• Title/Summary/Keyword: MARK3

검색결과 804건 처리시간 0.206초

A Study of Robust Watermarking Technique against MP3 and AAC Audio Compression (MP3 와 AAC 압축에 강인한 오디오 워터마킹 기술에 관한 연구)

  • Lee, Han-Ho;Kim, Jong-Weon;Choi, Jong-Uk
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 한국정보처리학회 2001년도 춘계학술발표논문집 (상)
    • /
    • pp.213-216
    • /
    • 2001
  • 본 논문은 심리음향모델과 주파수변환을 이용하여 MP3 와 AAC 의 압축에서 강인하게 살아남을 수 있는 디지털 오디오 워터마킹 알고리즘에 관한 것이다. 워터마크를 의사난수열이나 이미지 등 외부 정보를 이용하지 않고 원본음악으로부터 생성시킨다는 것이 본 논문의 가장 큰 특징으로 원본 오디오로부터 생성된 워터마크는 음악과 융합되어 워터마크의 삽입여부를 일반인의 청각으로는 인식할 수 없다.

  • PDF

Investigation of Streaky Mark Defect on Hot Dip Galvannealed IF Steel

  • Xinyan, Jin;Li, Wang;Xin, Liu
    • Corrosion Science and Technology
    • /
    • 제9권3호
    • /
    • pp.109-115
    • /
    • 2010
  • Interstitial-free (IF) steels are widely used for car body material. However, a few types of streaky mark defect are commonly found on hot dip galvannealed (GA) IF steel sheets. In the present study, both the phase structure of a streaky mark defect and the microstructure of the substrate just below it were characterized by optical microscopy (OM) and scanning electron microscopy (SEM). It was found that the bright streaky mark area was composed of ${\delta}$ phase while the dark normal area was full of craters. More than half of the grains at the uppermost surface of the substrate just below the streaky mark defect are unrecrystallized grains which could result from lower finish rolling temperature during hot rolling and be kept stable during the annealing process, while almost all the grains in the normal area are equiaxed grains. In order to confirm the effect of the unrecrystallized grains on the coating morphology, hot dip galvannealing simulation experiments were carried out in IWATANI HDPS. It is proved that the unrecrystallized grains accelerate the Fe-Zn reaction rate during galvannealing and result in a flatter coating surface and an even coating thickness. Finally, a formation mechanism of the streaky mark defect on the hot dip galvannealed IF steel sheet was discussed.

Recognition of Special Vehicles Using Roof Marks (루프 마크를 이용한 특수차량 인식)

  • Kim, Seok-Young;Lee, Jaesung
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 한국정보통신학회 2016년도 추계학술대회
    • /
    • pp.293-296
    • /
    • 2016
  • In case of an emergency on a busy road of a city, drivers should make way for special vehicles such as police cars, fire engines, or ambulance as soon as possible. If road infrastructures recognize the movements of special vehicles, and transfer alert message to traffic signal controllers and normal cars through wireless network such as WAVE or TPEG, normal cars can prepare to make way in advance. As a result, it help special vehicles move faster. In this paper, we install a roof mark on the roof of a special vehicle, detect the mark through a mark recognition algorithm which includes perspective transformation, and get the inner information by decoding the digital pattern on it. The experiment results show that mark can be recognized 100% and 93.3% of inner digital data of the mark can be recognized, when the size of a mark is larger than $88cm{\times}88cm$ and the mark moves at a speed of 50km/s.

  • PDF

A study on the O'Leary index and dental plague index of dental patients (치과내원 환자의 올리어리(O'Leary) 지수와 개별치아의 치면세균막 지수에 관한 연구)

  • Park, Sung-Suk;Cho, Pyeong-Kyu
    • Journal of Korean society of Dental Hygiene
    • /
    • 제9권3호
    • /
    • pp.426-438
    • /
    • 2009
  • The purpose of this study was to examine the relationship of the general characteristics of dental patients to their total O'Leary index and individual plaque indexes in a bid to check the oral hygiene state of citizens and evaluate their plaque management ability. The subjects in this study were 288 patients at dental hospitals and clinics in Busan and South Gyeongsang Province. A survey was conducted from September to November 2008. The findings of the study were as follows: 1. Overall, the O'Leary index of the patients investigated stood at 72 percent. By age and gender, the O'Leary index was highest among those in their 30s(83%) and among the women(75%)(p<.05). As to the influence of toothbrushing frequency, the patients who did it twice or more a day had the highest O'Leary index(75%)(p<.001). By the use of oral hygiene supplies, the patients who used oral hygiene supplies had a higher O'Leary index(76%) than the others who didn't(p<.01). 2. As for plaque index for each tooth, 28 percent of their teeth were given zero point, and 52 percent were given one mark. 13 percent were given two marks, and 6.3 percent were given three marks. Thus, the teeth that were given one mark were largest in number(p<.001). 3. As for plaque index for labial posterior mandibular, 43 percent of their teeth were given one point, and 36 percent were given zero mark. 14 percent were given three mark, and 5 percent were given three marks(p<.01). 4. As for plaque index for buccal posterior maxilla, 57 percent of their teeth were given one point, and 20 percent were given zero mark. 16 percent were given two mark, and 6.3 percent were given three marks(p<.01). 5. As for plaque index for lingual posterior mandibular, 56 percent of their teeth were given one point, and 27.8 percent were given zero mark. 9 percent were given three mark and 6 percent were given three mark(p<.001).

  • PDF

A Study on Results of Rehabilitation Therapy of Patients with Head Injury (두부손상 환자의 재활치료 결과에 관한 연구)

  • Kim, Su-Min;Lim, Hye-Hyeon
    • Journal of Korean Physical Therapy Science
    • /
    • 제1권1호
    • /
    • pp.135-144
    • /
    • 1994
  • The authors studied therapeutic effects and related clinical data retrospectively on a series of 48 consecutive patients with head injury who were referred to physical therapy and occupational therapy, Kosin University Medical Center during 1 year, from March, 1993. through March, 1994. The conclusions were as follows : 1. Average age of the subject patients was 50.6 years, their age remped from 14 to 72 years, and the incidence between male and femele was 1:1.1. 2. In respect to the educational level high school graduates showed the highest incidence 18 (39.1 %) of 46 cases, and in respect to economy level, middle class revealed the highest incidence, 31(64.6 %) in 48 cases. 3. The HBP was the most common cause of spontaneity injury, disclosing 19 cases in 35 patients(54.3%), whereas the main cause of traumatic injury was a traffic accident, 7 cases ( 53.8 %) in 13 patients. 4. As for the region of injury in the cases of spontaneity ICH was 14 persons (40%). In the cases of trauma, hematoma was seen in 6 cases(42.2 %) in 48 total cases ICH was seen in 17 cases (35.4 %) to be the most common region. 5. Among 35 persons, spontaneity CBR was the highest region of injury, 13 cases(37.1 %) ; the side of paralysis in extremities the right side showed higher incidence, 18 cas (1.4 %) as compared to the left, 16 cases(45.7%). In the case of traumatic injury, CBR was the highest region of injury, 4(30.8% )in 13 cases and as for the paralysis side, right side showed higher incidence 7 cases(53.8%) as compared to the left side 5 cases(38.5%). 6. In respect to recurrence, HBP was seen in 5 cases to be the most common cause, and as for the region of injury, CBR was the highest. 7. A period of rehabilitation therapy in the cases of physical therapy the highest term was 1-2 month, 14 persons(29.2%). As for occupational therapy within 2 week-term was the highest, 24 persons(50%). 8. Physical strenth grade M.T in the cases of the upper extrimities before therapy, the low mark(grade 0) was 30 cases(62.5%), compared to the high mark(above grade 3)seen in 1 case(2.1%), And after therapy, the lowest mark(grade 0)was seen in 5 cases(10.4%) where as the high mark(above grade 3)was seen in 29 cases(60.4%). In the case of the lower extremities before therapy, the mark(below grade 1)was 37 cases(77.1 %), while the high mark(above grade 3)was seen n 4 cases(8.4%). And after therapy the low mark(below grade 1)was seen in 5 cases (10.4 %) and the high mark (above grade 3)was seen in 29 cases(60.4 %). 9. Before therapy conigtive function-level evaluation utilized R.L.A.L, the low mark(below level 3)was seen in 9 cases(18.8%), while the high mark(above level 7)was seen in 18 cases(37.5%). And after therapy the low mark (below level 3)was 4 cases(8.3%) and high mark(above level 7)was seen in 38 cases(79%). 10. After rehabilitation therapy, patients who were able to walk independently were 29 persons(60.4%), among which 16 cases(55.2%) depended on cane. The ratio between the cases who were able to walk and unable to walk was 1.5:1.

  • PDF

PERFORMANCE EVALUATION OF DIGITAL DATA PROCESSING SYSTEM FOR KOREAN VLBI NETWORK(KVN) (KVN을 위한 디지털 데이터 처리 시스템의 성능평가)

  • Oh, Se-Jin;Roh, Duk-Gyoo;Yeom, Jae-Hwan;Byun, Do-Young;Lee, Chang-Hoon;Chung, Hyun-Soo;Je, Do-Heung;Wajima, Kiyoaki;Kawakami, Kazuyuki
    • Publications of The Korean Astronomical Society
    • /
    • 제22권3호
    • /
    • pp.63-73
    • /
    • 2007
  • In this paper, we introduce the performance test results of digital data processing system for KVN (Korean VLBI Network). The digital data processing system for KVN consists of DAS (Data Acquisition System) and high-speed recorder which called Mark5B system. DAS system performs the digitalization of analog radio signal through ADS-1000 gigabit sampler with 1 Gsps/2-bit and process the digital filtering of digital signal. Mark5B system records the output data of DFB (Digital Filter Bank) with about 1 Gbps. In this paper, we carried out the preliminary evaluation experiments of the KVN digital data processing system connected between DAS system and Mark5B with VSI (VLBI Standard Interface) interface which is designed for compatible in each VLBI system. We first performed all of the KVN digital data processing system connected by VSI interface in the world. In factory inspection phase, we found that the DAS system has a memory read/write error in DSM (Digital Spectrometer) by analyzing the recorded data in Mark5B system. We confirmed that the DSM memory error has been correctly solved by comparing DSM results with Mark5B results. The effectiveness of KVN digital data processing system has been verified through the preliminary experiments such as data transmission, recording with VSI interface connection and data analysis between DSM and Mark5B system. In future work, we will perform the real astronomical observation by using the KVN 21m radio telescopes so as to verify its stability and performance.

Neutronics analysis of JSI TRIGA Mark II reactor benchmark experiments with SuperMC3.3

  • Tan, Wanbin;Long, Pengcheng;Sun, Guangyao;Zou, Jun;Hao, Lijuan
    • Nuclear Engineering and Technology
    • /
    • 제51권7호
    • /
    • pp.1715-1720
    • /
    • 2019
  • Jozef Stefan Institute (JSI), TRIGA Mark II reactor employs the homogeneous mixture of uranium and zirconium hydride fuel type. Since its upgrade, a series of fresh fuel steady state experimental benchmarks have been conducted. The benchmark results have provided data for testing computational neutronics codes which are important for reactor design and safety analysis. In this work, we investigated the JSI TRIGA Mark II reactor neutronics characteristics: the effective multiplication factor and two safety parameters, namely the control rod worth and the fuel temperature reactivity coefficient using SuperMC. The modeling and real-time cross section generation methods of SuperMC were evaluated in the investigation. The calculation analysis indicated the following: the effective multiplication factor was influenced by the different cross section data libraries; the control rod worth evaluation was better with Monte Carlo codes; the experimental fuel temperature reactivity coefficient was smaller than calculated results due to change in water temperature. All the results were in good agreement with the experimental values. Hence, SuperMC could be used for the designing and benchmarking of other TRIGA Mark II reactors.

SURFACE ANALYSIS OF CERCE RESTORATIONS POLISHED BY DIFFERENT TECHNIQUE (연마방법에 따른 Cerec block의 표면 거칠기 비교)

  • Kim, Sung-Gwang;Vang, Mong-Sook
    • The Journal of Korean Academy of Prosthodontics
    • /
    • 제35권1호
    • /
    • pp.31-42
    • /
    • 1997
  • This study was performed to investigate the surface roughness of the Cerec Vita Mark II polished by various polishing techniques, compare with that of the Vintage enamel porcelain glazed by high temperature glazing technique. All of the Cerec specimen were finished with sequential use of high speed diamond burs(grit 45, 30 and $15{\mu}m$). The groups were divided into 5 groups : Group I : Cerec Vita Mark II block specimens polished with Sof-lex discs. Group II : Cerce Vita Mark II block specimens polished with Two Striper MPS. Group III : Cerce Vita Mark II block specimens polished with Enhance. Group IV : Cerce Vita Mark II block specimens polished with Porcelain laminate polishing FG kit. Group V : Vintage enamel porcelain glazed by high temperature glazing Technique. Each group was consisted of 10 specimens. The surfaces produced were examined quantitatively using a laser specular reflectance machine(Perthen RM600-s, Feinpruf Perthen GmbH., Germany) and qualitatively under SEM(JSM-5400, JEOL, Japan). The Results were as follows : 1. The arithmetic mean roughness value(Ra) in groups 1, 2, 3 and 4 was higher than that of group5. There was statistically significant difference(P<0.05). 2. The arithmetic mean roughness value(Ra) decreased in the following orders : group 1, group 2, group 4, group 3 and there was no statistically significant difference between group 1 and group 2, group 3, and group 4. There was statistically significant difference among group 1, 2, and group 3, 4 and group 5(P<0.05). 3. The maximum individual peak-to-valley-height(Rmax) decreased in the following orders : group 2, group 1, group 4, group 3, group 5 and there was no statistically significant difference between group 1 and 2, group 1 and group 4, group 3 and group 5. There was statistically significant difference among group 1, 2, and group 1, 4 and group 3, 5(P<0.05). 4. The treated surfaces of group 5 had smoother surface than that of groups 1, 2, 3, 4 with SEM.

  • PDF

Textural Characters of the Overwash Mark Sediments on the Berm of the Nobong Beach Environment, East Sea of Korea (동해안 해빈(노봉 해빈) 환경의 Overwash Mark 퇴적물의 조직 특성)

  • 박용안;최경식;김수정
    • The Korean Journal of Quaternary Research
    • /
    • 제14권1호
    • /
    • pp.1-5
    • /
    • 2000
  • During the last three years (1997∼2000), a research project of beach dynamic environmental process and dynamic nature of the Nobong Beach, East Sea of Korea has been carried out for a better understanding of beach cycle (winter and summer). In fact, however, this paper deals with a particular feature of beach dynamics, that is, overwash process of overwash water and its sediments. The overwash mark sediments (OMS) are analyzed to understand various textural characters.

  • PDF

A Study on the Design of OMCR(Optical Mark and Character Reader) System based on Image Processing (영상처리방식에 의한 OMCR 시스템 설계에 관한 연구)

  • 이기돈;김우성
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • 제18권9호
    • /
    • pp.1358-1367
    • /
    • 1993
  • In this paper, OMR system based on image processing is developed which improve the performance of conventional OMR system based on line-scan method. Based on this OMR system, real-time OCR system which recognizes alphanumerics is also developed. We propose the OMCR system which recognize the mark and numerals at the same time. Besides, we improve the input system using constrained 7-segment type handwritten numeral instead of mark to solve the problem caused by miswriting the mark. In summary, we verified the reai-time recognition performance of developed OMCR system using application form for admission, answer sheet for college entrance examination and receipt sheet.

  • PDF