• 한국전기전자재료학회논문지
• /
• 제16권12S호
• /
• pp.1237-1241
• /
• 2003

In this paper, we report a novel RF-MEMS packaging technology with lightweight, small size, and short electric path length. To achieve this goal, we used the ultra thin silicon substrate as a packaging substrate. The via holes lot vortical feed-through were fabricated on the thin silicon wafer by wet chemical processing. Then, via holes were filled and micro-bumps were fabricated by electroplating. The packaged RF device has a reflection loss under 22 〔㏈〕 and a insertion loss of -0.04∼-0.08 〔㏈〕. These measurements show that we could package the RF device without loss and interference by using the vertical feed-through. Specially, with the ultra thin silicon wafer we can realize of a device package that has low-cost, lightweight and small size. Also, we can extend a 3-D packaging structure by stacking assembled thin packages.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 추계 기술심포지움
• /
• pp.124-128
• /
• 2001

We apply for the first time a low cost and loss wafer level packaging technology for RF-MEMS device. The proposed structure was simulated by finite element method (FEM) tool (HFSS of Ansoft). S-parameter measured of the package shows the return loss (S11) of 20dB and the insertion loss (S21) of 0.05dB.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1972-1975
• /
• 2002

In this paper, we have proposed low temperature co-fired ceramic (LTCC) based packaging for RF MEMS devices. The packaging structure is designed and evaluated with 3D full field simulation. 50 ${\Omega}$ matched coplanar waveguide(CPW) transmission line is employed as the test vehicle to evaluate the performances of the proposed package structure. The line is encapsulated with the LTCC packaging lid and connected to the via feed line. To reduce the insertion loss due to the packaging lid, the cavity with via post is formed in the packaging lid. The performances of the package structure is simulated with the different cavity depth and via-to-via length. Simulation results show that the proposed package structure has reflection loss better than 20 dB and insertion loss lower than 0.1 dB from DC to 30 GHz with the cavity depth and via-to-via length of 300 ${\mu}m$ and 350 ${\mu}m$, respectively. To realize the designed package structure, the cavity patterning is tested using the sandblast of LTCC.

• 마이크로전자및패키징학회지
• /
• 제15권2호
• /
• pp.29-36
• /
• 2008

본 연구에서는 MEMS 소자의 직접화 및 소형화에 필수적인 through-wafer via interconnect의 신뢰성 문제를 연구하였다. 이를 위하여 Au-Sn eutectic 접합 기술을 이용하여 밀봉(hermetic) 접합을 한 웨이퍼 레벨 MEMS 패키지 소자를 개발하였으며, 전기도금법을 이용하여 수직 through-hole via 내부를 구리로 충전함으로써 전기적 연결을 시도하였다. 제작된 MEMS 패키지의 크기는 $1mm{\times}1mm{\times}700{\mu}m$이었다. 제작된 MEMS패키지의 신뢰성 수행 결과 비아 홀(via hole)주변의 크랙 발생으로 패키지의 파손이 발생하였다. 구리 through-via의 기계적 신뢰성에 영향을 줄 수 있는 여러 인자들에 대해서 수치적 해석 및 실험적인 연구를 수행하였다. 분석 결과 via hole의 크랙을 발생시킬 수 있는 파괴 인자로서 열팽창 계수의 차이, 비아 홀의 형상, 구리 확산 현상 등이 있었다. 궁극적으로 구리 확산을 방지하고, 전기도금 공정의 접합력을 향상시킬 수 있는 새로운 공정 방식을 적용함으로써 비아 홀 크랙으로 인한 패키지의 파괴를 개선할 수 있었다.

• ETRI Journal
• /
• 제33권5호
• /
• pp.802-805
• /
• 2011

This letter presents a K-band polarization reconfigurable antenna integrated with a silicon radio frequency MEMS switch into the form of a compact package. The proposed antenna can change its state from linear polarization (LP) to circular polarization (CP) by actuating the MEMS switch, which controls the configuration of the coupling ring slot. Low-loss quartz is used for a radiating patch substrate and at the same time for a packaging lid by stacking it onto the MEMS substrate, which can increase the system integrity. The fabricated antenna shows broadband impedance matching and exhibits high axial ratios better than 15 dB in the LP and small axial ratios in the CP, with a minimum value of 0.002 dB at 20.8 GHz in the K-band.

• 센서학회지
• /
• 제20권1호
• /
• pp.58-63
• /
• 2011

A low loss radio frequency(RF) micro electro mechanical systems(MEMS) switch driven by a low actuation voltage was designed for the development of a new RF MEMS switch. The RF MEMS switch should be encapsulated. The glass cap and fabricated RF MEMS switch were assembled by the Au/Sn eutectic bonding principle for wafer-level packaging. The through-vias on the glass substrate was made by the glass dry etching and Au electroplating process. The packaged RF MEMS switch had an actuation voltage of 12.5 V, an insertion loss below 0.25 dB, a return loss above 16.6 dB, and an isolation value above 41.4 dB at 6 GHz.

• Journal of electromagnetic engineering and science
• /
• 제6권2호
• /
• pp.135-145
• /
• 2006

This paper presents the theory, design, fabrication and characterization of the novel low actuation voltage capacitive shunt RF-MEMS switch using a corrugated membrane with HRS MEMS packaging. Analytical analyses and experimental results have been carried out to derive algebraic expressions for the mechanical actuation mechanics of corrugated membrane for a low residual stress. It is shown that the residual stress of both types of corrugated and flat membranes can be modeled with the help of a mechanics theory. The residual stress in corrugated membranes is calculated using a geometrical model and is confirmed by finite element method(FEM) analysis and experimental results. The corrugated electrostatic actuated bridge is suspended over a concave structure of CPW, with sputtered nickel(Ni) as the structural material for the bridge and gold for CPW line, fabricated on high-resistivity silicon(HRS) substrate. The corrugated switch on concave structure requires lower actuation voltage than the flat switch on planar structure in various thickness bridges. The residual stress is very low by corrugating both ends of the bridge on concave structure. The residual stress of the bridge material and structure is critical to lower the actuation voltage. The Self-alignment HRS MEMS package of the RF-MEMS switch with a $15{\Omega}{\cdot}cm$ lightly-doped Si chip carrier also shows no parasitic leakage resonances and is verified as an effective packaging solution for the low cost and high performance coplanar MMICs.

• 한국전자파학회지:전자파기술
• /
• 제13권2호
• /
• pp.60-70
• /
• 2002

최근 고성능/고집적 RF 소자 및 시스템들의 경박 단소화 추세에 따라 RF 무선 통신 분야에도 초소형미세 가공 기술인 MEMS 기술이 크게 주목받고 있다. 이에 본 고에서는 RF 부품 및 시스템을 MEMS 기술로서 실장하는 RF MEMS 패키지 기술에 대하여 간단히 살펴보았다. 우선, 실리콘 기반의 MEMS 패키지가 우수한 열 전달 특성과 저 손실의 고주파특성으로 인해 RF 시스템의 실장에 매우 적합함을 확인하였다. 또한, MEMS 기술을 이용함으로써 RF회로와 패키지 제작 공정이 동시에 이루어질 수 있도록 하는 일괄터리공정에 대하여 소개하였다.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.165-172
• /
• 2005

In MEMS (Micro-Electro-Mechanical System), packaging induced stress or stress induced structure deformation becomes increasing concerns since it directly affects the performance of the device. In the decoupled vibratory MEMS gyroscope, the main factor that determines the yield rate is the frequency difference between the sensing and driving modes. The gyroscope, packaged using the anodic bonding at the wafer level and EMC (epoxy molding compound) molding, has a deformation of MEMS structure caused by thermal expansion mismatch. This effect results in large distribution in the frequency difference, and thereby a lower yield rate. To improve the yield rate we propose a packaged SiOG (Silicon On Glass) process technology. It uses a silicon wafer and two glass wafers to minimize the wafer warpage. Thus the warpage of the wafer is greatly reduced and the frequency difference is more uniformly distributed. In addition. in order to increase robustness of the structure against deformation caused by EMC molding, a 'crab-leg' type spring is replaced with a semi-folded spring. The results show that the frequency shift is greatly reduced after applying the semi-folded spring. Therefore we can achieve a more robust vibratory MEMS gyroscope with a higher yield rate.

• 마이크로전자및패키징학회지
• /
• 제10권1호
• /
• pp.31-38
• /
• 2003

MEMS 소자는 현재의 전자산업환경에서 여러 요구조건을 만족시킬 수 있는 특징을 갖추고 있으며 이러한 MEMS 소자를 이용한 MEMS 구조물의 packaging 방법에 있어서는 내부 MEMS 소자의 동작을 위한 외부 환경으로부터의 보호를 위하여 Hermetic sealing에 대한 요구를 충분히 만족시켜야 한다. 본 논문에서는 이와 같은 MEMS device의 진공 패키지를 구현함에 있어서 기판내부에 수동소자를 실장할 수 있는 LTCC 기술$^{1)}$ 을 이용하여 진공 패키징하는 방법에 대하여 소개한다. 본 기술을 이용하는 경우 기존의 Hermetic sealing이외에 향후 적층 기판 내부에 수동소자를 내장시켜 배선 길이 및 노이즈 성분을 감소시켜 더욱 전기적 성능을 향상시킬 수 있는 장점이 있게된다. 본 논문에서는 LTCC기판을 이용하여 패키징 시킨 후, 내부 진공도에 영향을 줄 수 있는 계면들에서의 시간에 따른 진공도 변화로부터 leakage rate를 측정 (stacked via : $4.1{\pm}1.11{\times}10^{-12}$/Torr1/sec, LTCC 기판/AgPd/solder/Cu의 여러 가지 계면구조: $3.4{\pm}0.33{\times}10^{-12}$/ Torrl/sec)하여 LTCC 기판의 Hermetic sealing 특성에 관하여 조사하였다. 실제 적용의 한 예로 LTCC 기술을 이용하여 Bolometer를 성공적으로 진공패키징할 수 있었으며 실제 관찰된 이미지를 함께 소개한다.