프특성을 조사하였다. LMG가 아주 작음에도 불구하고, 핀치-오프특성이 아주 좋게 나타났다. 이것은 DG MOSFET의 VMG가 게이트를 제어하는 역할을 잘 수행하여 나노 구조에서 유용한 구조임을 알 수 있었다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 춘계학술대회 논문집(Proceeding of the KOSME 2000 Spring Annual Meeting)
• /
• pp.115-121
• /
• 2000

As the development of industry water quality of river is going to bad because of waste water of an industrial complex and general home agricultural chemicals exhaust of $SO_3$ and CO gas acid rain and so on. Corrosion damage of boiler factory equipment and so forth occur quickly due to using of the polluted water resulting in increasing leak accident. Especially working life of hot water boiler using the polluted water becomes more short and energy loss increases. The cathodic protection method is the most economical and reliable one to prevent corrosion damage of steel structures. Mg-base alloys galvanic anode protection of cathodic protection method is suitable for than application of hot water boiler using water with high specific resistance such as tap water. This paper is studied on the cathodic protection characteristics of how water boiler. In tap water and 0.001mol/$\ell$ NaCl solution the characteristics of anodic polarization of Mg-base alloys galvanic anode and tube material is investigated the measurement of cathodic protection potential according to the time elaspsed is carried out.

• 한국산업융합학회 논문집
• /
• 제5권3호
• /
• pp.213-218
• /
• 2002

Total nitrogen is a major pollutant which mostly causes eutrophication and red tide. Wastewater effluent from printing of cotton-viscose rayon containing high concentrations of total nitrogen can not be effectively treated with a typical biological treatment process. This paper provides a new treatment process and experimental results for the removal of high strength nitrogen from dyeing wastewater. The optimum conditions of air stripping for the removal of total nitrogen include around pH 12, temperature $60^{\circ}C$ with 60 minutes of stripping time. In case of a filtration-air stripping process, an initial level ($500mg/{\ell}$) of total nitrogen was significantly reduced to below $60mg/{\ell}$. Deconite was synthesised for further decomposition of organic nitrogen. Thus, a filtration-decomposition-air stripping process was possibly achieved, by which a high level ($900mg/{\ell}$) of total nitrogen was effectively removed to below $60mg/{\ell}$ P. Finally, a continuous new process for the removal of total nitrogen is proposed and confirmed, based on batch experimental results, and its process validity is further discussed throughout.